Thanks for the video. I got so frustrated with this. The Miele rep gave me a couple of the bins, but I still could not open the bins to take out the filter. Finally, I did it by sitting down and anchoring the bin between my legs, and using my body weight while pressing down and turning the top, and voila! It came off quietly. So I think one of the keys is to really really really press down while twisting.
Thank you for focusing solely on the nozzle/head and showing the underside! I have back pain and the Classic C1 turbo was too hard on my back. This power nozzle with the big wheels and height adjustment capability should work much better for me ! Calling these vacuums “she” was an unexpected touch that appeals to me too! :)
Thank you very much ❤ You are a great help to me. I was quite unsure abput the where what why. But now it's clear to me. Yay. And I now know that after years of use I would do well to change my filter Haha I vow to do better. Thank you and best regards from Germany ❤
No, hissing is NOT normal! Check again to make sure that the filter is indeed seated all the way down, flush with the vacuums body. Also, make sure that the grey rubber gasket around the HEPA isn’t twisted or folded…. If it is - air will flow incorrectly around/through it (and can act like a harmonica LOL!) Take it out, then carefully reinstall…. If there WAS a fold, you might have to encourage it to lay flat again by pushing the rubber back into place with a screwdriver or pencil as you push the filter down into place. This is a little more common with HA50 hepa’s like on C3’s or compact models (as opposed to other models using HA30. Also make sure your filter is GENUINE Miele! Many times I’ve seen fake filters installed perfectly correct, but because the fitment is poor, they’ll hiss. Hope that helps and thanks for watching! (PS - if you haven’t already- please consider subscribing….it would help us so much!)
You’re most welcome! Thanks so much for watching and writing :-) PS - if you haven’t already, please consider subscribing…. It would help us so much!! :-)
I couldn’t workout where this HEPA filter went until watching this video been using this hoover for a few years now without it. Do not do what I just did which is squeeze that bubble until it bursts that red ink makes quite the mess.
Even Miele customer service couldn't help me figure out how to change from the AirClean to the HEPA filter. I was afraid that I was breaking my new C3 by pulling that cage out! This was perfect -- Miele should link it to their manual. Thank you!
Sorry, NO they cannot be reused. Miele HEPA filters (the ones in the BAGGED models) are very fine, tightly-woven material that trap microscopic particulates from going into your breathing air. They are intended to be discarded and replaced after about 1 year (or 50 hours) of use. Triflex HEPA's can go 2-3 years, and should never be weeted! There may be SOME "HEPA" filters out there that advertise they can be washed, dried and re-installed. But my experience is that it's nominally effective.... This kind of material is so fine that it tends to hold the water, turn much of the dust to cement in the pores, and sometimes breed mildew! (as they don't dry easily or quickly.) Then, with partially-blocked pores, the vacuum struggles to "breathe" well and runs hot. Not good for performance or longevity! I hope that makes sense and helps :-) Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
You are MOST welcome!! Thanks so much for taking the time to watch and write :-) PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
You are very welcome! Thanks for taking the time to watch and write :-) PS - if you haven’t already, please consider subscribing….. it would help us SO much! :-)
Oh of course… Most everything is made in China (except for Miele - but even they have a few models partially-made there.) Fortunately, the quality, fit and finish of these China products are excellent. But can’t lie, it hurts my heart to have so much made over there instead of here :-(
Aww, thank you so much! I'm a visual learner, myself, so I live off of how-to videos! These are fun for me to do :-) And I agree...even Miele's instruction books are pretty lackluster and confusing! I'm so glad to have been of help :-) Thanks so much for taking the time to watch and write :-) PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Aww, thank you so much! Thanks so much for taking the time to watch and write :-) PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Yay! Glad this was helpful :-) Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
This is the only time I think I'll ever watch a vacuum video (because I was about to buy this model and wanted your take on it), but thank you for taking the time to teach in such an effective and concise way. After reading your thoughtful responses to comments below I'll like and subscribe
Thanks for the explanation of the time strip. I originally thought that it worked like an egg timer and ran through the chemical reaction in a year regardless of usage. Now I understand that it runs more like a stopwatch. It starts with the heat of operation and stops when the vac is off. Makes more sense. By the way, I visited a cleaning channel that you once posted a comment on, cautioning the host about not using a house vacuum to vacuum up baking soda powder off a mattress. This was some years ago. Her recent video on freshening a mattress with powder now cautions the viewers to only use a shop vac. I thought you might remember and appreciate that your efforts extends beyond your immediate audience.
So glad this info was helpful! I still like to change my own HEPA filter based on time. But that Timestrip really is a lifesaver for many of my customers who use their Miele waaaaay more than the average! They would have overheated the vacuum had it not been for the Timestrip's warning! And thanks for that neat little "blast from the part!" That definitely made my day :-) Thanks for watching and writing!
I must say you are awesome with the greatest instructions. I have the Miele C1 Brilliant since 2021. And it was worth every penny. I took it to a vacuum cleaner specialist I've trusted from my Mom's business. When I asked if they were familiar with these vacuums. They were & even sell them. I had them clean out my vacuum & it continues to work tough. The problem was my kid was vacuuming dog poop.
Thank you SO much!! I appreciate the wonderful compliment, and you taking the time to watch and write :-) I have a Brilliant at home too! It's the BEST of the best indeed! But doggy doo is the worst....you may never get all the smell out of the hose (especially because it cannot be washed due to the electronics in the hose.) But good luck going forward and happy vacuuming! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Oh I'm so glad this was helpful for you :-) Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Oh wonderful! :-) Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Is the Cat & Dog charcoal filter a HEPA filter? Does it catch the same particles as the HEPA filters that come with the other C3s? I heard you say that the charcoal filter does not have HEPA media in it. I am concerned about allergens.
Oh that's great - so glad it was helpful! Thanks so much for watching and taking the time to write :-) PS - If you haven't already, please consider subscribing - it would help us SO much!!
Aww you are so sweet LOL! Glad to be of help :-) Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Hello, I bought a vacuum cleaner in the Teleshop store. It had very poor suction so I returned it. Consider performing more difficult tests that involve crushing/stomping on crumbs/dirt on carpet etc. and then vacuuming them up. This is a more realistic te
Thank you so much, I appreciate you taking the time to watch and write :-) I'll definitely consider your suggestions for the future! PS - if you haven't already, please consider subscribing.... it would help us more than you know :-)
I bought a Miele C3 on an online Black Friday sale from what turned out to be a Canadian reseller (a legit one, but yeah Canadian). I understand I don't get to take advantage of the warranty. But if I ever need to service it in the United States, at my own cost, could I bring it in to a U.S. service center?
That "indicator" you see is not a light, actually...but a mechanical strain-gauge that will give you a visual clue as to the vacuum's air-flow... When the airflow is blocked or restricted too much, you will see that little orange tab inside the pull over into view. So there are a few things that will trigger that indicator..... When the Bag is full / When the filter is clogged / When there is a CLOG in the hose or Wand / when you are using TOO HIGH SUCTION on a particular surface / or are cleaning a surface that itself is very restrictive (like this carpeting, the couch, etc.) *I THINK* based on what you're describing. is just that you're seeing the "airflow restriction" that naturally happens when you put your cleaning tool to the floor. I can't advise specifically without knowing WHICH TOOL you're using, and exactly what FLOORING TYPE you're going over... But if you're seeing great restriction, AND especially if your wand/tool feels DIFFICULT to move on the floor....you're using TOO MUCH SUCTION. Use your control panel on your Miele to dial the suction down a little until it feels easier to move. This means the airFLOW is restored and it will actually clean better!! This is most common when you're vacuuming a RUG, versus bare floors. Rugs are restrictive....you need to give it a little "breathing space" by reducing suction, and/or raising the brushroller height on the electric power nozzle (if you have one) If you're feeling this on BARE floors just using a combination floor nozzle tool - make sure you have the toggle switch set to Bare Floors (parquet symbol) so that the bristles are extended OUT onto the floor. If you accidentally use it in carpet mode on bare floor (with the bristles retracted inside) the nozzle will suction-cup to the floor. You'll see great restriction, be hard to move, and scratch your floors!! Sorry - that was a lot of detail LOL!! Hope it all made sense and helps :-) If not - please write back with more specifics as to what you're cleaning, and with which tool 🙂 Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
Oh certainly.... vacuums can quickly lose suction when the bag gets full and/or filtration media gets clogged. Most Hoover's these days are BAGLESS... and bagless requires a great deal of dismantling and cleaning out to keep working like new. You would notice a slower, but steady, decline in suction in this case But ALSO - looks for overt CLOGS! (like socks, tissues, toys, etc.) We are most likely to pick up something large/awkward (that we shouldn't) when the vacuum is at its most powerful....when new, or just after service. The obstruction will block the airflow, and your suction will diminish pretty dramatically, and quickly. SOME clogs are quite small, like a stick, leaf or pin..... these won't fully block the hose. But other debris like hair, fur, and carpet fiber will CATCH on it and form a larger, obstructive clog more slowly. These are sneaky!! So inspect for clogs, then perform all the routine maintenance of the filtration system - and brushroller - as instructed for your model by the manufacturer. Best of luck! Thanks so much for taking the time to watch and write! PS - If you haven't already, please consider Subscribing....it would help us more than you know :-)
I just bought miele c3 powerline and it contained only universal brush. I wanted to buy this nozzle but would it fit with Miele c3 complete since I see some kind of electric thing in it? Thanks
It depends on WHICH model C3 you purchased... Everyone is called "Powerline" (which I find to be confusing.) If yours only came with the Combination floor tool (non-electric) then you have one of the "Pure Suction" type models. This means that your HOSE and WAND are "NON-electric" - meaning they have no wires inside to power an "electric power nozzle" (like the SEB228 or SEB236.) So the *short answer* is NO, you cannot simply buy a power nozzle and have it work with your model. Keep in mind - that P.N. is designed for deep-cleaning carpets and RUGS.... so if you don't have those, it's pointless. But if you DO - especially if you battle high-traffic and/or PET fur - it's pretty essential! The *long answer* is that because it is a C3, every model still does at least have an electrical OUTLET plug (by the hose connection to the body, covered with a little grey snap-on cover.) So you CAN buy a P.N.... but you *ALSO* have to buy both a SET220 electric WAND and SES121 Electric HOSE to make it all work. It's a 3-PART system that brings electricity down to the electric motor in that power nozzle. That unfortunately is an expensive endeavor (somewhere between $450-$500 for all 3 parts.) And that's WHY "Power Team' canisters are so much more expensive than their lower-end siblings. But truthfully, buying a P.T. up front is a huge bundle discount over buying the electrical system separately later. But I've had a good handful of customers do that UPGRADE, happily owning both SETS of hose-tool systems. They each have their advantages, depending on what you are cleaning..... the pure suction system is very light and comfortable and is perfectly fine for bare floors and dusting. Whereas the electric system is unmatched for the cleaning power of rugs and carpets. LAST TIP: If you can't afford to convert your Miele to the electric system. **You can also just buy a STB305 TURBO carpet brush attachment**, just by itself ($142, I think). This brushroller works by the power of the suction to make the brush spin. So it's more effective at cleaning rugs than just surface-cleaning by pure suction (with combi tol). But it's not as powerful or deep-cleaning as the electric nozzle. A good compromise :-) >> See OTHER VIDEOS discussing TURBO nozzles vs PN for more detail. Thanks for watching, and for the great question. I hope that helped :-) PS - if you haven't already, please consider subscribing and sharing with your friends....It would help us out more than you know!! Thanks!! :-)
@@QueenVac Is SEB236 better than SEB228 in real life testing? I get you can make more money as a seller to recommend me the more expensive option but I guess I dream of that seller that truly respects their customers because he/she wants long term loyalty from them.