You will mainly find content in English but there will also be content in Romanian or German language as well.
You can buy licenses or download the music I make and use on this channel here for FREE below this description.
If you can, please support this channel by donating to the PayPal link fron the video description, mentioning a nickname. You will be added to the end of every one of my videos as a supporter. If the page gets full, only the highest paying supporters will appear. I will try to make at least three short supporter pages.
@@capitalfagulhaenduro I think you might have to remove it because it makes it bulkier. I am not 100% because I do not have the charging case. I bought just the mic, transmitter.
@@capitalfagulhaenduro it s only a few bucks. I even dropped the mic on some gravel by mistake on my first day using it and luckily I had that case on and nothing happened 😅
this specific wheel no, you have to buy another wheel to fit the 6mk ii: s.click.aliexpress.com/e/_Dc6WtUr the process should be very similar to this one. Just make sure you document your screws so that you can assemble it back :)
Thanks for this! Can you refresh the link for the BTMidiConnector software? The link seems to be expired now (24/06/27) Looks like that's exactly what i'm looking for.
Or something's wrong with the medianopol site. I checked if it was down and it's not. But when i load it, i keep getting a 'connection time out' error.
this is absolute disaster, when you use CAPSLOCK with you pinky finger, other keypress should be made with right hand, and most certainly not with the key that should be pressed with pinky finger (im talking about Q here)
I did not say this is for everybody, if this feels wrong for you then you can adapt the script to your liking or make something that suits you more. I was trying to figure out what you mean and tried this: 1)from a standard resting position: left index finger resting on F and right index finger resting on J 2)tried pressing CAPSLOCK + Q: pressed CAPSLOCK with pinky and Q with ring finger, moving my index finger over from F to E, because I sometimes use Q and E in combination. The movement was minimal compared to moving my right hand from J to where HOME/END keys are on the keyboard, or even worse, if the right hand is on the mouse, from the mouse to the keyboard. The idea is to minimize movement and not intertwine fingers. I am not saying this is the absolute right way to do it but it's rather something I personally enjoy using and has made my computer typing and browsing experience more enjoyable :)
@@filipbudzynski3760 Thank for the suggestion. If you don't mind, please share some relevant resources for getting more insight. I find myself using my laptop a lot without the extra QMK keyboard and the script from this video helps a ton.
good question. Well: 1. osmo action 4 is waterproof only when the extra lens protection cap is off 2. if used in salt water the action 4 camera will degrade quicker, especially the lens can get damaged because it will have 0 extra protection if the lens cap is taken off 3. this case is useful as an extra layer of safety, to protect your lens 4. The waterproofing is only as good as the rubber gasked ensuring it so if the rubber is too old or worn out, the action cam will not be waterproof anymore. So this case might solve this issue
Minunea ploii din filmarea Praznicului Fericitei Prunce Elena, făcătoarea de minuni, la 7 ani de la adormirea ei întru Domnul... La momentul când unul dintre preoți cântă "Odihnește Mântuitorul nostru cu drepții pe roaba ta și o așează în Rai...", și ajunge la cuvintele: "... ȘI O AȘEAZĂ ÎN RAI UNDE CETELE SFINȚILOR, DOAMNE, ȘI DREPȚII CA LUMINĂTORII STRĂLUCESC" (minutul 8:35), începe să cadă ploaia. Anume cameramanul a tot filmat cerul, deoarece asta a și fost indicația mea: să surprindă apariția norului de ploaie în timpul slujbei de pomenire a Elenei. I-am spus mai dinainte că ploaia este un dar la praznicul Elenei, nelipsit. Deși ploua bine, pe toată durata slujbei lumânările din mâinile noastre nu s-au stins ... Ar mai fi și alt lucru minunat de spus legat de faptul că ne-a udat ploaia (cei fără umbrele am fost udați complet, la piele), dar las asta pe seama celor ce au fost de față, ca să o facă ei înșiși în comentarii. Alte detalii în pagina ei, Little Elena
Hey, I am using the comica vimo c3 wireless mic set (2 transmitters and 1 receiver). I got mine from AliExpress. If you find them somewhere else it would be better because of warranty if anything goes wrong. Here are some links: amzn.to/3HE9GLO s.click.aliexpress.com/e/_DeWBSq1
So much cehaper for PeakDesign option...I mean the PD version was costing me as much as the body of the camera. Can you provide the actual AliExpress link please.
s.click.aliexpress.com/e/_DB7tCw3 hey, it s in the video description qs well. I still use this till this day. The black metal color scratched a bit off on the edges
Just picked up this headset with the same exact problem but it’s the crossfade 3. Hope this will help. I’ve seen this one and another older video of the first crossfade headset but it was just still images
Sad to hear that the "military grade" failed you. But I hope this helps a bit, it's a loose wire somewhere. If you don't have a multimeter to test it you can just push the cable in with your finger and the sound should start playing in the broken side. Good luck!
It says about 3 hours but I have not tested this yet on continous illumination. The good part is that if you have a powerbank, you can keep it running.
just bought this. bluetooth is working on mac OS. you need to connect via Audio Midi Setup, then top left, Window > Show Midi Studio. you can connect there via bluetooth.
@Medianopol, thanks for your video! I also tried on Mac (OS) and with the procedure described by @Jenzz23 it works! The only thing is that it doesn't come in the BT settings of the OS and therefore the Midi Suite 1.3.2 application doesn't see it! Maybe the next firmware update, hopefully!