We used to do. Things to transfer pictures that were printed out with a copy mashane on on a T-shirt. And you would have to wait till it was dry and then rub the paper off. Just like the last 2, but we used to make quilts with family pictures. After it dries, you just got it.Wet and rubbed off the paper works great on material
Great ideas. Putting the 2x4 in the back seems like a waste. I would have used a fill piece along each side of that far back cubby so the space would be usable.
Yo le añadiría un tubo central con una capucha como una chimenea, para que entre aire al centro. Quizás así elimine TODO el humo. Muchas gracias por traducir!
Nice Video. And Yes, I came here to see how to replace the old line set with the DYI line set. Just Iffy about this step rest is doable. I have little idea now about the challenges that I will go through.
6:50 not something from my workshop but my dads: having one of the sides towards either the garage door or an outside facing door makes it so you can cut some real long stuff. so he has about 2m (yes metric deal with it) of surface to both sides and then some more as he can just open the door and place a table or something else to prop up the piece on the correct hight.
10 Jesus answered and said to him, “Are you the teacher of Israel, and do not know these things? 11 Most assuredly, I say to you, We speak what We know and testify what We have seen, and you do not receive Our witness. 12 If I have told you earthly things and you do not believe, how will you believe if I tell you heavenly things? 13 No one has ascended to heaven but He who came down from heaven, that is, the Son of Man who is in heaven. 14 And as Moses lifted up the serpent in the wilderness, even so must the Son of Man be lifted up, 15 that whoever believes in Him should not perish but have eternal life. 16 For God so loved the world that He gave His only begotten Son, that whoever believes in Him should not perish but have everlasting life. 17 For God did not send His Son into the world to condemn the world, but that the world through Him might be saved.18 “He who believes in Him is not condemned; but he who does not believe is condemned already, because he has not believed in the name of the only begotten Son of God (YHVH, El Shaddai, Adonai, God of Jacob, Isaac, and Abraham). John 3:10-18
10 Jesus answered and said to him, “Are you the teacher of Israel, and do not know these things? 11 Most assuredly, I say to you, We speak what We know and testify what We have seen, and you do not receive Our witness. 12 If I have told you earthly things and you do not believe, how will you believe if I tell you heavenly things? 13 No one has ascended to heaven but He who came down from heaven, that is, the Son of Man who is in heaven. 14 And as Moses lifted up the serpent in the wilderness, even so must the Son of Man be lifted up, 15 that whoever believes in Him should not perish but have eternal life. 16 For God so loved the world that He gave His only begotten Son, that whoever believes in Him should not perish but have everlasting life. 17 For God did not send His Son into the world to condemn the world, but that the world through Him might be saved.18 “He who believes in Him is not condemned; but he who does not believe is condemned already, because he has not believed in the name of the only begotten Son of God (YHVH, El Shaddai, Adonai, God of Jacob, Isaac, and Abraham). John 3:10-18
The reason the MDF snapped was because the space between the supports in the second test was wider apart which made the middle weaker. Its the same idea that if you take a 2 ft 4x4 and support it at 45 degrees and do the same with a 4 ft piece you would be able to drive a vehicle up the 2 ft but it would snap the 4 ft.
I just power washed and it was exhausting .. now have to decide on a stain color and it’s so hard . I dont know about semi transparent since the original wood is not all that great? Wow the sprayer is great to save you pain of brushing each spindle
When you put the tapered spacers just use hot glue to hold them to the wall then knock them off with a hammer when you are done. Make sure to keep them below the top of the base so the damage from the hot glue will normally show.
I have great success with the yellow 20lb anchors. They’re my go to for anything that isn’t picture frames. They leave small holes compared to most others and they hold firm if installed correctly (pre drill hole, don’t over tighten the screw). For picture frames I use finishing nails at an angle. My wife often just uses thumbtacks and they work great for small pictures. People way over think hanging things.
Did you need to get a building concent? Is that a big deal? Great video. I've bult chicken coops and stuff but this would be a worthwihile project and badly needed here.
Thanks for the help we just finished ours at home.. little bigger insert for fire pit but thanks for all the tips.. wished I could send you pic but oh well.. ✌🏼
Nice DIY video of how to install. I just ordered a MRCOOL for my garage from Costco and I heard adding an HVAC surge protector at the disconnect may be a good idea to protect the condensing unit. I chose MRCOOL because I get the warranty as a DIYer.