Oceancarestore.com is an authorized, online dealer of Oceancare Products, the world's best cleaners and sealers for stone, tile and grout. We have everything you need to protect, maintain or restore your floor, wall or pool tile. Biodegradable, non-toxic cleaners and industry leading sealers for all your tile maintenance needs.
On this channel we'll discuss and demonstrate our products, answer your questions and pass on some of the knowledge we've gained over the years.
Used pool acid once a week to maintain pool balance and it disappear on its on. This year I didn’t clean the pool as much as I used too. However I also learned more about my pool character then I have in the last 20 years. I have several properties with pool and I used last chemicals saving money but using pool acid every two weeks. It keeps the pool perfectly balance with let’s the algae and hard water away. I super chlorine once a week and add chlorine tablets as needed usually once every two weeks as while. I recommend you brush the pool sides every few days which I haven’t done myself due to the many DIY projects I’m doing!!! I hope this helps someone. Which the price of pool chemicals and hiring pool service things can start to be affordable fast.
Thanks for this! As someone who just arduously spent 2 weeks scraping 20 years of calcium build-up on 156 tiles, this video was a goldmine to ensure all that hard work doesn't go to waste.
My maintenance company who also built my pool, charged me $175 for a treatment to prevent calcium build up. My pool is only a year old. We never had any calcium build up. After week after this treatment there is calcium build up everywhere. Im so confused. Anyone know what may have caused this?
That's a hard one to diagnose with just this limited info. There could be a lot of factors involved including water chemistry and the details on exactly what product they used to treat the tile. You could start by finding out what product they used and then maybe consider having your water tested by a third party, many pool supply stores will do it for free.
I have black glass tile Saltwater pool with chlorine. My glass tile has a white film I can’t get off with vinegar would this spray work and what type of brush since mine is glass?
Black tile in a saltwater pool could be a challenge to keep looking clean. But if the residue is calcium based, yes this cleaner should break it down. I'd use a stiff plastic bristle brush and/or a non-scratching scouring pad. If the residue is mostly salt based and the Calcium Releaser doesn't react with it, you might end up having to have the residue removed by a pro using a light blasting media that doens't damage glass (i.e Maxxstrip) and then, once clean, apply the Oceancare Glass & Tile Shield. Then try to clean regularly with the Calcium Releaser to not let it build-up back to this point. Obviously proper water chemistry and salt levels will go a long way to slow down the build-up as well.
Does this stuff effect your body siting in water and all those chemicals? I'm very sensitive so I'm trying to make sure the pool water after this, isn't going to pull a pool of chemicals now 😮
The chemical is fairly safe and I've never had any issues and have never heard of any issues in the field. But if you have chemical sensitivities, I understand why you want to be cautious. The SDS (safety data sheet) for each product is included on our website so you can see all the health and exposure information.
Hi There. The small amount of cleaner that ends up in the water is generally not enough to have any noticeable affect on the water balance and no adjustment is needed. But the only thing that could possibly be affected is the pH. You can always check the pH before and after cleaning and adjust as needed if you really want to be sure.
Bought the product. Left under plastic after scraping for a whole day. Did nothing. Tried it again for 19 hrs under plastic wrap. Did nothing. Complete waste of money.
Helpful video. I have shiny glass tiles around my pool. My calcium buildup isn't that bad, it is a calcium water line & the tile looks dull. I have found that liquid car wax does it all. it removed the calcium water line, makes the tile shiny, and protects the tile. Just put a dab on a rag & rub it in really well, and then rinse it off. DONE!
I bought everything and followed the directions to a tee. It did not work, and when I posted that, Brian asked me to take pics of the pool and problem. Not only did he give me feedback on why it probably isn't working (because it is likely salt not calcium build up), he offered a money back return with free shipping. Very impressive customer service, and if I ever need this product, I will come straight to Ocean Care. Now to figure out my next move to treat the saline build up.
Sorry to hear you didn't get the results you were hoping for. Obviously, not all build-up is created equal and some issues will require a different approach. Please feel free to reach out to us via email (info@oceancareproducts.com). We'd be happy to take a look at photos and see if we can offer any guidance and work with you on a resolution.
Everything has to do with water chemistry. We now know that most pools need lower alkalinity and lsi balanced. We usually clean tile one and never again.
Window scraper, then muriatic acid dispensed with a SIRACHA bottle with the green needle head. 2 or 3 passes will remove 90%, waiting 5-10 min between each pass. minimal effort and cost.
okay so you edited this video down to 6 minutes.. Fyi if I spent 6 minute on 15 areas each about the same dimensions as yours... I would just pay someone to do it.. how ever I know of a much faster easier way to accomplish the same if not better results... nylon filament wire brush preferably on a cordless drill to break away the larger calcium deposit..then Muriatic Acid and viola done, in just a fraction of the time.. P.S. mine is Stone waterfall which is much harder to clean then a tile..
I've mentioned before that this particular spillway and spa waterline took about 3.5 hours to clean and a little less than a quart of cleaner. But this tile hadn't been cleaned in over 2 years so it was fairly built up. But once it was clean and the Glass & Tile Shield was applied, it has been much easier for the owner to keep it looking good and has stayed pretty clean with just regular brushing. About 2 years after doing this video, I deep cleaned this spillway for the owner again, reapplied the Glass & Tile Shield and had it all done in about 30 min start to finish (the build-up was minimal). It's definitely much easier if you stay ahead of it with some preventative maintenance. Regardless of how you get your stone waterfall clean, to help make life easier in the future, I'd first seal the stone with Oceancare High Performance Penetrating Sealer, let that cure for 24 hours, then apply the Glass & Tile Shield. Future deposits should be reduced and easier to remove. Thank you for the comment.
I have a pebble tech pool. I have calcium streaks around the wall both above and below the waterline. I’ve drained the pool and am power washing the pool to get rid of algae. But my walls look like they were attacked by a fli k of birds. Any suggestions.
This particular spillway and spa waterline took about 3.5 hours to clean and a little less than a quart of cleaner. But this particular tile hadn't been touched in over 2 years so it was fairly built up. But once it was clean and the Glass & Tile Shield was applied, it has been much easier for the owner to keep it looking good and has stayed pretty clean with just regular brushing. About 2 years after doing this video, I deep cleaned this spillway for the owner again, reapplied the Glass & Tile Shield and had it all done in about 30 min start to finish (the build-up was minimal). It's definitely much easier if you stay ahead of it with some preventative maintenance. Thanks for the comment.
Muriatic acid can have it's place but it is a very corrosive chemical that many people are not comfortable using for a cleaning process that might get it on their skin or droplets in the air. Plus it can also be damaging to cement grout and sensitive tile finishes (like iridescent glass tile). No gimmicks here, just a different (and in some ways better) option. Thanks for the comment.
The easiest way I have found is using a Power washer of 2000 psi or greater..no scrubbing. Easiest less work!!! The only thing is that you need to test is the distance and angle when using the washer. You would think going closer to the calcium would be more powerful...but its about 4-6 inches away on an angle that starts to break it up. Its almost as if a certain frequency of the distance of the spray works. You hold it on a spot on an angle..and then wait..you can see the shape of the sprayer becoming less white against the tile. I would do a pass and then see there maybe another layer to do but much less noticeable. I would spend about 20-40 seconds on a tile moving slowly. 2 Passes to get it. There might be a part where it seems thicker...do a third pass on those spots.
Cleaning a heavily textured stone can be tricky. Because of the uneven surface, it's obviously a lot harder to use a scraper to get the heavy areas clean. If it's a heavy build-up, it might be worth it to go through the process of getting it media-blasted. And then seal it, protect it with the Glass & Tile Shield and then implement a more regular maintenance program with the Calcium Releaser to keep it clean moving forward. Good Luck!
I used a pumice stone but already used most of it on just one tile, that's out. Didn't want to try the metal scraper because I thought I would do damage to the tile. Gonna try that now that I watched your video. Our water here in Visalia, Ca. is horrible! Alkaline build up you wouldn't believe! I blame the city for screwin' up my pool! Gonna try your products too. The calcium build up is so bad, it looks like chunky globs of dry cement that would take a jack-hammer to remove, lol. New homeowner here and they left the pool in shambles!
if this works then shouldnt you be selling this to all pool installers for pool w a tile line? You say you have a sealant for after cleaning off the build up, then it would be better to put the sealant on the tiles for new pools first to avoid build up ever???? this should be your selling point
Will this work on hand painted tiles in fountains? I’m project manager at a huge outdoor mall with tons of fountains with massive calcium buildup… any advice will help thanks
It certainly could help. Fountains can be difficult because the water chemistry is often overlooked (since no one is swimming in it). And with hand painted tiles your options for blasting or other aggressive cleaning methods might be limited. We'd be happy to take a look at photos and gather more info. Feel free to reach out and email info@oceancarestore.com
I purchased these products and also saw little to no difference. It’s almost a joke that it’s sold in a 32 Oz bottle (other than needing a dispenser itself). I’d need to repeat this process many times with many bottles in order for this to work.
I bought your HIgh-Performance Enhancing Sealer to use on my 1,100 Sq. Foot PA Bluestone (select blue, thermal finish). I was tremendously disappointed to see that it did not enhance the color of the stone AT ALL. Perhaps the bluestone is more dense and thus didn't allow sufficient penetration to enhance the color.
Thank you for your video. Do you have a video showing how the sealer looks if you want to keep it close to its natural color stone? Your video is only showing the darker color stone once it’s been applied. I want to keep my stone looking natural not darken. Also, do you mix the sealer with water or anything or is it ready to be used? How do I determine how much sealer I need, I have two patios and a long walkway?
Hi Regina, I don't have a video showing it but to keep the natural look of the stone, you would use Oceancare High Performance Penetrating Sealer. And no, the sealer is applied directly from the bottle, and is not mixed with water.
I think the product is working on my pool but your spray bottles are totally useless. I attached the spayer to the calcium remover and as soon as I started to spray it popped off the bottle which fortunately didn,t fall in the pool. It landed on the deck and about cup or more spilled out. I then tried to line up the spayer so it was tight but it still slipped off so I duct taped the sprayer lid on and it still leaked as I was using it. Today I started using the sealer in my shower and sure enough it popped off as well and spilled a large amount on the floor. I resorted to the duct tape again and it still leaks out as the spray works it way down the side of the bottle. For that price you should be able to supply a decent spray bottle.
Hi Heather, thanks for letting us know. Please reach out to us through the website or via email. If there's an issue with your order or the bottles, we'd be happy to make it right for you.
I have this problem too. I have a saltwater pool and for some reason, I didn’t expect the build-up. I assumed the salt water would be akin to having a water softener in the house. I guess I was wrong. My build-up appears to be coming from the grout lines. It’s not really all over the tiles except where it’s spreading from the grout lines. The grout lines do appear to be poorly grouted in those areas and they are mostly around the spill over. Would you suggest re-grouting after cleaning with your process? Thanks!!
Ridiculous. Forget the chemical strippers. Use a pumice stone. Or an angle grinder with a paint stripper pad found at Harbor Freight. Fast, simple, works. Experts use a glass bead blasting process on really bad surfaces. You can use a spray vinegar if you need more accelerant.
You've made this so much more difficult than it really is. All you need to do is put muratic acid on it. I use a 50/50 mix of muratic acid and water in a garden sprayer and even the biggest calcium deposits wash away easily. Done.
@@armandosoto8625 Just spray it on. I don't recommend the garden sprayer anymore! Get an acid sprayer off Amazon. It's the same thing, it just won't corrode.
If the area in question is normally underwater, then you may not have a calcium deposit issue as these deposits are the result of water evaporating from the surface. But yes, the area needs to be dry for the cleaner to be effective. I've seen contractors construct dams to keep step or baja shelf areas dry for tile repairs but that might be a bit extreme for cleaning.
@@oceancarestore7831 It's definitely some kind of buildup between the grout. I have your initial cleaner spray. I use it on my infinity wall, but didn't have much success, i think i need to commit to letting it set though.
Cement based grout will always have some mineral content that can react with calcium cleaners and you will likely see bubbling when it is applied. However, the Calcium Releaser is much safer for colored grouts than mineral acid cleaners like muriatic acid. Thanks!
Thanks for the question. Yes, this can work for natural stone/colored grout and is much safer than using a mineral acid based cleaner like CLR. But keep in mind that if the stone has a high calcium content, ANY cleaner that breaks down calcium could etch (slightly dull) the stone. As such, we always recommend doing a small test spot before cleaning the entire area.
