Correct me if im wrong but if you disable the panel the way you show here you can still trigger the slc and alarm by shorting the wires once you take them off the pull station to put the new one on right? So its maybe a safer way to disable entire slc if you dont want to activate a false alarm?
I noticed you were using the sd 365 detector with the ms9200... I'm experiencing difficulties with a the same setup only difference is that the number of detectors are about 25 and the system is being upgraded... Has about the same amount of old type detectors? What can I do to get them all active as the panel goes down after a certain amount
I noticed you were using the sd 365 detector with the ms9200... I'm experiencing difficulties with a the same setup only difference is that the number of detectors are about 25 and the system is being upgraded... Has about the same amount of old type detectors? What can I do to get them all active as the panel goes down after a certain amount
Also, would you be able to make a video at some point to show the web-based programming? I don’t think there are any videos of it yet so maybe it could be a RU-vid first 👀
Finally another person who has one of these! I’ve been looking a lot recently for videos of these panels because I think they’re pretty interesting. Awesome video David, keep it up!
Super interesting video! Web-based programming is something I didn’t even know existed! Seems like a system insecurity to me, even if it’s HTTPS and password protected. Neat still.
Are the low frequency sounders loud? It seems like the System Sensor P2RL is overpowering the low frequency sounders and also if you didn't heard System Sensor recalled 29K L-Series Low Frequency Sounders for no sound or low sound output and the ones that are recalled are with date codes 3034 and 3035 and if they're unusually quiet then these ones are the recalled ones which probably they are or not
Depending from panel to panel, you may need level 4 (service mode) access. That’s how it was for my 4100U before I dumped a new job and upgraded to exec 12.08.03
I looked at the manual, it says it puts out full wave rectified power is that true since the device compatibility documents from Honeywell that have their panels listed as FWR some of them put out filtered, so I am curious if this panel puts out FWR?????
Pretty cool! The LED L Series are even newer than these but I'm pretty sure these L-Series are from last year judging on when the apartment was built. The pull stations and panel also look very modern.
Hello sir i have a question , is this device the white one Hwl-lf by itself including a smoke detector or only a sound device ? That can be combined to a smoke detector? Please 🙏 respond sir
IF THEY PULL THE FIRE ALARM IN 13 YEARS IN LAS VEGAS IN PUBLIC BUILDINGS AND THER RU-vidRS HOUSE AND A MANSION, THEY ARE GOING TO BE PAYING A 200,000 FINE. IF YOU DON’T PAY A FINE, YOU WILL GO TO JAIL FOR 10 YEARS.
I was in a hotel with a very similar system (NS's and sounder bases) when they activated at 2AM just because someone decided to pull a pull station for no reason. This system, just like the one I encountered, also has all of the NS's in sync but the sounder bases are out of sync. I wonder what causes them to be out of sync.