Welcome to my channel ! I am always working on some kind of project and I wanted to share them with you to maybe give you some ideas for projects you may have been thinking of doing.I work for Mini Cooper and had started adding some shorts to show you the new models and features on them. Let me know if you would like to see a certain feature on the Minis that you are not familiar with. If you like my videos please like, share and give a thumbs up and don't forget to subscribe to catch all my latest videos! Thanks for watching ! Disclaimer: The projects and repairs I do are for your entertainment and to get some ideas. I don't say that everything I do is done the correct way, just my way. Sometimes I may give you an idea that may save you time or money. If you need professional advice please see a professional : )
Those plastic bowls warp when removed, you should have bought the aluminum carb bowl for replacement. OMC only used plastic bowls on G4’s for 4 years and went back to aluminum in like 1993 or 1994.
@@fredcook1845 I don't currently have it on the tractor but I believe it attached to the attachamatic mount on the front and there is a big bar that goes under the tractor that mounts to the pull lever.
@DJsWorkshop thanks for the reply. It's pretty hot where we are, and the fan would probably run all night. So I was wondering if it can handle running for long hours?
@@golchf1 I have one of these gable fans on my coop that is also attached to a thermostat. It runs from multiple hours at a time out here in Utah. As soon as it hits 82° in the coop, the thermostat kicks on and it runs for about 12 hours without issue!
Hello, thank you for your videos; they are very interesting. I also have a Eurovan, although it is a 2003 model. However, I have a problem: my air conditioner won't start. It might be an issue with the compressor. When I bought this car, the previous owner told me that if the air conditioner stops working, I should touch a wire connecting to the battery's positive terminal, and it should start working. However, recently, it stopped working even when I do this. I would appreciate any advice.
The belly pan does fully detach. Two small nuts at the back to disconnect from two rubber vibration mounts, and then remove the back part from the slots. Thanks for the video..
Thanks for the video. I replaced mine because of it. I had a problem going from front to back. It was easier to meet in the middle because I couldn't secure the last hanger. Is it ok for the donut gasket to be exposed to the weather?
@@alexey1675 and fight the stabilizer links the entire time? I remove the lower stab link nut from swaybar and leave top connected to strut, that's my time saver. You want it to have slop, play and workable movement; leaving the stabilizer links connected to stabilizer bar will restrict this need while working the bushings.
I have a 2022 f3 limited I think I might have a bad oil pump…do you have any recommendations to check to verify the if I am right….. I have checked my oil hot and cold and it reads the same,that was the first thing I was told to do because it won’t shift into gear.
Sorry for the poor audio. This was the first time using the Gopro on the bike and I had it chest mounted. I have since mounted it to the helmet for a better view and I am looking into getting an microphone that I can use inside the helmet. Does anyone have any recommendations?
Depending on what camera you will use you may have to use a microphone adapter. They say the cheaper gamer headset microphones with a 3.5mm plug does a good job for inside the helmet.
I can understand the "saving money" part... but what about the other blend door that's above the hot / cold door that you fixed? I believe it's the one that directs the hot / cold up or down.
Hello I've got 2011 Corolla and when I start it it idles rough and engine light is now on. Seems to just be idleing rough and doesn't sound the greatest when you first start it. Would this cause the check engine light to come on ?
Yes if the engine is not running properly it will definitely set a check engine light. Take it to an Auto Zone. They can scan the code for free for you and give you an idea what might be going on with your car.
I did not have to because there was very little loss of fluid. When you drain the coolant it creates air pockets, then you would need to bleed the system.
IS THERE A SUPPORT BRACKET ON THE END OF THE ROLL BAR ON THE FRONT BELT PULLEY THE BAR IS NUMBER 23 ON PARTS DIAGRAHM ITS PROBALY A SADDLE BLOCK I NEED ONE
I used to fly fish for stripers in Newport, my buddy had family there, we'd make the drive from Buffalo and fish a long weekend in our 20s and 30s. Just awesome. Took the family there in 2017 and fished Sachuest Point and all my old striper holding areas. There was a hurricane way out in the Atlantic so the waves and tide were too high for me even at low tide to get where I needed to be, but being there was like I never left.
I spent the 80s and 90s fishing for stripers around Martha's Vineyard. Caught tons of nice stripers there and even got a few monsters. Some of the best memories of my life.
That makes a really nice planting bed. I use my Troy Bilt Pony after I plough my garden, but its like tilling the surface of the moon. One of these on my Wheel Horse would definitely be easier. That's some beautiful soil.
