Тёмный
Datfpv
Datfpv
Datfpv
Подписаться
FPV quad reviews, drones, builds, mistakes and successes, if its good its good, if its not its out #killingit #fpvrules
This channel has been made from my love for fpv and flying drones nothing more nothing less.
Just me and Mr Tree doing FPV
5:15
2 года назад
When Dogs Attack Drone Pilot
11:11
2 года назад
Комментарии
@herbalfly3157
@herbalfly3157 4 дня назад
Bonjour Quelle est la manip pour le protocole Bayang ?
@ReelVirtuoso
@ReelVirtuoso 18 дней назад
This radio is dog shit, doesn’t bind to anything else
@whs5517
@whs5517 20 дней назад
Why does the button stay red when I put the throttle down? It never turned blue?
@jamesmason7124
@jamesmason7124 21 день назад
I'm building a Flywoo Explorer LR 4 v2 from the chassis up, what size of gps fits it
@michaelrios1785
@michaelrios1785 22 дня назад
thank you for thiss video, it helped out so much but i am still not able to arm the drone and test out the motors. any idea what it could be that i missed or am doing wrong? thank you for your help.
@connorjones9478
@connorjones9478 24 дня назад
This video could have been 13 seconds long and had 37 less breathing and lip smacking ASMR noises. Thanks for the help.
@michalpesek1397
@michalpesek1397 27 дней назад
Hey there! I need some help with my Tango II settings. When I push the pitch or roll fully on my remote controller, my drone doesn't achieve the full range of motion. It won't do proper dives or flips; instead, it responds slowly and with limited movement. I've followed various setup guides and checked my remote controller settings, but I still can't figure out what's wrong. Interestingly, when I test the controller in Betaflight's Receiver menu, everything appears to be working fine. Any ideas on what might be causing this issue?
@SJIMichaelp
@SJIMichaelp Месяц назад
Thanks for your demo. Appreciate it!
@ukmonk
@ukmonk Месяц назад
thank you! top tip!!
@tommypoteat9433
@tommypoteat9433 Месяц назад
can you show how to bind the light radio 2 to the mobula 6 i cant get mind to bind
@kaygeebee1962
@kaygeebee1962 Месяц назад
Why oh why do ImpulseRC supply the kit with very short stack screws that aren’t long enough for the vast majority of modern stacks. Such a cheap fix.
@kavorka8855
@kavorka8855 Месяц назад
You're one of few on youtube who actually understands the importance of including the audio directly from the camera! Most silly youtubers replace the audio with a background music, leaving everyone wondering about the quality of the audio from the camera. Kudos to you 🙏👍
@kavorka8855
@kavorka8855 Месяц назад
is it safe? I mean without 3d printed cover.
@macofish1
@macofish1 Месяц назад
I click connect and it changes to connecting but stays blue and doesn't connect at all.
@dizhang1944
@dizhang1944 Месяц назад
How much in your company ?
@huzafah_
@huzafah_ Месяц назад
Your music too slow i cant hear it
@rrenegadoo
@rrenegadoo Месяц назад
Excellent video.... I did something wrong and when I couldn't recover the "dump files" from my old computer.... were can I get those files for flywoo explorer HD LR4 version 1 with caddx vista... Thank you.
@gerritjustingrone1370
@gerritjustingrone1370 Месяц назад
echt geile Mann
@THEVOL
@THEVOL Месяц назад
Is there a faster way to set this up with it connected to a computer? I love this radio for a lot of things but the setup is horribly complicated.
@Quad8ightMix
@Quad8ightMix Месяц назад
Sir Need help.. What aug size of cable use in iFlight Xing 1404 5500kv, for new 3inch build, thank you for your future response.
@tomkoller749
@tomkoller749 2 месяца назад
Can you bind any drone this way? Eg; Thinhawk3 plus freestyle?🤔
@weezypeasy
@weezypeasy 2 месяца назад
Game changer! Thanks.
@michalziom29
@michalziom29 2 месяца назад
Hey i know it's an old video but i Hope you can help a newbie out, will this radio work with a "tbs tracer nano rx" receiver? Nothing extra I'd need to buy like a module or something?
@EalgeMountainPhotos
@EalgeMountainPhotos 2 месяца назад
Hello! I just watched your video and i still cant connect my TineyHawk 3 plus. I have tried many times already but it wont bind. Please help! Thank you!
@NiftyNodes
@NiftyNodes 2 месяца назад
Awesome work! I couldn't get this build finished unfortunately. The stack screws that came with mine are far too short and wasn't even able to get even the 4 in 1 esc on. I'd use my own but mine aren't counter sunk like the ones that come with the frame. They are required to be as the arms ride flush underneath them.
@onewayc3487
@onewayc3487 2 месяца назад
How do you get drone footage?? I don’t know how to record or get them to my computer
@aidenkringenart
@aidenkringenart 2 месяца назад
Thank you so much!
@LordOfBanana
@LordOfBanana 2 месяца назад
thank you
@LordOfBanana
@LordOfBanana 2 месяца назад
holy crap this just saved me
@pcxdrone
@pcxdrone 2 месяца назад
Those metal shavings are more dangerous than you may think. They could get inside the cable connection you have sitting next to it. Not good.
@samuelevinti
@samuelevinti 2 месяца назад
why do you run props in? Always thought props out is better for signal interference
@paramedic1988
@paramedic1988 2 месяца назад
So this drohne works on ERLS or on TBS? I need a drohne like baby ape but not with ERLS, u looking for one with tbs crossfire controller
@hillbillyfpv1
@hillbillyfpv1 3 месяца назад
Nice build brother! 🔥💯🔥
@tommypoteat9433
@tommypoteat9433 3 месяца назад
man your the best
@hillbillyfpv1
@hillbillyfpv1 3 месяца назад
Subbed!! Gonna build this, what size lipo are you using?
@trollord2775
@trollord2775 3 месяца назад
Does this work with the normal DJI fpv drone?
@masonlloyd4304
@masonlloyd4304 3 месяца назад
What size from center to center did you order to fit the micro apex stand offs
@christinababcock305
@christinababcock305 3 месяца назад
Thank you. Found this video after 4 hours of research and screwing with the controller
@Aik_10
@Aik_10 3 месяца назад
can you connect it with a phone
@malnasimon7041
@malnasimon7041 3 месяца назад
Have you already flown your clone frame? How does it perform?
@Boostedsn95992
@Boostedsn95992 3 месяца назад
This helps
@BIRDYFPV130
@BIRDYFPV130 3 месяца назад
I bricked mine and am trying to bring it back. Please help me
@BIRDYFPV130
@BIRDYFPV130 3 месяца назад
It only powers up in set up mode
@monacocross4241
@monacocross4241 3 месяца назад
arm in tango controller you make digering , when bution puch inside in tango is - on , you make from off to on = on lol if inside puch bution in tango is on
@harryedwards7168
@harryedwards7168 3 месяца назад
Love it man! Be careful around there though, there can be some dodgy people lurking around there so always keep an eye out. Have u flown in the abandoned stadium nearby??
@BIRDYFPV130
@BIRDYFPV130 3 месяца назад
Mine is stuck in set up mode after firmware update will not power up anymore unless in set up mode
@PhalanxFPV
@PhalanxFPV 4 месяца назад
beginner fpv drone
@626jonny
@626jonny 4 месяца назад
Will this set up work for a hummingbird BNF F4V3 and it uses ELRS. I’m new to this
@Crazymotoman03
@Crazymotoman03 4 месяца назад
Thanks for the video! unforunately something wrong with mine. I don't have a blue light at all on my board. cant seem to get it into binding mode with the button. Using cli says "unsupported when I type the command. Ended up using a separate receiver.
@DronePsyche
@DronePsyche 4 месяца назад
So what's disappointing is that the DVR footage is going to be the same quality as the '04 air unit. In my opinion.its.marginally better than 03 and still not as good as a GoPro....So if that's the case, why not continue using vistas and 03 air units if you're going to end up flying with a GoPro for footage? That DJI sharpness... 🤢. Never goes away
@markus4979
@markus4979 4 месяца назад
@4:33 😯😎 I would sweat with those close passes, being a cm away from sending in the drone, despite care refresh program hehe. No risk no fun lol