At the beginning of the clip, at minute 00:07, the robot stops apparently without obstacles. This I imagine is due to the fact that it hit something with the front wheels which caused the crash sensor to activate. It's a problem that I often encountered with my "old" L350i Elite as I have a lawn where spontaneous grass grows and sometimes there are very tough weeds. If the robot hits these weeds with its front wheel, it stops and turns back. The problem is that if this event occurs too often, cutting efficiency is lost (less square metres/hour) and areas can be left uncut. I would like to know if this problem is solved with the new 4.36 RTK 4WD models. Thank you
If this is the official Ambrogio app tutorial you should be more thourough or provide several tutorials with more in-depth explanations. For example there is no reference to the MAP feature. I find this to be woefully inadequate. If this is just an amateur helping others, I thank you for your efforts.
Hello, since yesterday my L350i is stuck because he asking a pin code but the factory "0000" or the previous pin code don't work. Any idea to solve this problem? Kind regards.
This app has the reliability and Ux as if my son would have programmed at age of 6. every China kettle has an better app. My areas disappeared no mow until anymore. I just go the zeta fixed after less than 15 days of mowing for an update. The product may be ok but the app makes it my worst purchase in my life. 0 of 10 Forgot to mention GPS etc not showing up
The Ambrogio app was updated yesterday and there is now a way to update the firmware. I did this with my Twenty 29 Elite. Then the app crashed and the alert LED lights up. Now nothing works anymore. Always breaking off. Should I try disconnecting the battery? As an expert on the subject, do you perhaps have a tip for me?
How did You update the firmware? Mine says "Version r58458" and tells me there are updates every time I open the app. But that message leads to either "ok" (and nothing happens, the message just goes away) or "Don't tell me again". But where do I go to update? Its Iphone/IOS. I see the exact same things as You, except for "Software update" and that big blue "update" button.
Where is the setting for the eco mode? I enabled the Eco mode în the Android app but I always get a crash now if I go to Area 1 and I can't disable that. And the Ios app does not have the Eco mode option for an area
It would benefit a lot the client as now I need to wait for the dealer to have time to do the update, getting a notification on my phone that there is an update available is just frustrating
Thanks for the great video. Please fix the following bugs for my 4.0 4WD Elite 1. No GPS reception shown in the app, but on the mower display it is shown 2. mower and transmitter update buttons don't work 3. A lot of texts fields are cut off 4. The battery status shows 0% within cloud connection. I am ready to help, for example with screenshots.
The ZR does not use GPS to navigate the lawn it uses random algorithms.The wire is only used for the robot to return to the charge station ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HEfC4L3Mft8.html
@@yellowjacket588 each area A1 to A8 can be edited the distance will allways be from the charge station. It maybe easier to contact us via email which can be found www.ambrogio.co.uk
Could you guys explain the befit of the zeta r smart base pls. It seems not making anything smart only a plate and a cable for loading or do I miss any functional benefit for the extra 328€ ?? Thank you
I am sharing our new L25 Elite with my father in law. Our gardens are next to each other. Can he also have access to the app with a own account? Or is it only possible with my login data? Thanks BR
Hi. Is it possible to make an area - "no go" area if it has guide wire running through that area? Or the only way to stop robot going to a certain part of the lawn is to physically wall it off?
I set up the net similar to yours but when it returns home to the base station it keeps pushing hard against the station - almost climbing over the top - then backs out and turns around to try again. Any ideas how to correct this?
In my case I don't want to install the guiding wire at all. Would it be possible to just grab the robot by the handle and place it on the charging station when it's battery is empty? Does it work if there is no wire?
Hi. Could you explain in detail how you hooked up the guide wire to the station in such narrow conditions. Manual states you have to take the second end of the guide wire go past the station and hook it up from behind with 1m of the wire at least in the back. How did you do it? Thank you
Hi yes I had to bend the rules a little to fit the little fellows base in that tight spot, but its actually quite flexible, sometimes you need to take the wire out of the centre channel and lay it underneath so you can off set the base plate, then test it serval times to make sure it docks nicely, in this video I show my wiring in more detail ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tTD3KANNRaQ.html
@@johnhall6538 thank you very much. So from what I saw in the video you provided its not necessary to leave 1m of wire behind the station, you made a 90degree angle and hooked it up
hello, I have a techline nextech sx2 and for the moment the techremote application remains blocked during the update, I specify that I am in france. Do you have the same problem at home
