I am NEVER going to buy another Honda again 100% because their engineering managers placed the oil filter in the WORST possible location for DIY oil changers like me. It ALWAYS makes a total mess of the chassis, drain pan, and driveway. Smarten up, HONDA !!!

Had my thermostat replaced today. Part was 25 dollars. Labor was 600 dollars.

But that's not the same light he's making go on and off at the end..😂

can this cause a missfire if the clips broke and plastic broke inside? my camry has 2 broken and its the 2 that are saying theres a missfire so im replacing the two connectors today hoping it fixes the missfire

great video. would you still assume this to be the issue if it works at times?

This was the video wad the best I could find and for anyone with a 2014 Nissan Rogue Select, this is the process to get to the blower motor. I know other newer models you can get to the REAR of the motor from the passenger side, which is the easiest way to access it compared to having to drop the whole brake and accelerator assembly. Thanks so much for the video!

..what if that inner part where you put the vice locks on it is severely stripped???

What’s the tool you used for the rotor screw?

That was a big help! Thanks!

Just changed my daughter’s highlander headlights with the help of your video, thanks for the instructions

I have this problem but my fan is blowing at idle. Could I just be low on freon?

Did you end up having to replace the motor to get it to work again?

Thanks 😊

Great detailed video. Good you showed that even though you thought it was the tie rod intially it was the lower ball joint.

Very detailed. Very good

Im doing this tomorrow, this video gave me a clear view of what i will be getting into. The fact you didnt say oh this is hard one handed makes me love this even more!! Great video, thank you!!

Thanks for your video, I've been watching videos and is not so hard to do it, but all the videos shows on car elevator which make easier the work. I don't have one, just my jack and 2 jack stands just like you! greatings from Honduras!

Great

I changed the handle on my sonota and the button still doesn’t unlock my door. Please help

Boss man, I don't have a connector for the plug opposite the control valve connector. I'm curious to know how it got power the last 7 years. Ac just took a shit. Could that plug be useless. Looked everywhere under the car. Only have the control valve connector. Great video, btw. It's hot asf in Miami. Any help is appreciated.

Solid 👍

OMG, i rarely put reviews on RU-vid but it is an obligation to put one today. I did the exact same steps and my issue got fixed right away. Thanks so much

The process was explained concisely. Thank you!

Part numbers? Links?

Same as e-350?

Thanks a million!

Thank for the clip. It did not work on my Highlander. Please what do I do again?

you need to wrap those lug nut threads with cloth when you put those pry bars.

This wouldn't cause my floor boards to be wet would it?

Merci beaucoup

Thermostat housing bolt size 10mm same as other one?

was there a retainer at the transmission side ? 03 Forester and I need to see how it goes back together and stays together.... I put mine back together but drove it and heard click, etc, and noticed axle had popped out 3/8 inch at the transmission, WTH. Tired and disappointed at the moment. Maybe there is no retainer ?

Thank you sir. All I really wanted to know is if I'm going to have to pull the dash apart to get the expansion valve. You can make it short with that information

This was just what I needed! Clear explanation, list of needed tools, and some great tips made it clear to me that I can do this job myself. Liked and subscribed, Sir. Keep up the good work!

Thanks for the video 💯

I think if you use rubber type of material like the bike tire inner tube instead of the red rag which slips and spins that would make it not spin when you turn the nut.

Gracias!!

Right on the money 👏👏

So aside from needing the car raise for your own access, does the vehicle really need to be lifted off the front wheels when changing out sway bar bushings? Because if not, I'd like to use ramps. Thoughts?

Thanks, more video's please 🙏

I have a 2012 X Premium Forester - what's the part number on this thing? I'd like to order it ahead of time as mine is rusted like yours! EDIT: Looks like 14050AA992 is the latest for my car. Also, what do you recommend for a procedure for draining/refilling coolant? Is there a special bleed procedure? Thank you!! This is an awesome video!

Thanks for taking the time to make this video.

This is such a helpful video! Do you know if there universal parking brake cables will work with a Nissan Frontier? I know "universal" is in the name but the length seems far too great from the products I'm finding online

Wow, this is exactly what I've been searching for my Hyundai Accent.

I just chwnged the battery in the fob. All it does is blink red. The button on ignition doesnt do anything

Jiffy lube broke my plug. And tried to cover it with glue and I took it to them because I was just feeling lazy to do it that day after a 13 hr shift so I took it to them and this happens. It was time for the next one and it’s when I turned the drain plug it popped right off and seen the glue they used.

their are a lot easier ways!

Hello, how are you? Thank you for your video. Is it normal for there to be water in that hose that connects to the EGR valve? Because as I see when you removed it there is water there. Greetings from Honduras.

Never have to remove a skid plate keep one bolt in and it will swing out of the way for filter access. Choose wisely. 😮😅

Gracias, funcionó, creo que se me activó por que desconecté el air sensor, se me olvido conectarlo cuando encendí el vehiculo