I have a double oven with a F2E1 ERROR. Any idea of the root cause? Nick

Then only way we got ours out was to remove the bolt spray some w-40 and turn it on to drain and spin and it loosened up. I thought if this doesn’t work I’m going to have to jump in there and pull it out like there other person did in the comments 🤣

Thank you for this video. It's the exact model I have. New belt replaced in under 30 minutes.

front loaders suck. mold factories

No mention of the fact that 316536621 does not come with holes pre-threaded.

It’s not as easy to do as the video depicts! The two minute video took two hours plus a pry bar!

Great instructional video. Very thorough and did not assume anything that the repair person already knew. I am going to order my pump from you as a way of saying thanks.

Thank you. I was having trouble figuring out how whirlpool wanted me to take the console out.

Thanks for making this video! Although the part is hard to come by, at least I know it is very accessible/swappable.

what is the that little black rod on the timer? that rod chipped off on my timer and now my dryer won't work efficiently. ordered a new timer and just watched this video.

Why doesn’t unplugging the switch shut off the engine? Mine is stuck in the on position but switch clicks doesn’t seem bad.

I cannot get the block on, it doesn't seen to go far enough down to slip the block in as easily as your video shows. Your guy doesn't even have to push on the trunnion. I put on a new seal assembly do you think I have to put it lower?

Thats really cool :)

My keypad is one unit stuck on with a sticky adhesive. No separate keypad boards.

What is the part number.

Half fast repair 😂

This was a great video, but ditched this piece of crap washer. Have grown to absolutely despise front loaders now, especially after this. Pulled the gasket off and everything was full of mildew. The recirculating water line, drum, etc. this is a WASHING machine that uses water. This should not have to be maintained at this level. Not groaning at y’all just this mess they think is innovation. Literally just got back from Lowe’s with an old schools top loader without all the crap in it. Again, video is solid and helped me get this thing ready for haul off.

Thank you so much for this video. I was able to remove the housing cover remove and the lint I couldn’t reach. Total time spent was roughly 30 minutes. Thanks again 👍

Thank you great video it made it easier

very favorite

This video was right on point. Exact instructions. My dryer had 1 more cord that this model did not have but it was a simple step. Wish all instuctions were a clear as these instructions. THANX!!!!!!!!!!!!!!

RepairClinic, my ice maker box leaks water after dispensing into a cup. Do you have a recommendation on smart part to buy (general)?

Excellent video! Thanks so much for posting!

Thank you! Thank you! Thank you!

Working for HVAC company I only had universal motors on the truck. Had to cut wires and motor shaft to fit. No OEM parts. This is a dream to have exact replacements.

Excellent

This is an excellent tutorial! Thank you.

THANK YOU

But where do you buy the new seal?

Thank you!

Hi. I just have a hopefully simple question regarding whirlpool over/under. The ice maker is on the top left of freezer. What is the 2nd (middle) position for the ice maker arm? I think our maker is going by itself to the 2nd position, but not going all the way down to make ice. I just witnessed it moving from the top position, to the 2nd position, to the down position by itself (so maybe it's possessed.)

My 20+ year-old glass top was getting pretty scungy with all the spilled food and liquid that couldn't be removed even with heavy-duty cleaner and a razor blade. I ordered a replacement from Whirlpool; it was an old model top, and they needed to go into the far corners of the warehouse, so I placed my order on June 15, and received it via FedEx on July 3. The total cost was $370: $345 for the glass top, $7.00 FedEx Ground, and $18 sales tax. I followed the directions in this video and got it installed within a half-hour. Some things to think about: have a second person, with a flashlight, there to help out, because once you have the new top seated you have to re-insert the tiny little screws at the front edge of the top, and you'll need to jiggle the top until the holes align and you can insert the screws. Was it all worth it ? Depends; appliance stores are advertising a new Whirlpool 30-inch, 4 burner electric range for ~ $600. Add in delivery, and taking away your old range (unless you want to truck it to the landfill yourself) and you're looking at close to $700. In my calculations, replacing the glass top was worth it.

Thank you for the helpful video. Was able to fix the issue myself.

Shouldn't you discharge the capacitor it with it disconnected from the circuit?

I had a hard time getting the rotor back onto the stator (splined spindle), after replacing the bearings. Any ideas?

Stackable dryer Kenmore

Thank you sooo much! Couldn’t have done it without your video!❤

Was going to do mine, but brake cleaner and a rag are cheaper.

Fixed my stackable ge today great video. My stackable took a lot more work to access the clutch. But the clutch replacement was the same as this video 👍

How did you know that the motor was bad, opposed to the selinoid switch?

Excellent tips, I really do appreciate all the details on how change the evaporator fan thank you very much

What size is the capacitor

Great tutorial. Got me fixed up! 🔧

Thanking God for your putting this video together...very helpful!

Idk this narrators voice just makes me mad... Like it's his fault I had to take this mower apart 😂

I followed these instructions and the new carb leaked gas out the I take like mad. Does this mean that new carb is faulty? Strangely enough when I reinstalled the old carb my mower started running again, so I guess these instructions worked even if the new carb didn’t.

How do you take the push start switch out?

I followed the step by step guide and now the back of the drum is banging against the back of the washer and I don’t know what I did wrong when of the spin cycle…any pointers?

I followed the step by step guide and now the back of the drum is banging against the back of the washer and I don’t know what I did wrong when of the spin cycle…any pointers?

Supertek (Walmart brand) model ST-3614. On the shelf at $4. (Same dimensions as 52-050-02) Peer inside the hole for a comparison: Same metal grid pattern holding back same paper media.