*FLOP* Because you can't read the registration plates, and you need those to prove a claim against another driver. *FLOP* Because you waffled on for 7 minutes with minimal recorded cam footage at the end. *FLOP* Because you didn't fully understand that motion detection isn't just to catch a thief, but to record impacts in parked positions such as car parks where someone might back into the front of the car and then just drive off.
@@Thisismyyoutubechannel69 Hasn't failed me yet. The price isn't bad and the videos are pretty clear. At night it's hard to make out plate details on the footage, but still worth the money.
@@karthikeyanlakshmanasamy5974 You can just plug the sd card into a laptop. You can chose what program to use after that. Or you need a sd mini card adapter to make it work sorry.....
Unlikely you need new bits , a router bit rotates and cuts clockwise therefore you have to move the router anti clockwise ( i.e left to right ) to get a clean cut , doing it the opposite way is in effect like using the back of the blade to cut therefore creating a poor finish.
Great review, but I disagree with 3:20 Motion detection isn't really for break ins. It's for dings and collisions when the car is parked up. I do agree that we need a system that adds side or 360 views, that doesn't cost the Earth.
Ooh nice starry PS4 :) I've come to your vid and hope it covers all the steps accurately. The others seem to miss steps off weirdly. Good to hear another Brit also. Not that I'm racist haha :)
Only thing that puts me off is the silver surround around the camera lens, makes it really stand out, I really want to get a dash cam but like this dude pointed out I can’t see the point in having a security feature that is going quite possibly encourage people to break a window and take it. Would of been much more subtle if it where all in black
Thank you! At last :) After watching about 6 videos of people showing how they take the bubble wrap of and unbox it without showing how to assemble and use it. Very useful.
Hi, wondering can you help. Every time I put my SD card from my Orskey DC and load the video on my Mac, it comes up extremely glitchy and has a big green screen on the bottom. Tried 3 different SD cards. Any idea what’s wrong
Likely it's file format compatibility with your Mac / encoder. Have you tried using something like VLC? What file type is saved to the card? Did you format the SD card on the Mac? If so, what file system?
@@literate-aside I've been unable to use my dash cam that my daughter bought as a gift for me 2 yrs ago. It keeps saying my S D isn't compatible and I've bought two different ones. They work perfectly well in other devises.
@@gailscaife2842 check with the manufacturer what file system the dashcam requires. SD cards will often come formatted exFat etc, and your cam might require something else. Formatting the card in Windows to a new file system is very simple.
@@literate-aside Hi Anton I have tried reformatting as well. I've been in touch with the manufacturer & they are sending me the correct one. Thank you for replying.
thanks for the video. never used a router in my life and the other channels assume too much sometimes. I feel safe enough to give it a trial now and comments section below is also informative.
I'm going to start making update videos first week in January and I'll include things missed out and what people have commented about, thanks for the comment.
Yes I'm planning on making update videos including this one with night footage, also to take a better look at number plate footage, bare with me I'm sgoing to start recording again 1st week of 2021, dash cam will be first
A router can be used in either direction the way I was using it is called climb-cutting, it all depends on the direction of the wood grain. If you're inexperienced yes you should go anti clockwise as it's smoother and safer, as long as you go the same direction as the grain it's not a problem. climb-cutting is just harder to control.
That's rich as 99.9.% of people who watch loose women are obviously from council estates any woman with any real class knows better than to watch that trash 😂 so I've been told 😁
Hi thanks for the great video - you also mentioned there is another video to get the best price on Amazon but cant see the link, please can you advise?
Hi yes sorry about that i removed that video, but heres the link to the price checker, simply enter the product in the search bar and it tells you if the price of the item is the best price at the moment or if its been cheaper in the past, uk.camelcamelcamel.com/
Thanks Jack. I'm new to routers - never used one before - and the destruction manual that comes with this product is complete pants. I watched 3 or 4 'review' type videos on this router - but none of them show how to assemble it the way you do here. :-)
Sorry only just seen this, undo the nut that holds your bits in place until it comes off remove the collet thats in there and vice versa to replace, ive not done it on this one but thats usually the way to change them, its for different sized bits
Just keep practicing, if you have any trouble let me know, ill double check when im in the workshop later just to make sure and let you know if it's any different to what ive already told you
