Hi. I'm sorry didn't get what you mean:). If it is about translating rpm to car speed... I guess you can do this simple math using car wheels diameter. But it would not be the same value in real test.
Esc s.click.aliexpress.com/e/_EzksY4x Motor s.click.aliexpress.com/e/_Eu7Wunp Servo s.click.aliexpress.com/e/_EjREeyj Motor mount s.click.aliexpress.com/e/_EwWi2hz Transmitter s.click.aliexpress.com/e/_Eu0kXYX
@@LeoRcCars I just installed the 370 motor and v3 esc and receiver. I’m tried using my stock batteries that came with my c24 but they only last like a minute or two
@IronMountainPlumbing I see, I don't like wpl esc so I'm using simple cheap 60a esc with t-plug. Those batteries are easily to find. For you I think would be good just re soldering wpl plug to t-plug and do the same. Or soldering is difficult for you?
Great, so you could change wpl plug to s.click.aliexpress.com/e/_EQcFliB and after that you could choose bigger battery;), make sense? Just be careful with + and -. I burned one board by mistake:(
@@LeoRcCars All that’s offered is PLA. I was able to push bushings into the larger holes in the short links. I don’t know if that’s what you intended, but they fit. I think where you need to allow for them too is in the connecting link. The ends would need to be beefier/ more substantial to do that.
@@kodak_jack yes. Big M3 bolts 13mm long from suspension should be pushed into big holes. For the links the holes is smaller since it would make additional friction that I wanted to avoid. I printed in PETG. Hope it will last long you will be happy with this mod ;)
Wheels - s.click.aliexpress.com/e/_EyiitIf Esc s.click.aliexpress.com/e/_EzksY4x Motor s.click.aliexpress.com/e/_Eu7Wunp Servo s.click.aliexpress.com/e/_EjREeyj Motor mount s.click.aliexpress.com/e/_EwWi2hz Transmitter s.click.aliexpress.com/e/_Eu0kXYX
Laser Tachometer: s.click.aliexpress.com/e/_DlpKA11 Brushless combo: Motor s.click.aliexpress.com/e/_EJQXxeR Esc s.click.aliexpress.com/e/_Euie9U7 Brushed ESC - would work with stock motor but with 3 wire servo: s.click.aliexpress.com/e/_DBMamUr s.click.aliexpress.com/e/_DB5wVNN
@Danielxperez14 that is exactly the same strategy that I taken;) don't forget to watch my other videos especially the one about steering redesign to bell crank ;)
Stock servo died after the water driving))) the stock servo is 5 wire. So if you didn't change ESC you are limited to the stock. 3 wire servo im using s.click.aliexpress.com/e/_Ez88MOJ 5wire servo for stock esc s.click.aliexpress.com/e/_Ew2qDqT
Please refer to this FINAL design of this idea, simple and easy and 3d printed! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k2moTakhn9I.htmlsi=AkvYN7E_hn_vhhDP
3d model and details www.printables.com/model/884781-wltoys-12428-bellcrank-steering-final Please be aware - I've uploaded "enforced" files for the plate and long crank - after a few crashes, it appears that those parts need more strength ;)
What you need as an extra 1. rod linkage (preferably with adjustable length) 2. two M3 bolts 13mm long from suspension (if you plan to change the stock) or order search on Aliexpress by “M3 12428-0099”, I used this - s.click.aliexpress.com/e/_DlK7D6b 3. two M 2.5 20mm bolts and two nuts. I used from there bolts - s.click.aliexpress.com/e/_DChSrTd nuts - s.click.aliexpress.com/e/_DmJzKkT 4. print models - www.printables.com/model/875039-wltoys-12428-steering-upgrade-to-bellcrank-appoach Reused part: - all the other rods used in steering are stock *QA * What about stock suspension if I want it to stay it should fit since the pannel that holds the bellcranks should fit right under the shocks Is the project done NO!!! it is just a firs version, not fully tested yet but will be soon, please subscribe to my youtube channel so I'd know that you are interested!!! ru-vid.com/show-UCLE0Gmir5LrE8t9jllJq6vQ
Please have a look at the most recent upgraded version of this design. Thanks in advance- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k2moTakhn9I.html
Hi. Thanks for asking. I ordered not RTR version so only stock servo is there. So esc is some cheap 60a and transmitter is 3 channel to support gear change . And the battery is 2s from one of the wltoys models.
Hi @jimmy. The other mods are- locked rear differential( tried the metal one but it's been a wrong size), magnets to hold the body, other wheels, shocks are still on the road...
Was it usefull for you? or it's just .... of .... ;) Dont forget to like it or even to the magic and subscribe ;) also watch my other how to videos - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CkENgR2BgSU.htmlsi=_Llw-OV1P-JpGoHV
Callibration - turn the transmitter on throttle to the maximum, connect the receiver to the electric tuning, power on the electric tuning, hear a sound D, turn the throttle to the minimum, after a sound, the throttle returns to the center, rings several times, the last long sound, and the throttle calibration is successful,
Thanks;). It's a good question, i do know people tend to redesign Wltoys 284131 to improve its drifting capabilities, as for this one no idea) what would you upgrade?
@@johnmachter40 hmmm, strange, is it really it? Not just a connection issue? Since mine is still ok both on this car and a drift model. As for the battery... it depends on how you drive) bigger battery will add more weight, right? Maybe it's easier to get a few spare but the same size?
