POOLCORP is the world's leading wholesale distributor of swimming pool equipment, parts and supplies, and related outdoor living products. The company operates approximately 440 locations worldwide with more than 6,000 employees through three primary distribution networks: SCP Distributors LLC, Superior Pool Products LLC, and Horizon Distributors Inc. Our Sales Centers each operate with full profit and loss responsibility, giving our organization an entrepreneurial spirit.
My PB told me not to get quartz because it streaks. Maybe it's the application...but seeing all the comments I have to think regular white plaster is the way to go.
Damn, I watched the whole thing expecting to see the results of all that labor, meaning the completed project, a pool filled with water! What a letdown.
Is quartscape aruba sky from the caribbean series an organic or inorganic product? If organic, how do you keep it from fading if you are using an oxidizer like chlorrine to mainain your pools correct ph and total water balance?
Interesting. We are getting our pool resurfaced with PMM Marquis Quartz surface and the application spec sheet specifically states NOT to hard trowel- that it only creates more work during the finishing stage. I wonder if it is a different formula. Here is the spec sheet: www.pmmproducts.com/files/pds_marquis-series.pdf
Isn't Quartzscapes and other quartz finishes just plaster with some dye and a little bit of tiny quartz flakes added in? We just had ours finished and that is what it looks like. Plaster. I don't see how it is any harder than plaster when that is what it is. I'd like to see some scientific testing that shows it is harder and more durable. Even if the quartz part is harder the finish is only as strong as it's weakest component and when that component is 95% of the finish then I think the answer to my question is obvious. Unless the plaster agent used along with the quartz is some kind of special plaster like substance but not regular plaster?
Holy Crap!! So we are having our pool quartz plastered in a week or so and we just picked the color out today. I decided to see how they apply it and I'm watching this thinking....I hope my contractor does a good job like this crew. Then at the end the guy thanks....the actual crew that's going to be doing my pool! lol. That's where I was today, Bakersfield Pool Plaster! Sweet. At least I know it will be done right!
Thank you so much for this video. We will soon be ready for plaster and I wanted to see what the process was and what to expect. Had I not watched this I would never had known the steps needed for a perfect finish. I hoping the company we are using is going to be following the national guidelines. I'll be out there watching to make sure they don't cut corners. Thanks again for outing this information out there!
My contractor didn't do any of the steps mentioned here, with exception of a little ragging. He fills the pool, adds about 8 gallons of acid, and tells the customer to brush the pool daily. He leaves it this way for about a week, The finished product is splotchy, and lousy looking. :-(
Hello Thomas, Sorry to hear about the appearance of your pool. that is precisely the reason why we made this video; to educate everyone on the "best practices" for application, exposure and start up. With time and some TLC there is a good chance that you pool finish will look better soon. Good luck
Hello, I’m about to have my pool re-plastered. My contractor is using the same quartz product from NPT over at Ontario, CA. What color was used for this project?
This is my first full summer with quartzscapes pool. It just looks terrible. It has white splotches all over the bottom sides and veining all over as well. When the pool was filling there was a cement like substance running down the walls at the tile line. I now have a white line on tile that I can't get off. I think it may be cement. I also have grout coming out. I had staining and white sandy looking areas when I opened the pool. I was told by my contractor that after startup I could close, but now the staining issupposedly because the chemicals "were not kept properly" through the winter. I don't know how I could have done that while closed. I have tested daily myself and once or twice weekly by professional and cannot keep the PH and Alkalinity stable. There are now bubbles showing on the walls and I have no idea how that is happening. The pool was very rough and is still rough where I can't get to brush real hard. I am so disappointed since I chose this very expensive finish. I think it needs to be completely redone. My warranty runs out in September. Any advise.
Hello Jane, You might want to contact your local pool service professional about performing an "in water treatment". This treatment tends to even out the coloration and exposure of the finish and is has proven itself time and time again for what you are describing above. Good luck
The "bubbles" on the walls are called delaminations. The plaster is not bonding to the gunite properly, this is a workmanship defect. However, if they have tested your chemicals and they are out of range, or if the plaster appears to can characteristics similar to chemical damage your warranty will be void.
Can this product be applied to refinish an existing pool plaster after aggressively etching the existing surface? What is the minimum application thickness. Also, can it be mixed with a admixture for better bonding to existing plaster?