@colindoingstuff3047 - My AC blows ice cold when driving but at idle it blows hot. When I search online it says it could be the compressor valve, did you have the same issue ?
1. Get the refrigerant out. 2. To get the ring, put on leg of the plier in one hole and the other leg holding the frame to move the ring holes to the open side, then you can remove the ring. Never finish the ring hole on the open space if you do that y will push the valve eye, wrong ring position will push out the valve. Ring holes should be behing the canal tracks , never in the open side
I did this today on my mother's 18,1 non-Retina. What a pain. I've been working on computers professionally since 1999 and this was - by far - the worst experience I've ever had. In the end, everything worked fine - though I could not fit the small screw into the hard-drive bracket. The other three screws fit fine, and I replaced the stock hard drive with a SSD so vibration won't be an issue anyway.
Yo the glue is hard to deal with, but other than that I found it pretty easy to mess with...yeah the SSDs speed it up a bunch lol it'll last for another 10 years tbh lol
It won't harm the atmosphere of its 134a. A new can of only 5 bux. You can get a vacuum that you hook up to a compressor to vacuum lines before filling
Lo tienes que llevar al taller a que drenen el gas por que es ilegal hacerlo uno por su cuenta, ya que lo drenen puedes proceder con todo lo demás sin problema
How do these work? Is it apply 12v to open the flow of gas. Or to limit/close the flow of gas? Is it a completely on or off device or does it meter the amount by varying the voltage?
@@elavancin2913 no worries bro. You can tell if it leaks if you have vacuum machine. If it holds steady PSI for 15 min…that’s what the autoshop guy told me. Welcome!
