Excellent video! I need to order and install some new shoes (and tires) for my Navi this week, and had no idea where to start. This is exactly what I was looking for!
Was the rejetting necessary? I want the mnthebox intake but I am running the yoshimura rs2. I notice you are running the same exhuast please let me know
With both the intake and exhaust, you will have a major lean condition which can severely impact motor performance and also lead to overheating and possibly internal engine damage
You could. Unfortunately not all the gas will burn/push through. It also takes longer. So either way you will have to empty the float bowl because of the vacuum.
Guess I should have should have asked my EGR question here. I got the scooter swap shot EGR block off plate. I see on the lower left of the bike where to put the plate but then you have the tube wrapping around to the intake. After you put the block off plate on the lower left side what do you do with the open hose? Seal it off or something?
Yes. If you want a more efficient and trustworthy way to do it you can order rubber silicone plugs on amazon. Make sure you nail the inner diameter correctly. Measure the inner diameter of the hose and match it with a rubber block off on amazon.
@@kyleagg78 I could do a video on it this summer. I have been wanting to do it but it doesn’t do much for the riding I do. I was interested in deleting it, super simple. Another reason is the EGR filter box is supporting my denali soundbomb compressor so I wouldn’t be able to fully delete the EGR
Do you have any videos that go over the EGR? I got a plate to put on to stop the backfire/popping but then what do you do with the hose that was attached there?
On the bar end mirrors did you had to drill it out any for them to fit? I got protaper bars and the hole is too small for the mirror. If the renthal doesnt need drilling or those mirrors have smaller posts i might have to get them.
Renthal did not have to be drilled. Pro taper bars are not meant for mirrors. The bars you get for the navi are meant for pitbikes, and those don’t have mirrors. The bar ends are generic black ones off amazon with a hex on the end to expand the internal bore. That being said, I have purchased renthal bars all my life and have yet to bend a single one
@@pookythomasmoto9147 Thanks!!! Completely new to this and just kept hearing ProTaper ProTaper Protaper so i went with that. Was never really concerned about bending so Renthal seems the way to go to get the look i want. Ill be using this video this weekend to do the carb.
I made it out of an old piece of metal I had laying around. It’s an L bracket form that’s probably 3 inches long and an inch long in the other direction with a bolt hole on either end for mounting and M6 through
You can buy these little breather hoses. They have an aluminum end cap on it that you can get colored. They’re on amazon and work great. The crankcase ventilation hose has a mini uni filter on it
@@pookythomasmoto9147so you still recommend that speaker exactly or would you go with something else? I do delivery on my Navi so this upgrade is a must. Also is there any way you’d recommend modifying the Navi to get 50mph in wind speeds of 25-30mph? I get it to 45mph-47 when I tuck in those weather conditions. Also if I can get to accelerate faster to those speeds? I’m looking into those weights and over all upgrades on transmission. Obviously I don’t know what I’m really doing lol but I’m optimistic and open to any suggestions. Doing that and deleting the rev limiter. Again I’m really looking for advice and would much appreciate it. The Honda technician told me the bike should last 30k miles before needing rebuilds so if I can’t get near there with mods and up keeping maintenance then it’s no biggie. I just don’t like slowing traffic down 😂😂😂
I have not bought a navi yet, but I'm planning to add the speaker already. Great job, budd. And beautiful bike too!!! You've done some good work on it!
By any chance did you make it modular? Ive been wanting to do something like this but withba connector so I can switch back to a stock storage box at anytime