It can be difficult to find the right professional-grade binding supplies and equipment needed for your business. Let us make the process easier by being your source for all your bindery supplies!
This depends on your usage. If you use your drill frequently, it is advisable to sharpen your bits often. Check this video out; it details how to do that and what you will need. --> ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-23F2-JnPcFo.html When you notice your bit not gliding through as smoothly, or there is more resistance, it is time to either sharpen or replace.
how do you avoid the chipboard from getting cut into the sheet right underneath? you can see this happening at the 6:25' mark, there's a bunch of chipboard on the top of the next pad where the glue is.
Using a padding knife to separate the stacks is key! www.cfsbinds.com/3-pad-knife-1-ea.html?gad_source=1&gclid=CjwKCAjw2dG1BhB4EiwA998cqOyaC2niWbmP98LWHVnPtG_NT6xmzOSeN_vQrX6PRJ5tpzLOOwSVPBoCtnQQAvD_BwE
@@cfsproducts8436 I didn't expect such a quick reply! Thanks! We used our drill very infrequently until recently, now we have 400,00k sheets to put through it. I have been learning up on maintenance items, bit care, and proper setup to ensure everything works well through this process; but couldn't find anything out there about how often to use the wax sticks while drilling. Some places said literally every drill, some said every month. I just wanna make sure things work will consistently for my operators.
Sergio Vázquez writes to you. We want to ask for your support. We have a Stitchmaster Stapler, we press the pedal and it staples more than once, as if it were stuck, we already checked the scale and the problem is not there, we checked the mechanical system and the microswitch and they work normally, we tried with another pedal and it has the same problem, the stapler works more than once as if it were stuck. What could be the problem? Thank you very much for your comments
I know this is old, but hoping someone can help. Can you tell me what thickness of chipboard works best for notepads? There are thousands of options available online and i recently ordered some that turned out to be flimsy cardboard no thicker than cardstock. Any recommendations would be very much appreciated! Thanks!
Did this camera come with the portrait/person sticker that can be put on the screen? It's for people taking passport photos. Can that sticker be removed??? If so, how?
Great idea! Stay tuned. The open-back posts work the same as the other posts, but the screw will pass beyond the post, as it is open-ended. Thus, the end of the screw will 'hang out' the end a little bit. Hope that helps.
I have a corrugated poster that is a little bowed. Can these picks be used on nails? Do you have another idea how to hang this on a wall when it's bowing out quite a lot from the top? Thanks
Pictures with gray in the picture are not compatible with US passport standards. I am having issues because the Agencies are not accepting the pictures
what would cause folder to jam or only fold 2 pages when using zfold size, it works fine on all other fold sizes? by the way paper size im using is 8 1/2 by 11
I haven’t tried this yet but I have spent over an hour trying to figure out why my paper only went through once and come out blank after trying to adjust the paper, and the settings , I will try this and , I really hope that this will work for me.. to be continued ..
One recommendation. You could actually have that bottom tab much thinner and come to the same point as the ones above it, which would also cost less in manufacturing. End result would be that you have the top edge to lay on the top and the rest of the barbs penetrate the paper which would allow you to push it into the paper at a consistent angle (straight into the paper), separating into stack much easier.
OMG I bought mine off Facebook Marketplace and thought I had a dud. I wasn’t too mad cuz I only paid $20 for it but I was super glad your trick worked! Thanks ❤
@@cfsproducts8436 I did a more aggressive twist to the right, and it worked! It was all a learning curve for me, between that and the binding machine 😄
I have issues with the paper getting wavy. Is it likely an issue of too much compound? I'm using a ChamPadCo press, I'd think there is plenty of pressure.
This machine has already been sold, however, if you search M7-AST a PDF Manual will come up for this sticher. It will let you know all that it can do. This is a sticher. Thanks for the questions! Have a great day.
