Excellent video! I just received my bench which is identical to this one, except it is a "Youten". I have totally assembled mine but I still haven't figured out what the two little 6X12cm rubber pads were for. Did you use them? If so, for what? The instructions don't cover that...
Never mind - I now think those pads (which were taped to the bottom of the delivery box) were just there to keep the foot of the bench from punching through the box during delivery. They're not used on the bench at all.
Hey Brian, thanks so much for recording your replacement of the front strut of the RAV4. As far as I can tell, it's almost identical to my 2005 RAV4, so it's just what I needed. I really appreciated your approach to the sway bar link. I probably need to replace most or all of the bushings under my car, but really didn't want to take it on at this time. You're also really convincing me to get an air compressor; I love my 18v Milwaukee impact wrench, but wonder if something with a little more oomph wouldn't come in handy at times. Also, grease gun. Anyway, thanks again for sharing, really appreciate the walk through and will cross my fingers for my own project starting tomorrow!
Note: You can even charge off your portable charger/power bank, laptop, generator, & even car if need be. 😊 Important during the heat of the Summer, ESPECIALLY during a Power Outage. But, you can use these during the heat of the day (and recharge at night!). This will be useful in areas who are worried about the grid failing because of people over taxing the grid!!!! (Just an idea, expecially if you have multiple of these!!!! Which is always good to have!!! 😁🤩)
Wow great chiller, I love vevor stuff, I wish this was out when I bought mine about a year ago, I think mine was 900 for a 1hp. Your plunge will cool down much faster and more efficiently if you add a higher flow pump, with a chiller that size you could cool that thing down in an hour with faster moving water. I have the 1000gph Intex spa pump/filter, works great, I sometimes wish I had the one with the sand filter that is 1500gph I may upgrade in the future.
why would this matter? just curious... this red and yellow gonna fade out anyway and if you pierce on through some nail and need vulcanizing on your tires then you wouldn't even know the proper line.. so I don't get the importance of this.
It is about taking care in your work, neatness, detailed. Would you sleep I. A hotel if the bed was not made? Slopiness in vehicle maintenance is potential safety issues...
@@GarageMahalLife not trying to hate or anything but im asking a real question if what are potential risk if this isn't followed? I really wanna know. Because sometime in the future this dots would fade and then when you do vulcanizing service they would remove the tire and put it back in, how would they know if they realign it properly if the dots are now faded.
Yes, that can be troublesome. Best way is to have a chair near the window, get the air unit to the seat of the chair, squat down and lift off the chair with your legs.
Im going to check this tonight but my issue is slightly different. Maybe someone has had to deal with it, idk but I'd take any help with it. 04 Impala. Turn signals cutting out, may work if I flip the Hazards on and off. Read it was a common issue and to replace the Hazard switch. So i did. Both sets of turn signals work now but they all blink fast. Its not the bulbs, I switched them out already. I also checked the fuses. I read it could be an "improper part" with a high power draw but I've only replaced the hazard switch. Also read it could have something to do with the BCM. I'm scratching my head to get this fixed for its inspection.
For people with 2017s for toque values and got the values directly from the Nissan dealership Transfer case both 15 ft lbs Front and rear differential both 24 ft lbs
Any reason why you didn't change the filter when you had the transmission drained? You just changed the screen on the valve body, which probably doesn't ever need to be changed on Nissans. The filter is accessible without dropping the pan but I couldn't see where you changed it in this video. Nissan p/n 3172628X0A probably.
@@GarageMahalLife No, you can see the filter housing on your transmission casing in this video. You only replaced the internal screen which doesn't do much and probably never needs to be replaced. I would look up the part number listed above and consider replacing it. It's probably dirty AF.
Hi. Unrelated from this video. I bought an r410r from you and the gauge broke. Is there any way I can buy another one from you or do you know where to look for another one? Thank you.
Quick question, why’d you use three quarts of transfer case fluid when manual calls for 1-5/8 which equates to 1 and a half quarts? Manual also says for xd models it’s 1-7/8 quarts?
🥃 I actually fill mine to the brim with ice and then with water ,as you drink that lil amount of water it seems the ice freezes to one chunk . Then I just keep refilling with bottled water . Kind of a pain yes but my ice last for 3 days on the road , I do that on hunting trips where we set up base camps . My only complaint is the small hole to refill ice .
Both downstream o2 sensor are welded in.Got a wicked lean code and catalyst and o2 sensor not getting ready..im like why..thinking to just cut the wires leave them in a do what you did with the new ones.
Instead of drawing a picture of the fan belt you should’ve just taken a photo of it from different angles. Don’t wanna be in a hole but just saying lol that’s what I did.
I actally have that exact Komelon tape measure. It has served me well for years. The standout isn't as good as my old Stanley, but I'm not doing commercial construction any longer, so it's not necessary to have 13 ft of standout for marking off bathroom stalls. I also had a tape with magnets at the end that worked great for measuring on metal frames for door hardware. It was very handy on double egress doors. A proper tape measure for the type if work performed sure makes the work easier. Nothing wrong with having more than one tape measure either.
I’m having issues with the water tank. It doesn’t snap in like yours. This is brand new from Amazon as of 2 days ago. When I slide the water tank in and press down, it doesn’t snap. It’s very loose. When you snap yours in, is it loose and comes right off or is it snug?
I have to stand on a stepladder to pull the battery out. Can’t pull it up, out, and over, when standing on the ground.🤦♀️ BTW, my holding bracket bolt is 13mm.