Let's get seriouslicious!!! I like to review Tech. Make DIY and hacks Projects, If I find a new software trick or a cool tech setup, I will be posting it to the channel. I try and review products I use. And find ways to build things in new ways. If it's nerdy or techie I am bringing it to the channel. I don't have a huge budget or staff so you won't see phones getting smashed here. But I try and make my video helpful and easy to follow so that anyone can do the tips and tricks that I come across. As far as reviews go I just give my opinion of the build and usability of the products and if I would buy it again. I really enjoy making the videos and hope that people get something out of them. I am getting the tek out of here. Thanks for watching. Tweet me at twitter.com/Tekolicious23
Hello. Please please for help. I've got 2 alarms and 2 remote controls but both are "decoded?" , can't pair any remote with any alarm. I had paired one remote with both alarms and then when i tried to pair the 2nd remote I must have done something wrong and i decoded the 1st remote ? Now, I remove the batteries from the alarm, put them back, I long press the "BELL" key, I press the "ARM, DISAR" key and I get 3 beeps, NOT 2 that is the succesfull pairing
i have one of these, the G and the - are connected on the board, so makes no difference which goes to the 5v regulator etc...... i am curious how you wired the input, is the input wired directly to you speaker + ?.....i ask because on my powered monitors headphone output i have to turn my monitors up full just to get the leds to light halfway.....hmmmmm cheers .
I got exactly the same printer with the same problem. Seems like these little fans are just like that. I disconnected mine. Silent and nice. Still works.
Omg has the American education system plummeted in America so much that teaching how to turn a screwdriver is required? You also haven’t used a standard screwdriver there as pointed out above. Can you do a video on how to sit on a bike too. I mean there might be people out there that forget put their feet on the floor and fall off. Or maybe a more interesting video like watching rain run down a window?
That is not a standard screw driver! It is a Phillips head screwdriver. Simple as that. If you don't know the difference, stop putting out a "fix it " video. Now go ride your bike.
With seats, for us bigger riders (>180lbs) if we're looking for comfort for our bigger ass 😆we're looking at wider seats >200mm width, preferably with mid cut-out so there's no pressure of the sit bone. I got the Selle Royal Ellipse (relaxed) which is 223mm wide for my ebike.
Video popped up on my RU-vid homepage as I had a convo last night talking about my two printers... I have two B1's. Funny thing, one is "silent". The other, has the "Bin It" sound at the fans. I print side by side, the loud fan takes over the sound of two printers... Will be replacing.
Best to spray this directly into the intake manifold after the throttle body and intercooler, otherwise it could pool in your intercooler and create a super knock issue and pre detonation. And this GDI cleaner doesn’t mix with your oil at all. If it’s mixing with your oil you have an issue with leaky piston rings. Most of the cleaner should burn up in the combustion process. Some will be left on the valves during the hot soak. Most residual cleaner will be burned during the post hot soak drive cycle.
i know this is an older device by now. But I still use it and it works well as you pointed out. One other gripe I have is that the datetime on the mp4 files written to the thumb drive is wrong, it defaults to some date in year 2017 for some reason. do you experience the same wrong date issue? thanks
I just got the version that your wife has. I saw the one with the hole but I thought it might be firmer due to the extra support and firmness needed to accommodate for the hole, and I wanted the most "cloud" feel. ☁😃 Now my wife is eyeing my seat and I may have to buy another one. I'm wondering if I should just get the one with the hole like you got for myself and give her mine. What do you think? Now that you've had it a while do you have any regrets and wish you just got the same one your wife has? Thanks for the review.
After waiting on the phone for an hour, I finally reached a representative. He went through some very simple trouble shooting procedures which of course proved fruitless. He determined that the charger was defective. However, since my purchase was made four years ago, there was nothing he could do. A new charge, he said, would be $80. When I attempted to explain that this was really a poor reflection on the product and repair ($80 for a charging port that doesn't really have much going on with it), the representative hung up on me.
So how would one change the batteries? It looks as if the the case does not open easily. I agree, the instructions are inadequate. Thank you for this coherent video. If you know about the battery is changed, that would be great.
this thing drove me crazy: the usb port is so vulnerable. a little movement at the plug and the hardware is already ejected. how many times i had disassembled the board but didn't dare to touch the tiny port contacts. thank you very much for this!
My 2013 s is having that problem i switch the plugs and coils and did a oil change still stumbling I will try This ! Do you think I should get a second oil change ?
I feel grateful this reconditioning program ru-vid.comUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 was started. I had Three dead batteries scheduled for disposing of. Having said that, I tried out reconditioning them and it took me only an hour to do it! It doesn`t matter what type of battery you want, the process works.
Maybe I'm just blessed, but I had the exact same problem with mine. We bought it years and years ago and it developed a slight leak even though we didn't use it all that much. I set it aside and totally forgot about it. Yesterday my wife wanted a protein smoothie to help her get over her hip replacement and I remembered we had it, but completely forgot it leaked a little. When I went to wash it before using it I discovered the leak wasn't so small anymore. I tried it out with just a bit of water in it and it went crazy with vibration and water spewing everywhere. A total fail though it amused my adult daughter. . So I called BlendTec's customer support today. I explained the situation and provided the unit's serial-number, manufacturing date, (both on the underside label) and the code stamped into the bottom of the jar. The very nice lady told me that it was years out of warranty (manufactured in 4/12), but because it was my first time calling them about this they would ship me a replacement jar for free. . Yay !!!! So if this has happened to you don't assume you have to pay for a new jar. Call BlendTec first and be nice. They might just send you a replacement for free like me. If you get MaryAnn tell her Mr. Ed sent you.
Thank you for upload this video. It helps a lot. I repaired different way. I replaced Micro USB 2.0 connector. I made short video for it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iPpRpCGkoFU.html
