Тёмный
Raptor's Garage
Raptor's Garage
Raptor's Garage
Подписаться
For 5 years, Chris and Paul built a fantastic following of subscribers, who eagerly awaited each Friday for the latest video to drop, documenting the vehicle builds, adventures, and beer tales coming from Paul’s garage.

So much time, effort, and dedication take their toll. For still yet unknown reasons, the pair went their separate ways.

I recently discovered Paul had decided to delete the Channel. Not only was it 5 years of hard work and expense, but it also became a fantastic resource for fellow off-road enthusiasts and Overlanders. It was always enjoyable to sit back with a beer and be reminded of the fun times we shared and the adventures we had.

With that in mind, I decided to set up the Channel again and load up all the videos we created.

I do plan to return - both Angela and I are set on building a capable camper/motorhome in the not-to-distant future. When I do, I plan to rename everything “Chester’s Chop Shop”, in memory of my incredible dog, Chester, who I lost in 2021.
Комментарии
@bernardgarrett3897
@bernardgarrett3897 День назад
Please fix the double electrical outlet. It's dangerous
@digga1667
@digga1667 Месяц назад
What happend to TEAM OVERLAND???
@scaryfakevirus
@scaryfakevirus Месяц назад
I get mixed reports about the twin inlet manifold. Some say they don't se much difference so it isn't worthy the cost. I don't know yet if I will bother. Isn't that Hi lift on the bonnet illegal?
@stevenwinfield5079
@stevenwinfield5079 2 месяца назад
When I put it on my xtrail that’s black raptored I found when it rained there was an oily residue on the car. Did you find this?
@bigrockets68
@bigrockets68 2 месяца назад
Hi there, Where do you get these tents from please?
@Allthingsdefender
@Allthingsdefender 3 месяца назад
Hi, I have just replaced my lift pump as per my video on my channel but I didn’t put in the spacer I wasn’t aware of it even thou my new pump came with it. I can’t see how by moving the lever away from the cam actually helps anything. I would think it would make the pump less efficient in my view as the cam won’t be touching the lever.
@marcelodagrella8295
@marcelodagrella8295 3 месяца назад
Discovery 1 😍
@alexandroardu2262
@alexandroardu2262 4 месяца назад
Hi, nice video😊 where can I buy the manifold? also used thanks regards
@marcelodagrella8295
@marcelodagrella8295 4 месяца назад
Discovery 1 😍
@jonathangabriel9365
@jonathangabriel9365 4 месяца назад
What sae of that oil you use
@gazeddy
@gazeddy 5 месяцев назад
and now im sat here looking at my d2 with an angle grinder next to me
@jackp-j1041
@jackp-j1041 5 месяцев назад
Hi, whats the maximum amount of power the engine can make with this inlet manifold, a VNT and an intercooler? Thanks
@t.g.5832
@t.g.5832 5 месяцев назад
@raptorsgarage will it work for 200tdi as well in D1 ??? Thanks
@t.g.5832
@t.g.5832 5 месяцев назад
it will be working with ESR4650 or PNH102120 pipes from td5 land rover
@t.g.5832
@t.g.5832 5 месяцев назад
@raptorsgarage will it work for 200tdi as well in D1 ??? Thanks
@t.g.5832
@t.g.5832 5 месяцев назад
it will be working with ESR4650 to get some additional offset.
@Latindanceindia
@Latindanceindia 7 месяцев назад
Loved the video. I have made a list what at I needed for my 300tdi..
@gregreed402
@gregreed402 7 месяцев назад
You guys are amazing 👍👍👍🍺🍺🍺
@raptorsgarage
@raptorsgarage 2 месяца назад
You rock!
@morganhill6200
@morganhill6200 7 месяцев назад
De best build I have seen, is it possible to have the cruise control working on the disco with the M57 installed.
@user-jy3kn4ed6f
@user-jy3kn4ed6f 7 месяцев назад
Did the engine had a reduction on the amount of black smoke produced?
@nachoplease1676
@nachoplease1676 8 месяцев назад
How stupid, didn’t even use the new boost controller.
@brucecutts8841
@brucecutts8841 8 месяцев назад
OK Chris and Paul I am on the cusp of buying a second hand TuffTrek Overland (like yours) but I have heard that if you are over 5'9 the bed length can be a bit short. Can you comment on the length issue at all or are you short enough for this nbot to have been an issue? My partner is 6' . Cheers
@Jaywood1985
@Jaywood1985 9 месяцев назад
As above, where’s part 8 ?
@user-ow5nz4ro5c
@user-ow5nz4ro5c 9 месяцев назад
Hi. Would you guys have a map route you took?
@richardgale8463
@richardgale8463 9 месяцев назад
It’s a good upgrade but the twin tube to the inlet plenum should have equal length tubes as you not gaining the balanced flow that your looking for
@orangutanfan3179
@orangutanfan3179 8 месяцев назад
as long as the y-piece is divided equally it shouldn't be a problem.
@tomskimcdouglegaming806
@tomskimcdouglegaming806 9 месяцев назад
The two pins are different. One with a rubber sheath, one without.
@connoryz125
@connoryz125 9 месяцев назад
Did this project get scrapped can’t seem to find pt 8 or the finished product
@liamfleming2561
@liamfleming2561 10 месяцев назад
What's hybred turbo set up? Im thinking about going way in the future
@JERRY1963ful
@JERRY1963ful 10 месяцев назад
16:12 November 7, 2023. I put an intake gasket on a 1997 disco. It will not crank at all. Any suggestions.
@millin2222
@millin2222 10 месяцев назад
Thats nice looking, can I ask have you got any ideas on how to remove raptor/bedliner. Its been put on my Defender 90 by cowboys, before I bought it. Would like it done again. Any idea would be useful thanks
@millin2222
@millin2222 10 месяцев назад
That's a massive difference and high
@gregreed402
@gregreed402 10 месяцев назад
Mate you need and under non net noise dampeners they are awesome
@dylonthedog1
@dylonthedog1 10 месяцев назад
Awesome video. Keep it up!
@marcuscoate2578
@marcuscoate2578 11 месяцев назад
Cleanest most oil leak free 300tdi I think I’ve seen😂
@chriswalker4272
@chriswalker4272 11 месяцев назад
My 97 90 300TDI Pick-up, Peggy, runs great completely stock, being the Yin to your Yang when it comes to weight lol. She runs great stock and well serviced, giving 30 MPG. I could easily run taller tyres she's drivable in 5th at 30mph, but I tow my carvan, as opposed to having a house on her back, so keep her factory. Your new inlet manifold mod seems a very logical step even on standard set up. My intercooler is looking a bit passed it, would you suggest an ideal replacement to work with the twin inlet manifold please. I can tig weld and am tempted to make one, but it would be much easier to buy it. Also do you need to send your old manifold back exchange, so they can make another ? Oh, and does your Landy also have a name ? Landyloon in Aberdoon 😃
@sisterbrothers1677
@sisterbrothers1677 Год назад
How the hell is that a 2" lift? It looks like 6".
@jonasz3004
@jonasz3004 Год назад
Hi, what is the name of the toilet... Bivi Lou? Bivi what? Thx for help.
@Egirk
@Egirk 3 месяца назад
Bivvy Loo
@dylonthedog1
@dylonthedog1 Год назад
Love these videos. Too few informative videos on tdi tuning. Thanks a mill lads!
@LiamSmith-pj9rr
@LiamSmith-pj9rr Год назад
Any chance of a link to the rtc video had a look and I can’t find it
@STK34761
@STK34761 Год назад
no rust problem ?
@grant209
@grant209 Год назад
First came across one of these Glind Shower Kits back in 2012 doing the Simpson Desert treck in Australia, brilliant piece of kit especially after long days winching and digging yourself out the sand on hot days, or just to have a shower and freshen up after 2 or 3 days free camping. Been keeping my eyes open for a second hand Heat Exchanger kit for a couple years, and two popped up on Facebook Marketplace this week, one a Twine Heat Exchanger the other the full Glind kit same as yours, so hoping to pick-up one this week for half the retail price here in Aust.
@Mark-ks9jj
@Mark-ks9jj 8 месяцев назад
I just scored a full kit in a case for FREE, took a 2.5hr round trip drive up to Sunshine Coast to collect, but was well worth the time to get this amazing piece of kit!
@HobsNobs
@HobsNobs Год назад
You ever going to make your own videos?
@giannispanagiotakopoulos9725
you should put a sticker on the bonnet that says "STRANGE ROVER"😀 awesome work and great craftmanship
@empty1966
@empty1966 Год назад
Hi looking to get an awning do you have any links or contacts on where to buy the armadillo please it looks great
@only-vans
@only-vans Год назад
San Miguel in a can? glass, beer is served in a glass ... usually a bottle, which is made from glass. You'll be drinking that supermarket shite that is sold in 2 litre plastic bottles next. now back to the side story: That is the part missing from my engine, hopefully it will cure the plume of black smoke from low down torque
@only-vans
@only-vans Год назад
say NO to carpet lining. Carpet lining is for VW T4 and T5 owners who do not know any better, or for campervan converters looking for cheap interiors. Vinyl lining in a cab is jet washable, try the same with carpet lining.. Vinyl material is available in many textures and colours .... have a google.
@fythe252
@fythe252 Год назад
Hey, does the spacer serve its purpose? My Fuel Pump is leaking and I am thinking about to fit a spacer in my new one. Greetings from Germany
@bullshitdetective1
@bullshitdetective1 Год назад
LOOK LOOK!!!! BEER!!!!!
@stevemann6110
@stevemann6110 Год назад
This is such a great video of simple yet hugely effective ways to utilise areas of a vehicle for overlanding.
@bullshitdetective1
@bullshitdetective1 Год назад
its monday afternoon and still no beer!!!
@Kris-jk9mq
@Kris-jk9mq Год назад
I dig it man! Built, not bought!
@bullshitdetective1
@bullshitdetective1 Год назад
ok, now lets have the big excuse for no signs of beer?