Тёмный
Glenn Kling
Glenn Kling
Glenn Kling
Подписаться
3.8 GM V6 serpentine secret
1:37
6 месяцев назад
Remove blade adapter without puller
3:46
3 года назад
Latch trunk Lexus LS460
5:36
4 года назад
Комментарии
@aaronmcgrew516
@aaronmcgrew516 Год назад
Same problem, awesome video, drilled center out, inserted a paper clip, bent on both sides, filled in bottom with JB weld. IT Worked, saved $250.00
@timw4383
@timw4383 Год назад
Thanks. I will never own another Lexus. It's been nothing but these sorts of problems.
@GDadsWisdom
@GDadsWisdom Год назад
Hi Tim. I bought mine with 150,000 miles on it. I have been very satisfied with the car and now I have about 190,000. You can't beat it for those long road trips; there is nothing like it. Sorry you had so many issues.
@harrison1419
@harrison1419 Год назад
Had the exact same problem on my LS 460. I was able burn holes in both plastic using the metal in a twist tie wire- make sure it's red hot; and then used the same wire to hold them together like you did but with coils on both ends,then reassembled. Works like new. Thanks!
@GDadsWisdom
@GDadsWisdom Год назад
Hi Harrison. Your method sounds like a easy way. My trunk is still working properly. I hope Lexus upgraded their design. Glenn
@muatasimalshubaili6087
@muatasimalshubaili6087 Год назад
Thank you for posting this helpful video. I have a 2015 Lexus LS 460L with the same issue you had. I'll try to do exactly what you did, and hopefully, it would have me $600+ for this part.
@philipthomas6808
@philipthomas6808 Год назад
I just recently purchased a 2012 LS 460 with 122000 miles and now after 3 months of ownership my trunk lid is no longer opening no matter which button I push, I think the latch motor has failed, so I'm go glad I bought an extended warranty and only will be out of pocket for $100 deductible... Let them fix it...😆
@GDadsWisdom
@GDadsWisdom Год назад
I received a question from Eric Sanichar about the type of wire are used. It is somewhere between 21 and 23 thousandths diameter, steel, malleable (bends without breaking). By the way, the latch is still working :-)
@GDadsWisdom
@GDadsWisdom Год назад
The wire is coated so it does not rust
@esanichar
@esanichar Год назад
What type of wire you used
@GDadsWisdom
@GDadsWisdom Год назад
It is somewhere between 21 and 23 thousandths diameter, coated (no rust) steel, malleable (bends without breaking). By the way, the latch is still working :-)
@ronaldzarriello1756
@ronaldzarriello1756 2 года назад
Great job. I have the same problem. What connections did you make with the battery to test it? Thank you.
@ben201193
@ben201193 2 года назад
Great explanation and a lot of help. Not skilled enough to drill and wire, however a split keyring from a keychain worked to hold the outer plastic piece in tension. Thanks for describing the problem and the fix. Getting the trunk liner out was another story... No one has a video for that.
@ewood5918
@ewood5918 2 года назад
Very interesting way to do it... I just happen to have a tap set and no puller... will this work if there is no broken bolt?
@GDadsWisdom
@GDadsWisdom 2 года назад
Hello E. You will need to put a piece of rod in the tapped hole in the engine shaft so the new bolt in your newly tapped hole will have something to push against, without the rod you would be pushing against the threaded hole in the engine shaft and damage those threads. Good luck my friend.
@inphinet
@inphinet 4 года назад
I did this now I installed it back fixed in the trunk lid and the trunk lid dose not grab the latch, how do I short the battery or do you mean disconnect the car battery then reconnect and then it should work, thanks.
@GDadsWisdom
@GDadsWisdom 4 года назад
High Meekboy. My 2011LS doesn’t have a key lock for unlocking the trunk. I guess they figured since the electronica lock would never fail you didn’t need a key lock ha ha
@MrMeekboy
@MrMeekboy 4 года назад
Faced with the same problem, I changed the lock twice, and the price was highI found a solution to a problem. I left a car trunk ls460 open manually with the car key