We'll help take you from Zero to HERO, with everything you want to know about your new stuff, from drones to all the tech and gadgets you may have laying around at home or in your garage. Learn how to build an FPV drone, with our pavo pico for beginners series, customize your RC Car to go dangerously faster, or simple hacks for your computer so that things run a bit smoother and more dynamic in Final Cut Pro X.
Brush up on your soldering skills so you can level up and build your very own transistor radio, air powered car, or retro video game.
Learn the basics to 3d printing, so you can master your first prints with customized parts. Learn how to fix the Nintendo Switch or something else in your home that requires parts that are no longer made. Learn how to fly a DJI drone in restricted airspace, or simply the basics to your new stuff and more!
How to by Lou! He'll get you up and running in no time.
Welcome Back to Everything That Glitches! how_to_by_louis@protonmail.com
@@kirkyoung6962 it’s the same concept even if it’s one video You can do one clap, 2 claps, 3 claps or 4 How ever many claps that’s right for you Had more than one video to work work with so it was multiple claps.. Just record 1 video, Press record on the mic and camera wait 5 seconds Clap 3 times At the end of recording wait 5 seconds and clap again .. Video should match with claps from beginning to end in timeline of software If not then it means your aspect ratio is off… Hope this helps Let us know how it goes ..
@@hu55a1nm download DJI assistant for consumer drones flash the firmware again from your computer. Hope this helps.. let us know how it goes…. www.dji.com/mobile/downloads/softwares/dji-assistant-2-consumer-drones-series
Never gave final cut enough of a chance because I only did trial and didn't have enough video to edit. Also looking more to using Davinci Resolve since you can do most things with the free version. i do like the speed of render times in final cut, but the file sizes are crazy big
@@aphixe totally agree with ya on that one… never knew that with Davinci though With Wondershare there isn’t any render time Everything happens in real time.. Will try Davinci, especially since with every new update Final Cut is getting slower and slower unless you upgrade your machine..
I only have the new RC3. I have the motion controller and as you I love it but I want to try manual mode with RC3. Any ideas how I can connect to a simulator?
@@Glenn-Reviews try updating the controller connected to the computer using this app www.dji.com/mobile/downloads/softwares/dji-assistant-2-consumer-drones-series Then download liftoff
@@Glenn-Reviews then try this Links are in the description of video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bBc2mYnnnXU.htmlsi=KVNw0Mvl1qIeXiwt
Have to use a high speed data cable.. That should do the trick.. Or right click on the app/show package contents/click onContents/MacOS/ClickAssistant Hope this helps.. Let us know how it goes..
We have chatted before and still the same problem . Briefly I have had my Avata 2 for 2 months and live near an airport so cannot fly for more than 90 seconds. So I have applied to unlock my drone and been successful. I do exactly the same for my M4P which works but has a different way of adding the drone !! I have watched yours and other YT vids and still cannot get it to work. I go through the whole unlock process on the Avata 2 and is says it's added and I get the 2 option boxes I must tick. After that, you clicked the refresh and a map of your zone popped up. Mine nothing happens. FYI I chose "Zone Unlocking " as it the "outside zone" of my local airport. You use "Custom Unlocking " As I said i have no problem adding to my M4P so it not the application process. It is getting it onto the Avata 2 I have sent this message to DJI Forum to hear what they suggest .😂
Thanks Glenn, Was actually using the RC 2, Really love the motion controller This video show you how to bind it to the AVATA 2. Hope this helps ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fIjpgOrHy9Y.html
Probably if you mounted a camera on it that had streaming capability but you would have to stay close so the connection would not drop and footage would not be choppy. Or maybe if it were a drone that was configured in betaflight and then you can turn off all the OSD data,,,,
17:40 You are basically syncing the video of the drone footage to the footage of the camera. Avata 2 does not have a mic; so you must press record on your camera 1st , then press record on your drone.. Wait 5 seconds and then clap.. When you bring the video into your editing program then you match you clapping recording with sound to the you clapping recording with no sound. Hope this helps.. Let us know how it goes.
Hi, how are you? I wanted to ask you a question. I have a DJI Avata 2, and I’m filming with this configuration: • Stabilization deactivated (RockSteady and HorizonSteady turned off) • Wide Angle Other than that, I always film in Normal or Sport Mode. Brightness, ISO, and all those characteristics I leave on automatic. But when I import the video into Gyroflow, it always tells me that it can’t find the “Lens Profile.” (This happens to me both in the app and on the MacBook. I have already updated the Gyroflow app on both, but it still does the same thing. What can I do?)
Great question.. I actually let the drone do everything for me so when it comes to editing all that has to be done is the splicing of the video, Captain drone or Kendobo might have an answer to that.. But the latest apple updated has made a lot of features crash when it comes to video editing software...
Sounds like you need to level your board... Try this video.. Also are you using Cura, also check the hot end to make sure it's not clogged. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oUUFjssJwIM.html
@@How-to-by-Lou Thanks man for Replying!! I am from India and wanna gift these guards to a friend in the UK, the total was €53.92 at the checkout page, did they collect any other taxes or extra money at the time of delivery?
@@vetrivelvenkatesan3679 if you order them from the website all that will be calculated at checkout If you go to the post office the rates are given on the spot.. however it all depends on your shipping method..
The next give away is in the next raffle for these light.. Every comment in this video is entered. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HCVWRkQdO14.html
@@MarkMorgan-i2y next to the headphone jack there is a rest button. Take a pin and hold that button down until it reboots Hope this helps … let us know how it goes
For the led strip power cables, all i did was dremel a little notch and the frame for the solder points and wires to go through so now everything fits flush
Is this setup with the DJI Controller 2? I’ve spent the last 3 days trying to set my Pavo25 V2 up with the controller 2 and they refuse to work together. I’m just about to give up on it all if I can’t fix it soon.
Try the troubleshooting video. Am using the sam remote as you .. Hopefully it's not your pins.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LEw5Gha1eRo.html
@@lorettanaylor9539 any computer will do Mac or PC - you just need to do all your splicing from Cura and print from the camera fro your computer or phone ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1YlumdhdCd4.htmlsi=L-2iJfww7eBHkIUz
Make sure to usbc data cable.. Oh, and the ding.. you have to hear a ding on the phone.. It's a tad glitchy that way.. Plug the cord in and out until it connects.. If that doesn't work you may need to put in a support ticket with DJI
35 miles an hour with the motion controller and faster 💨 in Manual Mode Manual Mode is experienced with the RC 2 or 3 Will do another video in Manual mode with RC 2
@@MarkBowenPiano will do one like this but with the Avata 2 in both modes Will probably be 2 videos Thanks for the comment.. great idea for new videos ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PVPN2OaIY4U.htmlsi=IxOW4DN8r_xgNFtE
Hi. On the Motion Controller 3 you can use the baby stick and use that to rise and fall without holding the small stick hard up and this can let you look 👀 down as you rise or up as you fall. The baby stick also does a nice angle left or right. The Motion Controller 3 is a nice controller. I don’t use the flips option and so when Easy Acro is off by default you can still use the baby stick to do your rise and fall and your bank left or right. Pretty sweet. Thank you very Much! 🤓🥳
You choose which ever channel works well without glitching.. For me it's channel 3, but that's where I am.. Sometime when you go somewhere else channel 3 might not be the best channel.. It could be channel 1. If things don't go as planned just put it in auto.. Hope this helps.. Let us know how it goes..
A good way to get your exact location to unlock is by putting the longitude and latitude information in the search 🔍 area. Great explanation and video by the way 👍
Thanks for posting this. We created our channel for fun and to share some value and joy with others! We are trending to 2k and I think that is how your video popped up for us. Congrats and great information for all those growing their channels as well! All our best! 😊
