I’m hoping this is what broke on mine. I was on the highway going 70 mph in a car I just bought. Lucky to be alive is all I can say

Just had to do this December 22 2022. A man named Chris also helped me out. I think it was Santa in disguise

Where I am in Ontario, Canada, tie rod ends come in two grades - one is about 9 bucks more expensive than the other. Be glad yours went in a parking lot and not on the freeway!

Just bought one of those what to do what you did

Good job amigo

Consider yourself lucky it broke in the parking lot and not at 30 mph

Jason do you have any specs on this bike. I have the same one but know nothing about it? It’s 196cc? And which torque converter did you end up getting?

sO A cANADIANN 23 IS WHAT?

Smart I have a brand new tie rod sway bar and bushings for both sides and proper tools in my trunk for back up

I bent my ball joint remover trying to get the factory lower ball joint out and still didn't get it any suggestions?

I’d like to know all grease points on a 2003 ram 1500 4x4 5.7 hemi. Be cool if anyone knows. 👍🏼

Great video, informative... But better yet, too the point and direct, appreciate your work.

Sweet

Good video - thanks - what brand was it and what brand can you recommend ?

Its 2020 bet u replacing it again lol

I know this is an old video, but thank you for this video. I've been looking at a good way to add a rear suspension to my baja warrior. The stock suspension aka springs under the seat, all they do is launch your butt into the air on bumps

who else got anxiety when he couldn't find the right wrench? I'm an amateur but usually pretty good about eyeballing and finding the right size pretty quickly. Otherwise great video

My 2001 Lexus es front driver side outer tie rod snapped in half and made my brakes lock up so i just had a friend replace both the outer & inner tie rod and it runs fine no brake locking, but could that small problem really cause my brakes to lock up or maybe something else? Because im worried it might still do it, but so far its running fine.

I did the 2x4 e-track brackets on my camper conversion and too. You literally could just lay 1/2" plywood on top of the 2x4s and your bed will be plenty strong. You didn't really need to frame the platform and attach the plywood to it. My beds have been in place for over a year with zero issues. I did a series of videos during my build. I'll attach the video where I did my beds so you can see what I'm talking about. Cheers. Bunk Beds: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iVQc9dj1L_M.html Here's a video of the finished camper: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eWfgJcYKh-M.html

How did you break it loose? this literally just happened to me😭😂

Very very similar to what I'm going to do this year. What make and model of trailer? I'm looking to stand at just under 6'1" and want a 5x8.

If you wanna modify your bed frame.. you can literally just run the 2x4s across on the e-track brackets and lay a piece of plywood on them. Thats how I did mine and it stays in place with no problem. No need to frame the platform. I did carpet mine and perhaps thats why it doesn't move around. If you want an example.. you can check out my build. There's a bunch of videos on my channel. Nice job on yours. Cheers.

I had to do the same job earlier this week as my ball joint was completely worn out. I wasn't able to press the the ball joint out since I noticed on my 2003 Dodge Ram 1500 there were spot welds on the top. I ended up using a grinder to remove part of the ridge to get the top of the ball joint smooth to make pressing it out easier. It took much less time and installation of the new one was a breeze. I ended up replacing both the upper and lower ball joints which saved me a ton of money. You did a great job replacing yours. =)

Where did you get the windows for your trailer?

Good job, it all takes time.

Love my tractor mounted unit

FYI - that tie rod stud likely failed from fatigue over time. Pause video at 4:49 - 4:50, you can see the propagation lines.

My question is over 5 years late, but was that a Mevotech tie rod that snapped?

Excellent Excellent, great video for first timers, love that you used no power/impact tools, i was gonna buy a used compressor, dont think i need one too. thank you..please keep it up!! best video on this process

What cvt is that?

OMG i want this!!! do you build that ship yourself? i love building stuff in games

Thanks for taking the fall for the rest of us !

You forgot to file down the edges!!

The best video

K.i.s.s. I understand your original design. Might try it

Mine has jst popped out while parking at work today. Good thing the damn thing didn't pop out at road speed. The fault was mine for not changing it earlier even though I knew it popping and clicking for a while. It didn't have that much play, but appearantly it was just enough.

Every time you throw away a piece of stock equipment and replace it with something else, it isn't necessarily an "upgrade". smh

When i seen the thumbnail at first glance i thought the glove on the ground was a persons foot.. 4 toes and no shoes haha.. Good vid!

if you are gonna do all that crap to a stupid mini bike why the hell didn't you just buy one of the many small dirt bikes available??? Seems dumbass to waste time and money building something that is already available and still end up with just a stupid mini bike when you are done....

That''s counting the revolutions? Looks to me more like you're counting how long it takes you to get that thing off.

Nice

I watched this and it helped me immensely, only thing is I have a 2004 2WD vehicle, the front is the same but you can skip the driveshaft part. I bought a ball joint tool kit thinking it will come in handy. The tool needed to remove the old ball joint had to be modded because of the stamped steel spring assembly won't let it fit. Don't be afraid of grabbing the grinder and modify the tool not the spring assembly. If you don't have an impact make sure you have a decent length of pipe, you will need to cheat to get them to pop.

I have an 04 dodge ram 3500 SLT 4X4, my question is, do i have to buy the whole control arm assembly to replace my upper ball joints? Also, where can i buy the parts at?

how many cc is the engine and where is it marked on the engine,...I have one but can't find it

Hey, so I have a cheap Monster Moto 80cc mini bike, is there anywhere I can get some cheap shocks for the front fork? I can't find anything anywhere that could replace the front fork of my mini bike with.

OH MY GOD THE TAILPIPE SOUND HAHAHA

Yay for no longer getting stranded! Lol

Fuckin sick Romp bro! got to find me one....make a rally race episode lmao

Nice setup. The lighting you described sounds like my rig. You see me going up and down the street from time to time. I have been thinking of putting a blower on one of my machines for a while, especially this winter as it's been really heavy.

My 97' Nissan 200SX outer tie rod came out while I was parking. My bro helped me out by installing it back in