hi rebel. If I understood correctly the 11 joule version does not have the valve block i.e. the horseshoe in the barrel. So you just need to remove the restrictor. Right?
You will have to remove the barrel that comes with the X-tender if you want to use the HD-24 sniperbarrel. The inside diameter of the X-tender barrel is 15mm and the sniper barrel is 19mm, so it wont fit.
@@runerebel8441 thanks for reply. im familiar with removing the X-Tender barrel. theoretically the HD24 barrel will fit afterwards? or is epoxy gluing a 1/2 copper barrel more efficient?
Ciao rune grande video come sempre 😊😊... Io nl mio HDR 50 11 joule ho messo più spesso silicone liquido oil x softair gun ed ora va molto meglio cm.mi avevi consigliato tu tempo fa'... Grazie grande rune😊
This is one of the greatest things about airguns/bb guns. You can literally enjoy and shoot automatic weapon replicas inside your own home or in the backyard, depending on the area you live. Or, in your case, your balcony. Love it!
The only "ism" we all care about is airgunism, my friend. Besides, there's nothing wrong with acting out history. The funny thing was. I was waiting for you to pull out a German helmet or something to wear. Lol! Excellent video. Keep them coming.
I am beginning to lose my patience with these airguns. After what I told you about overheating the airgun, I put it back together again, gave it more silicone oil, and it worked just fine. I tested it again and it worked just fine. (well, not as good as my 27.5 joule peak, but functionally fine.) So I decided to overheat it again, to 100F like before, but this time, before puncturing the CO2. So I get it good and hot, to about 100F or less, then I puncture the CO2, and my oring fails completely, launching out of the launcher. I bought a black, 90 duro oring like they suggested, and this is what I get for it. Why can't I just make a less-lethal firearm, firearms are way more reliable than airguns.
Yes. The markers can be a pain. If it fails when you need them then you are in big trouble. All of my markers has stock heat core O-rings. I got a few new 90 buna (or whatever they call them) from a friend. But so far I still have the stock O-rings installed. They have popped out a few times, but that was because of over pressure and using a thight fitting ball. A less lethal firearm sounds good, but it would require a permit from the cops here, and they dont give that to other than government people. Iam just glad we can buy the markers without permits. In some countrys even these are banned....
@@runerebel8441 It could be the grease. I've been researching grease, not sure what to buy, then I realized something... the CO2 gets very cold, someone told me less than -50F... but most of the greases I see, including Super Lube, are only for -40F. I am looking into some Dow Corning low temperature grease, -100F is what it says and I think the grease should be -100F. The grease might be causing the orings to pop out, I would try a sticky grease that might give less joules, in order to increase reliability, 19 joules is better than 0 joules. In the video you do not switch to 90 buna rings or do you? I will have to watch this video again. Definitely am gonna look into installing a pressure meter, to see what pressure the 100F is doing.
@@earthenscience I still have the stock O-rings in all my markers. But I use siliconegrease/divers grease wich is very sticky. It seems to do the job. Good luck.
I'd love to have the full auto version, but sadly, the UK is a nanny state governed by morons who believe a full auto airsoft gun as a threat. Cool idea wearing the hat, my friend. 😂
Recently sold my 1941 manufactured MP40, it was deactivated to the ‘Old’ U.K. Spec in 1990. This meant the gun could be cocked and dry fired. The magazine could also be removed as well. It was a difficult decision to make to sell the MP, but I’m now a pensioner and the money will come in very handy for the gas and electric bills. I do have a Umarex replica like yours, but it’s just not the same has having an original WW2 MP. Like the German cap, very smart.
Thank you my friend. I used to collect all sorts of guns. At the most I had 3 different orginal MP40s plus one MP38. All deactivated. Different collored bakelite. Ranging from light brown to almost black. Sold them in the 1990s because I needed money. I only have this Umarex and a Denix now. Looks nice and legal to own. The deactivated guns needs a license these days. Greetings from Norway😃
I need to see a detailed in depth video on how to turn it from semi to full auto. The other video doesnt go into enough detail. Like how you open it up etc
It can be a bit fiddly to open it and assemble it, but its not to difficult. I recommend you watch the german video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-knRhMLp4He8.html
That was intresting to see your Co2 cartridge got stuck. I recently modified my 7.5j and had the same issue and wondered if i messed something up. Great vid as always 😃👍
Thank you my friend. It happends almost every time when I use my markers. I can just wait a few minutes and the CO2 cartrige will slide out by itself, or I will use a pair of plyers and pul it out. Nothing wrong. Its just the cooldown effect from the CO2.
Yes it only makes small holes where the BBs enter the board, but it blast out the back. It spits out the BBs at ca 430 fps or so and at around 1100 RPM. Very fun to shoot with 😁
Sto fucile e' spettacolare,ogni volta che ci fai un video,mi piace sempre più....adesso sono indeciso se acquistare questo o il softair della beretta fucile d'assalto che con un caricatore in più costa 400€ di più dell' m40..... Pero m40 e' una depotenziata e se lavora bene come quello tuo sarei più contento in quanto e' stato sempre un sogno...Gia ho la luger in 4,5 mm manca m40🎉🎉🎉
I am beginning to understand the HDR50 a lot better these days. It is most consistent using co2 with lighter rounds as you have shown time and time again. Heavy round may turns out higher energy but the average turns out lower. Hpa is a different animal but many people only use co2. Nice job as always.
Thank you Sean🙏. I have tried HPA in all my HDR50 revolvers (I have 3 of them) but they dont like to be used without the restrictor, just dumping all the air or CO2. Not sure why it does so since all the other markers works great without it. Very strange indeed🤔. Cheers my friend 😃
Runeski how are you and happy belated birthday! I am waiting to get my hands on a gen2 HDP50 so i can do something special. I found a use for the HDP50 compact finally 😂 ...i stole the magazine spring from it and stacked it in my HDP50. Not ideal but it is just enough to allow a full magazine of balls. Great video by the way!
11 power shots between 29.4 joules down to 18 joules is a great result. It's a lot of power considering how easy it is to tune. Great video my friend 👍🏻
Rune i got some very important Illuminati type info to share with you , i will send you this at our other form of communication , things are getting bad my friend , keep all your markers ready , stock up on a few more boxes os 12 gram co2 also , maybe some more .70 cal balls in aluminum and steel , amazon has some good prices . anyhoo , great show as always my super cool brother , watch and be ready !!!
The HDR50 dont like to be used without a restrictor in the CO2 tube. Just removing the valveblock and not using a restrictor will most likely make the revolver fart and dump out all the CO2 in just one or two shots. I have 3 HDR50 and it happends to all 3 of them...
I definitely agree with you Rune regarding the spring, it needs that extra push sometimes to get it in the chamber ,ive also just put some talcum powder to stop the balls from sticking, I've not put my detent in yet i will wait till it needs replacing, good video Rune, i didn't know home defence made them. My PVC one's work but it's all the drilling to get it just right 👍🏴🇸🇯😀
Thanks Craig. Florian sendt me some after I got yours. Seems to work well. No need to change it until the stock detent breakes. One day I will try the PVC detent you sendt me. I have one more HDP50 that will need a new detent when the stock detent gets ruined. Cheers my friend 😃
I've got the turning barrel for the HDR50 but not fitted it yet, I just done the HDP50 first, I seem to be doing my pellet pistols at this time, very good power Rune, 🇳🇴🏴😀ps will see if you can get some motor bike jeans.
@@Craig59J Thanks Craig. Yes it has good power now. Good luck with the powertuning my friend. Iam just using whatever old clothes thats no longer in use. The jeans is a good ball stopper 😃👍