Never pull the quick start cord more than three times you can risk flooding the engine. You should’ve just put on the choke. You don’t have to use the choke right after it’s been running for a while and you want to turn it back on.
I’m not no specialist. I don’t even have one yet. It’s coming soon. I just watched so many tutorials and know a lot about it before I bought one and I was just trying to help lol chill
@@user-dz9pq4km9m Do you have any small engine experience? I actually bought another cheap Chinese one like that there in the video, like 3 months ago or so. It is green, and I snapped the frame up front, bent something in the rear suspension, in the same crash, within like the first two weeks of owning it. But with tunning small engines, you can set things like pop off pressure inside the carburetor when modifying it, change the sizes of the needles. They also put those motors on these stand up scooters called gopeds, check my other videos.
@@rabbitfootedkitty1339 I have a little bit of experience, not too much I know about a four stroke engine in a dirtbike bike and I have small experiences with engines I do have some questions, though if you don’t mind me asking about when I get my buggy it’s I’m going to get it in a few weeks
what type of chain tensioner do you have? I purchased my GSR46R about 6 months ago, I have the 4 stroke engine mount, and I mounted a Honda GX35 4 stroke engine to it. Yours is totally rad!
It looks like I was just running the Ada gsr46 tensioner then, but it’s fine to run without it. It doesn’t make a difference for how well you have your chain and sprockets set up, the Chinese garbage #25 chain just gets destroyed after a handful of miles and it’s worthless. Eventually the sprockets just get torn up because all the links bind up. I’ve tried T8F chain on another stand up scooter, but that’s Chinese as well and has the same issues. I’ve yet to put a real motorcycle chain on a Goped and I’m not sure if that will happen in this life of mine or not.
@@rabbitfootedkitty1339 ok, thanks for the info, so I should expect to have chain issues on my GSR46R? I did use chain lube, hoping that will keep it going for a while. If you find a better chain, please let me know and I will replace mine too. Thanks for the info.
@@zmanvideo1 Yeah I think I even had bad luck on the propane Goped scooter I was messing around with a while ago, which is like the lowest powered Goped engine in existence. Spindle drive either like a Goped sport or Bigfoot is probably the most reliable drivetrain option, nothing but the engine to go wrong really. I haven’t checked recently with different brands of #25 chain, but I remember it to be all the same garbage anyways. Maybe it will last a bit longer for you and your small slow 4 stroke. Also you said that scooter in my video was rad, clearly you’ve been under a rock or are brand new to gopeds. Just look up Derek short tangerine dream ped, Goped with polini engine, or something.
@@rabbitfootedkitty1339 ok, thanks for the info, yes I am new to gopeds, although I have been eyeing them for quite some time, I will check out Derek's videos.
@@trumpismypresident3748 everywhere but the description of this here video, which says it’s from the Philippines and the company that made it is called MV14
I ordered 2 of them and used one for this build. It’s Factory Pipe’s “Goped” pipe, but I’m pretty sure based off of the mount bracket, it was designed specifically for a sport. Not sure if they’re still in stock anymore because they don’t say in their website, I believe they’ve stopped producing them, and you have to place orders with them over the phone only. I’d say the best part about it aside from the unique shape is it has an o ring seal between the exhaust manifold and the pipe so it actually won’t leak like any old DDM sikk toys pipe crap.
@@rabbitfootedkitty1339 Unfortunately these pipes are no longer available and the company said they will not produce anymore of them. I have been trying to find one in nice condition for a few years but they are all either cut up/hacked up and modified beyond repair or they are damaged/missing parts or they don't want to sell them. The only options on the market for new goped sport pipes are the jetpro, rattlesnake and ddm dominator pipes, everyone else is either discontinued or out of stock(Even sikk toys pipes)
@@briang4470 why do you think I bought two of them? lol. I still have one unboxed, virgin, un-raped, ready to be used by some Goped crack meth head like a cum dumpster
@@rabbitfootedkitty1339 that's was a smart move, everyone is always looking for goped pipes(especially rare ones) and people nowadays want an arm and a leg for them. The cheap $100 sikk pipes have been out of stock for over a year and I don't think they will ever be back in stock, jetpro is very expensive and takes a while to get(is good quality though) and the ddm dominators suck, they are poor quality and break all the time, rattlesnake(dean) seems to be the best bang for the buck nowadays.
@@briang4470 and honestly I think people who pay for that shit are fucking dumb when the southeastern Asians are making them okay-decent quality for comparably pennies on the dollar, just cost a bit of money for international shipping
I remember going from an LH to a G230RC out the box it was like 33mph. the G2D was a bit faster then a LH but will keep up with a G230RC. Just in the middle or a re build with an zenoah OBR 30.5 race ported engine
@@Madmike908 I bought some Chinese clutch bell housing from the Jeff bassos website Amazon and made it all work somehow, I have a video of it actually somewhere on my channel
You may have used JBWeld to keep a plastic piece on the carb, i used ShooGoo (glue) to glue back the plastic fuel inlet at the bottom of the carb. to this day i still run that carb because it doesn't leak and holds a tune lol
Don't know what is up with the child porn thing..... But get that shit out of here.... If you are joking, it is just creepy and disgusting.... If it is something you are actually interested in, get some help. Or maybe i should just call the cops and let them come and check your computer and your family's computers and phones.
You live in the best state in the USA they just made all weed tests legal do you have any idea how many doctors we have to go through how many jobs we have to get fired from y'all don't understand what you have fr
@@unknownanon4993 The best state where crime is so up that bussiness can't bloom, taxes are high, price of living takes your whole check and homeless people make you uncomfortable every place you go. But I guess having access to weed is all you need
hey bud just wanted to ask which one of the r460 engine is better the blue clutch or the yellow one? and what is the exact size for the spacer and apacer's axle? thanks alot😊
@@MrPortelma1 it was only 35cc, and I kind of got rid of it because the transmission was problematic, but I shouldn’t have because the engine ran really good actually
Probably about 10mm (1cm), whatever the length needs to be to align the front sprocket to the rear one. I can measure it at my work with the calipers. My next step for this thing is, since it’s so freaking fast with this other motor I had David pennock build for me, it keeps shredding up chains. I was going to buy some 1/4” sheet aluminum or steel and replace those rear frame/engine and gas tank mount plates with these big ass plates of metal, and then do some super custom stuff possibly I might need a lathe for or something, and mount a jack shaft to run like mini bike #40 chain, to make it actually reliable.
PFC Eurobeat I think, WorldPac/IMC, but WorldPac/IMC is sort of “commercial” only, so you either need to have a commercial account set up with them, or con your local automotive repair shop into ordering your parts from them at a hopefully cheapest cost. Brands I think were Bilstein for shocks, possibly OEM R129 chassis bump stops for those front shocks, ISG for the front shock rubber mounts to the frame, Lemforder front control arms, forgot the brand for tie rods possibly Chinese or Indian made cheap shit, Textar front brake pads, and Febi makes some other garbage I might have used to fix up this car. Would definitely not recommend buying an old ass Mercedes like this unless if you are either Rich or Retarded because lots of important quality parts are unobtainuim. Buy an old Honda civic. It’ll be cheaper, faster, and more reliable.
