I post random vids of my turntables and their issues. None of this is really meant to entertain anyone. Sometimes I might throw up a video of me working on a car.
If the CD spins freely by hand and isn't mechanically stuck, the next step is to clean the lens. If that doesn't work replace the C2103 capacitor on the servo board (33µF, replace with a high-quality 47µF), making sure to check the laser current is still correct afterwards, the procedure for which is in the service manual. Suspect more terminal laser failure if it's been shipped without its transport screws set.
Belt replacement is the vid called. I was looking forward to seeing how to replace the belt. Maybe you should do a vid with your camera on a tripod or something, so we can see how to replace the belt 😊
@@PranishBhaskaran I did not make a video, but it's pretty easy to do. If you have the plastic cover over the transformer, remove it. Then gently pull the plastic pulley with the strings out. Keep it tight so that the strings do not unravel, and then you can slip the belt on. I still have the Beogram CD on my table, let me know if you want a vid, I could make one quick.
@@beitie You are amazing! It would be a great help to watch and follow it. I am afraid of the strings. Earlier I had messed up my Beocentre 2500 while trying to replace the belts once.
Returned mine - very poor execution. Very uncomfortable, horrible app, bad connectivity, and limited volume. Many B&O products over the years - this is the first real disappointment.
The speakers use the Bang & Olufsen Powerlink sockets. You will require an 8 pin DIN cable. soundsheavenly.com/powerlink-8-pin-din-connection/20-266-powerlink-mk-3-compatible-8-pin-din-cable-with-4-cores-wired-low-profile-cable.html#/1-length-05m
@@beitie Thanks for the reply! I came across your video because I am getting the same B&O setup and wanted to see how it looked. Now, thanks to your video, I am looking for this album from MARINA!😉
Ha, back in the day I wanted these , got smaller / cheaper Dynaco. Pioneer put 2 or 3 page full color ads in the Stereo magazines at the timeR 700 / R500 / R 300
I'm very confidant that there will be special edition colors coming out as time goes on. That's how B&O work now. This part of the product release was aimed at those who want the engraved edition. I would not be surprised if they did a special edition in that blue they did the Beosound 1 with.
How do the Beoplay H95 Bluetooth over ear headphones sound compared to other Bluetooth headphones in the same price range? Which pair in your opinion do you think 🤔 are the best Bluetooth wireless headphones 🎧 to play Hiphop and Reggae music? I love bass, clarity, and loudness. Little background I have not bought a pair of over ear headphones in almost a decade. I currently own Dre Beats Studios and Marley Deluxe headphones both plug-in headphones. I am looking to upgrade to Bluetooth wireless headphones but want the clearest, loudest, and bassiest headphones on the market regardless of price. I just want the best Bluetooth headphones for these two genres of music in particular. Thanks in advance if you have any suggestions much appreciated!
let me express my frustration here... I bought a new H95. - Beautiful - Sound amazing as expected from B&O -Very very good noise cancelling and transparency modes - Amazing finishing lines and materials BUT: During calls (over the phone or using apps like Skype, Teams, Zoom, etc..) the Noise Cancelling feature is disabled!!! It is just unbelievable. Such a great piece of art with this issue. how can B&O launch it into market with this restriction???? I am so, so frustrated. Waited it for so long and now Just returned the Headphones :-(
Thank you for your video. I really like B&O H6 Headphones and I bought H9i and then returned them because I don't like how they sound in midrange and trebles. Are these H95 really better then H6?
The reviews out there so far suck in terms of giving you useful info. about both the ANC and noise-cancelling and comparisons with xm4s. Waiting for the serious reviews to come out
thats a no :) they do live up to the quality of the competitors right? but bang and olufsen u pay a lot for brand and design and lets be honest :D they look expensive compared to sony bose senheiser etc... i mean most of those look plasticky and cheap.. so from a sound perspective it doesnt justify that huge a price gap so if u only care for sound and not design then sure go ahead and buy the bose or sony instead :)
For me most important question is; is there a EU volume limit on H95 and if so can it be turned off or is that possible find out without non-limit vers. Thanks.
I have not had much experience with the Sony's. Only a little time demo at a Best Buy store. Personally, I feel the Sony's lack high end, to the point where high notes feel as if they are still a mile away. So in my opinion, yes.
Ofcourse They should be better than sonys when we compare the price point. Though is it about the price ? Its Premium than The sonys by miles , Though the Features , Comfort and Sounds , I Feel like Sony still leads as to all the reviewers . All that at Under 2 Times lesser Price at 350USD . But This Time B&O Sure caught Attention with the New design and Price !
Good evening Bietie do they really sound that good because I just purchased the Sennheiser momentum 2 for the gym and the momentum 3 for travel and they totaled $679 and I'm willing to return them back to Amazon and getting these bad boys I had the h9i about 2 years ago and returned them back to best buy because they didn't get loud enough and they had a lot of siblings in the treble!
Thanks for the comment and question. Honestly I've really only listened to Bose and B&O headphones seriously in he last 10 years. I think if you didn't like the H9i's these may not be for you. I do feel that the sound is better with these, and the ANC is better as well. However, the volume is not louder. I hear people complain about the volume issue a lot, and I'm very confused by that. I love loud music, and make the gutters on my roof vibrate with my home system, I find these headphones as well as the H6's, H7's and H9i's to be adequate in volume.
How are surround effects and it's dimensionality. All these things are what I'm interested in. My TV is able to connect a wireless Bluetooth headset and output the sound so I guess unless you have a capable tv you'd have to do this on a laptop with appropriate Dolby or DTS drivers. Thank you in advance if you're able to make this happen
I mostly listen to 2 channel music with my headphones. So these are not for replicating surround sound. However the stereo imaging is very good, so I think you would be very happy with their sound when used with a television.
I would say that these have a warmer tone compared to the H6's, but not like drowned out in bass. I've found so far that I do prefer these. Sadly I'm not the greatest at describing the sound, but if you like the H6's, I feel that you'll enjoy these more.
Thanks for doing this. Great video. The headphones look amazing. I look forward to trying them out. Th EUnboxing experience looks very premium and you did it justice. Did you ever find the engraving of the number? Can you describe the sound - for example, compared to the H6? (which, like you, I love) Whether you did or didn't I now know I want a pair. I have had B&O headphones before and not only are they luxurious - they sound luxurious as well. I have the P6 speakers and they are hands down the best at their range. People have a go at them for the price nit if you take the price away - they are the best in their class by some distance in terms of the sound they provide and especially when they are paired in stereo. Once again thanks for the video and I hope more people do videos in these headphones with the same quality. 🔥🔥
Thanks for the comment. Mine were not engraved. I'm working with B&O on that issue, and I hope to come to a solution eventually. As to the sound, I'm loving these. I do find they pack more punch on the bass compared to the H6's, and I think these H95's might be better. I really love them.
@@beitie Actually i find the engraving slightly distracting...since the limited edition is black you have an extra limited edition Do they work with usb-c(i mean audio over usb-c)?
@@beitie thanks thats good to know. I saw a video where number out of 95 is engraved both on the box near the lock and on the left arm of the headset...
You don't need to grind or file anything. The rod that goes from the middle of your shot to the top right is threaded. Pop it out from the white bush behind the button and wind it in or out to suit the latch, and then it will work properly. Much quicker that grinding or filing.
Maybe so, but all I can say is that my fix has worked for well over 5 years now and I haven't had to go back and fiddle with anything. So... There's that.
My 2006 bmw 330xi trunk has a problem. On the keyset, the trunk open button wont work but when I unlock the doors it opens.. Really strange. And while im driving the trunk always pop and the interior trunk open button doesn't even work. I need you help guy...
