Good video Calvin. You should have pulled and cleaned sock screen bottom of tank while you had it exposed per manual. There was nothing funny about socket slip off that’s how you can hurt yourself easily and learn to lessen that chance next time you change. Good job
Your capacitor is too big, try 470 picofarad instead. You can use some form of a switch to discharge the capacitor into a load (12v dc battery as an example), John Bedini used a SCR with a neon bulb (60-90v) between the gate and the anode. The anode is connected to the high potential of the capacitor (+) and the cathode is connected to the positive of the 12v battery. The negative side of the battery is connected to ground/negative side of capacitor. Good luck.
You were turning the correct way, so what happened? Simple slip off the nut? I have a toy compared with yours -- TB016 with just 25l /6 gal. Removed 14mm drain plug according to useless diagram.. empty. Checked tank: oil is 8"/200mm deep. ??? Trying to drain tank cos impossible to refit return line (10mm stiff plastic) to drive motor with oil sloshing around.
I had mine run and stall like that as well. Fuel shut off solenoid was shutting the engine down for low coolant. I noticed your coolant reservoir was low. Make sure your radiator is full up to the cap and add to your overflow reservoir as well. Hope that fixes it!
You need a feed hopper to load up with material so it feeds constantly. It will also keep material from jumping up out of there if it has weight pushing down on it while it's being crushed. Also, I would fab up some guards to cover the belt, pulleys and flywheel before someone loses an appendage.
Cut solar nod on pump and put it to battery and it won't stop temprimetol machines thay are I had a problem and keep stopping I fand the problem on the computer 2 connection corroded
@@roybollinger4936 Bullets...If You Cover the Blasting Spot with A tarp & Plywood the Bullet dosen't Go Anywhere as the Cartridge Explodes like a Brass Firecracker would.
You forgot to talk about how important it is to remove the rock dust at the bottom of the hole...... You have the air bulb, but didn't mention it........
