how's your children's doing??

you didn't show the main part - how you then put back the cover since LEDs have an additional block that you cannot most likely fit into compartment.

I had issues with this until. I bought a phone car charger because the USB did not give the power needed. Just make sure you get a bidirectional micro HDMI cord, and I have an iluv adapter for the HDMI USB and USB type c cords.

does it work with nissan almera? can you make a video of this

Hey brother do u know how to do the plit screen.

Have an xtool to program vin and keys....says program successful...then go to live data and keys programmed: 0 Tried skim delete computer....3 cranks 2 secs run time them dies now no crank any help? Thanx

What's that adapter called

Excellent video! Very helpful. I just wonder why no one shows the ground wire, doesn’t it come back through same grommet and get to chassis? Or a closer site? Anyway appreciate your hard work here, best

Do you have to do that every time u want to watch a video while driving

Can also be used for a ps5

The key needs to be program

Just one question. you did the download first and then the stuff with the screen right???

Did your gauges ever work on the heading for rpm and fuel etc..?

Which head unit you have I have the DMH-WT3800NEX

What year is this Highlander?

I bypassed the brake....added toggle switch

It seems to me he has some vehicle data link behind that radio.. some interface because the oem settings is highlighted in his settings. Meaning if you don’t have a data bus and wire harness connected this might not work…

It seems to me he has some vehicle data link behind that radio.. some interface because the oem settings is highlighted in his settings. Meaning if you don’t have a data bus and wire harness connected this might not work…

good but you took a hard plastic grommet for your rubber cap it's good if it would have been in a VIBRATION-FREE environment in a vehicle you have to consider the vibration so take a soft grommet to avoid premature wear of the cable.

What year tuscon

I can’t find the plastic rings you used in this video. Can you maybe give me the link?

Is kenwood brand any better?

I know this video is 3 years old but it still works. Did you try using the fire stick remote to change the volume? I can't get my volume up/down buttons to work on the remote. The Home button works on the remote and I can use it to return to the fire stick home screen. The steering wheel control still works to change the volume, however. Any ideas?

Thanks man I can’t bealive it actually worked! I have a usb with music videos and I have a by pass switch and it wasn’t letting me watch videos while driving. Now I can 👍

Remove the cover of the fusebox for extra access space

I have the wtnex3800 any clue on how to bypass that?

I just want simple. I want music pumping out of my system. That’s all I want no back up camera no fire TV Internet. Yes RU-vid yes that’s what I’m saying. Simple.

Check the number 10 fuse in the driver's side fuse box, mine was blown out.

I wonder if the Kenwood DMX1057xr has this software bypass option 🤔?.

Damn man! I was about to buy this and the fucking lag killed it for me. These fucking manufacturers are so cheap and stupid. They let their own programmers do their own testing so it's not tested properly. Then they use cheap ass chips.😒

I’ve used this video more than once to help me in my setups. I can’t thank you enough. 🙏🏼

Thanks

Next time get u a headlight too put on your head it's a life-saver 😊

Hi! Could you help me to find the correct H7 adapter for my elantra 2018 ! I dont know what should i buy on amazon

does this work with the wt3800nex?? no hdmi smh

This really works!!! Thanks man!!! I installed my deck with a bypass and it didnt work when going a certain speed. Then i did your method... all good to go!!!

THANK yOU , for taking the time to make video

I did my Acura TLX like that and the voltage from the power cable burnt my A/C blower motor 3 times & I had the power wire wrapped

Thank you my Brother for this video please if you have a video on the change of switch of the fog lamps of the tucson 2013

which model number works for the fog lights. is it H7 ?

thanks for the tips man

I appreciate your video. However, I can't seem to get the clips off. They pop up easily enough. But, they won't come out. It feels as if I'm about to break them when I apply force. Is there something that I am missing? Is the clip embedded into the center or something?

wouldn't the glue melt with the HEAT

But wouldn't the glue melt with the eat and cause MORE problems? I do not think this is a good idea.

Is there a way to aim the Foglights up or down?

Great tips. I have a tucson 2016 and from the Philippines. Will try to do that as well. But have u tried replacing the brake and turn lights to led without causing errors? My front and rear turn sockets are 1156 bau15s and my brake sockets are 1157. Ty for the input.

Is this the same as the 2014 model? And may I know what type of light you used as a replacement? Thank you!

What kind of car is that? The interior is beautiful.

I'm assuming you're allowed to fit them in the USA as they introduced new legislation here in the UK last January which meant retro fit LED or HID is illegal. It stinks because my 2019 Tucson Premium has H7 Halogen which are almost dangerous on dark country roads

Will the head unit work with Roku TV?