Thank you. Your video was the most helpful. I’ve watched numerous videos because Cali Raised does not have instructions on how to wire the ditch lights. I realized when I had already cut and attached the wires to the harness that I should have done it after I fed the wires through the firewall. 🤦🏽♀️ and I found your video after that. Anyways, thank you again!
I’m having the same issue where the gas tank is leaking. And it’s coming out from the seem left side. Is there any possible solution fixing a “crack” on a plastic gas tank? I just don’t wanna spent on fuel cell setup. It is currently my daily.
Do you know where I can get the gas tank of this car? (Not ebay) I have this same model of car and I have problems with the tank, I don't know if you will know about any website in China
I have a 96 and I have a 95 fuel level sender so basically I can make it work and just not use the extra wire and just wire in the 3 wire ? Instead of 4 wire
I would like to do the same swap right now I'm at work so I'm just hearing what you say but can't wait to see what you do also if I can get a list of everything you ordered I would appreciate it
I have same problem with the oem switch but mine is more worse ! I go to home depot to get a pack of #30 O-ring to make more space for the switch doesn’t go to deep in and put a little bit hot glue to make the switch main board doesnt moving up and down and guest what , its really perfect fit and now its become really OEM mean ! Hope my idea will help you guys 😀
How to remove the metal plate or bracket inside the tank? What does the clips look like that holds it in place? I cant seem to get it dislodged and out. Its rusted bad. Also the fuel pump bracket was just laying inside the tank. Not attached to anything. How and where does it attach to? Thanks
the fuel pump bracket attaches to the permanently fixed bracket on the gas tank. that cannot be removed. i believe i covered everything in the vlog, but it's definitely a long one so just skim to the important parts and it should help.
Great video :) - subscribed because of Sympathie 😎 How’s the quality compared to Ikeya Formula, GKTech etc.? Japanese dudes use B-Knuckles from Naomi for example..
Oh man, I feel your pain! I stumbled across your channel while researching replacement of my leaky s14 tank. Great video, I love your laid back style and the way you preset your content. So how's your S14 these days?
Thanks for all the support! The S14 is still a work in progress. Unfortunately, even with the plastic welding, my tank cracked again months ago. So the next step is to install a fuel cell! I still need to get a bigger spot before I can move the project car closer to me. Until then, I'm just weathering out the project car storm and building up that "fix-the-project-car" fund! hahaha
Would the max dual caliper knuckles kit could be Installed with all stock suspension other than coil overs? I pulled the z32 rear drum brakes of a car and I would like to get this kit and install it on my car and get the dual brakes plus the drum brakes. Thanks in advance
The max dual caliper knuckles are drop knuckles so it will most likely get your stock suspension geometry out of alignment. I can't 100% confirm that it would work, but if you can compare your stock knuckles to the part shop max ones and visually confirm that the drop isn't too aggressive, then technically it should work. hope that helps! but just double check before you do any installing. It's super tricky to get that lower control arm nut on the knuckles and get it torqued decent enough.
@@FittedLifeCollective gotcha… thanks for the quick response. I am going to look into this but I already made a purchase for the front and rear brakes. I have not yet purchase the knuckles or the 2nd rear set but would consider upgrading my whole suspension in the future.
