@@WTFRCCars Can i use voltage regulator instead of Ubec? if yes? How should I wire them? If no, i'll need to get ubec and need the diagram to follow! I am learning. Thank you
I can’t bind my ttx300 transmitter and receiver tr325 to my Kraton 6s at all I wish you were here to help me 😭😭😭😭 having so much problems and it’s a brand new and the reciever light won’t even turn on anymore 🤦🏾♂️🤦🏾♂️
…when flysky nb 4 pro get edgetx support…yes…there is something in the works there!!!…i will buy it immediately…for now im with radiomaster mt12…of course…(but waiting eagerly for companion support)…completely open programming…open source development…multi protocol of course…(actually flysky rx in all cars for the moment!!!)…radio protocol module possibility…faster longer and more stable radio link…cheaper…large friendly creative community…check it out!!!…
Hi so for the phone number you have to use international dialing code so UK a mo Ile with 09878765272 would be +449878765273 and use PNMWAX as the invitation code then request the code when you receive the txt add the password and the txt code then full in your details on the next screen you should be good to go
Any tricks to have this work for the rear in 4ws mode? I really like the look and scale realism the slowed steering gives but didn't see way to affect the rear steer.
Just got myself a Flysky G7P (actually an Absima CR7P which is the same apparently) Seems like a great transmitter but not easy to master, and without your videos here I would be totally lost trying to make sense of navigating the menus so a huge thank you from me. (subscribed and liked)
Great video !! Thankyou I just got this setup and after 4 trips to hobby store got it going lol. They dont tell you you need a programmer or battery adapters lol. Bad day great video thankyou sir!
Omg. Lol. That's a pretty important step to leave out of the manual. Just tested it out on my Thrustmaster T300RS steering wheel and pedals and it works perfectly! Thanks for getting this figured out, brother!
Yeh did a vid running with them in my yokomo MD 2.0 drive RC and they work fantastic in that and will also be testing them in my D2 Evo 2wd with a 5.5t brushless set up
@@WTFRCCars I double checked my older xbox, u know, just incase, nope lol. At times like this, looking after stuff becomes mute, would have replaced with newer models if constantly broke stuff 🙃 and wouldn't be around to tempt me to try time and time again 😆 Too old, 😱🥺😭😤 Feels like us vintage pieces are getting replaced, objects either alive or not 😂 Can't say much, just bought a t-shirt with nes controller bent over a zimmer frame. Says it all 🤣
dont buy rocket rc. Their quality is awful. People complain they burn on the first run. I have few, one of them changes settings randomly (sometimes on-the-go), the second lost its sensor connector and it looks like it was not well soldered.
Surpass are actually the OEM for a good few other manufacturers including hobbywing, their new v6 motors are right up there with some of the best around and are re branded for many other brands so not sure where you are getting your info from ?
Hi sir .. yesterday I ask mip him self if you have diffs gears for my tamiya frog he replied we dont they are really useless... anyway thanks for your video it's much needful and I will purchase the part on your video to my tamiya because I want to change the motor to brushless
Thanks for making this, man! I'm partially relieved because now I know it's not just my transmitter. The battery base was what I suspected as well, being that I have every device Flysky lists as supported (except for the Thrustmaster pilot controller) and they all work on my Pro, but not any on the Pro+. I really hope this gets a fix because I really wanna get several of these working for my Rocket League in real life events and for FPV racing with the steering wheel setup!
Figures. I ran into an issue trying to get my Pro+ recognised by my PC when updating it the very first time (assistant works fine though - just update/dfu mode) and had to pop the old base on. That being said, I've managed to get my PS4 controller working on my Pro+ twice out of 50 attempts. I still don't know how I got it working as there wasn't any pattern.
This is masterpiece 👏 bravo .for less then 100$ and 25$reciver and pretty much does what 400$ or 500$ does .why not . Ppl don't release that to fly 400$ plain u don't need spectrum or futaba.
It's a bad remote. Or I got a broken one. 90 hours of flying in simulators and it broke: YAW started pulling to the left, setting dead zones didn't help, calibration didn't save it. I even took it apart - to no avail. The deviation from the zero point is 32%! That's terrible. Good thing the store agreed to accept the remote control and refund the money - I ordered Radiomaster Pocket.
Hi I don't have that radio unfortunately but it is listed as compatible you will need to have one of the ports on the receiver set to ibus for the sensors to work if that helps
Hi WTF RC, I have the INR4GYB receiver. Can you use the CTM01 temp sensor on 1 channel say NPB and then have an IBUS2 GPS sensor on NPA. On my nb4 pro+ if I set NPB port on ibus in so the temp sensor works it won't allow me to select ibus2 on NPA. Same happens vice versa, if I have NPA set to ibus2 so the GPS works it will only allow Ibus2 on NPB and not ibus-in. It won't allow both sensors to work at the same time. Any insight??
@WTFRCCars thought so as it wasn't allowing me to choose different protocols for each channel. Thanks for your time, love the vids, really helped me setup my system.
@@WTFRCCars as a 1/8 buggy guy, speed is just as important as torque for me. Those larger 4wd vehicles often have a tendency to not want to turn once moving under power. Having the torque to fight the momentum of the wheels and vehicle and the speed to flick the car makes a huge difference.
does noble 4+ have the same display as the pro? more information as the pro. i use ibus 2 gps sensor with noble 4 but it cant record the data. so i want to upgrade to monitor accel or top speed. does the nb4+ has this ability?
Thanks for the info. Forgot how to set up the program cards for hobbywing as it's been years since I've used one. Just picked up this esc but the new G2 version for my drift car and stocked to get it dialed in.
