Over $600!!! Better options out there

Thank you! The information was exactly what we were seeking.

I have a semi recessed cabiet door. How do I screw the front to the face frame? The door interferes. Also the back of my cabinet is sheetrock so brackets in back don't hold. How do I deal with that?

need a entire bottom rack to be lifted for easy use

My cupboard doesn't have the thick side walls, can I wood glue the 1/2 thick support pieces to the sides of the cabinet?

Where can I find this smoke bomb to test my exhaust fan at home?

Excuse me i want to k ow what screws to use to put this on

Yo fr the screws that attach the dampener are too long and they prevent the mixer arms from opening completely. I had to grind down a couple screws to make this function. I work rev a shelf everyday. This is not an intuitive installation

PISS POUR DESIGN. IDIOTS

Датчики хорошо видят только трехслойную бумагу. С однослойной работает не корректно.

I appreciate this video since it also gives me a blueprint of how I can uninstall this from the previous homeowner.

Nice

How far out can the first baskets pull out?? I have a right hand opening face front cabinet. My stove on the left sticks out roughly 3 inches. Will the 1st baskets clear that 3 inches to be able to pull out the blind corner baskets?

Great narration and videography. Watching this video clinches my decision to buy one.

My pot dividers keep shifting and falling off. How do I prevent that?

Set up in my garage. Sure comes in handy. Works great

With as flimsy as those tracks are, and how much they flex, it seems like you should have the basket in and mark the holes for the rear screws so the tracks are actually straight.

We bought one. Nicely constructed but, if you're handy and you need a pull out pantry, strongly consider building a rolling deck for shelves and tracks to guide it into place. This allows you to pull your pantry all the way to your table, if you want.

Background noise is too loud. Unable to hear the CFM

Can this sink be under mounted to a 30-inch kitchen cabinet?

These are going to be useless for my kitchen's blind corner which has only like a 10" wide opening

This is what I want to build! I can’t believe there aren’t any comments!

Nice concept but ridiculously overpriced. Did a quick online search and found that Lee Valley makes a pull-out corner carousel for $315 (includes free shipping). I'd be more inclined to buy theirs.

$1400? LMAO. This would be overpriced at $500. Good grief. You can buy a damn car for $1400.

My parents had a similar device in the late 60s. I wish I would have kept it when they moved.

Horrible instructions with this product considering the expense!!!

Your recommended 20.5” shelf length: do you mean the front-to-back depth measurement, or side-to-side?

Anda boleh memilih untuk salah satu daripada hadiah di atas

oh she's so beautiful

In a bath you just sitting in me flavored water

what brand is this? Its really hard to find Corner base solutions, I love that the door doesn't need to be 18".. Please southern neighbour who makes this? it doesn't look Hafele, rev-a-shelf or Marathon ... Where do you get these?

Our mixer shelf is great but it's not level when in locking position -- is there an adjustment?

Don't forget to compensate for rubber bumpers on door or drawer surface. The holes have to be adjusted for them compared to the template.

Do you have a video to show how to put together the stand on the right....and how yo put together each half?

Saya tidak percaya ia boleh menjadi sebaik ini

खूप छान

Why a set back of 3/16 ??? What about if it’s mounted with an inset door? Do you still need that set back? Also, the top door connector, if you pull it out enough to reach the top rail of your door, the bottom screw (one of the two screws supposed to tighten the door connector nice and tight in place) in the sliding part don’t catch anything anymore. The sliding arm isn’t long enough. The written instructions are terrible and incomplete. The door, once open, does not go 90 degree to clear access as much as possible.

What if there is a drawer on top, will it work then ?

هل هناك عربي يشاهد تعليقي.

Hi. My cabinet has a double door. I’m thinking I can use flat metal braces on the inside of the doors to attach them together so they function as a single door, then attach the door mount. Does this seem doable?

Can you tell me what size the screws are I lost mine thanks

How does the unit fit so snug inside...it's 14 in but cabinet measures 15...

I Want purchase this

How do you remove the entire shelf when you try to insert a pin and it drops behind the shelf itself?

As Ozzie Coe noted below, the pilot hole for the rear should be 11 3/4 from the front of the cabinet ( or 11 /3/8 from the front pilot hole.

Ninja mondo corner revolving unit

Just bought this for my wife and about to install it.

Awesome

Thanks for your Extra info about this topics

This is really great.