DutchRC Adventures, aka DR-C, contains all kinds of Information & Entertainment with Remote Control! :) I strive to publish quality videos a few times a week with my unbiased take on all kinds of RC's!
hey, I have a problem with my Orion 22, 2 green LEDs are flashing on the remote control and the model doesn't respond, it doesn't move, do you know what to do?
I don't have this setup anymore but it seems like the bind between the radio & receiver is lost.. You need to find out how to bind the them together...
Howdy :) wel basically all their modern 2.4Ghz and 900Mhz can be used with the Tandem radio's. From looking at their site that would be the R9 MX receiver for long-range. I should add that I don't use it myself (I use Crossfire & ELRS most times)
@@eddyultra1 this video will give you some insight into what ELRS modules will work: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bO5PWkJr0nU.html Any Crossfire module with the micro-JR interface will fit / work
Hi, anyone have had experience changing or putting oil in an HBX16889 replacement oil filled shocks? I cant seem to open the end cap off of the one i got. Thanks in advance!
Nice essambley video,thanks a lot🙏😊 A little tipp: use isolation-tabe or srinking-tube to isolate your pinzette😅.your clock battery are still in the radio.and you can make a little shock from your body-electricity👍
@@DutchRC when happen a electrik-shock you can destroy everything what you touch with any metal.(It goes from your body to the elektronik-part you touch in this time)..i crash a smartphone with this "body elektricity",,,be careful👍🙏 Wish you a good time😊
Hmmm that is unfortunate.. Regretably I didn't run into any problem, so I can't really offer pointers.. Maybe try to contact Elefoo or their facebook page?
Hallo. Is dit hetzelfde als de Absima CR9T ? Werken deze receivers op de Absima ?En hoe kan ik het beste de telemetrie kabel voor de externe accu aansluiten ? 🤙🏻
Hallo :) Zelfde zenders inderdaad Maar ik weet niet of Wfly voor Absima iets veranderd aan het protocol.. Dat zie je helaas wel vaak gebeuren als een fabrikant voor een anders "Label" iets produceert.. Hmmmm helaas.. ik heb nog niet iets gedaan met telemetrie met deze zender setup
Any idea why my STL models won't be read by the printer? I can't seem to find out, even after I've placed them in the correct directory with the buddha model.
Does the file (name) show when selecting the model to be printed? The first thing that comes to mind is the file-name (to long? spaces in the name?).. is maybe the STL part in capitals where the printer might not expect that..
@@DutchRC I managed to fix it, but now none of my models (even the buddha) will print properly. It will work for the first 3-10%, and then it just shits out a wirey mess and drags the remainders around before shitting out some more extruded filament.
@@ArandomHitman So what exactly happens? Do the first layers brake free from the printing-surface (then the print-head is probably to far above the print-place).. Or do the layers seperate? These kinds of start-up challenges are common in 3D-printing-land I will say.. but you will be able to find fixes for most any kind of problem
@@DutchRC Lets say im printing the buddha model. It prints the base first (so like 5-10% of the model) and then some filament gets stuck on the nozzle and the buddha remains are pushed aside after breaking free. It then starts repeating this process until it slowly starts crapping out filament in stringy patterns.
Hallo, ik heb extreme shaky/jello beeld op mijn Runcam link nano. Wat kan de oplossing zijn? Nieuwe build. Dus nieuwe props, nieuwe fc,… alvast bedankt .
Howdy.. hmm ja dan komt er blijkbaar een vervelende vibratie bij de camera terecht.. 1ste ding zou zijn: kijken of een goede tune wat helpt, maar als het echt Extreem veel jello is moet je kijken of je de camera in rubber kunt monteren in het frame.... Welk frame heb je BTW?
Might I suggest that, if you are going to show an installation procedure on an electronic or other item, please demonstrate the installation as prescribed by the manufacturer with the provided equipment. To change the items midstream causes confusion, as not everyone might know what an s-bot(?) is. If you wish to add other items or replacement items, please show them afterward. Thank you.
Good point so thanks! I do, in these video's, do have to assume some level of knowlidge etc so it's always a compromise.. But still: thanks for the pointer! Never hurts :)
Super Vorstellung bin auch mit dem Gedanken am spielen mir eine zu bestellen aber bis jetzt scheue ich noch davor , weil sie keine deutsche Menüführung. Und für eine deutsche Version bist du direkt das zweifache an Geig quit
I'm trying to figure out what the differences are between the FGR4b and the FGR4S. The B came with my NB4+ and I bought a few s versions to add to other cars. When I was binding it I noticed the S series only blinds in classic mode not enhanced mode. What are the differences?
If it doesn't work like I showed on the video, it simply doesn't work anymore.. Parts of these motor-order and direction wizards stopped working with the latest BF versions
You have no idea how crazy I was driving myself because of this problem. I've been typing any and every way I could think of saying it into Google and you tube for 2 days. I found this on accident. Had to say thank you
Just want to point out, if you are changing color on purpose you can cut the filament closer to the print head, then pull it backwards out of the sensor - this wastes less.
@@DutchRCOh! A bit of history has gone there. I have watched your video once more and seriously contemplating about putting the Eagle 3 into my coming 4" toothpick build. I am working on a canopy design, that would work with a 19 mm camera. The other contestant is the Phoenix 2 with the half inch sensor, which has also a lovely image. I might mount them with connectors and just swap them occasionally...
@@donphobos Yeah.. On the one hand, it's a shame to sell it.. but in reality I can't be TO sentimental about material things :D The newest Phoenix is a very nice cam indeed.. I have several in quads here.
Ive watched this video at least 20 times simply to get a look at the beauty of this motor on bench. Thank you for all you do for our community, mate! Just placed my order for a set. Cant wait to build my next quad with these. :)
Actually one of the first video's I shot with my (then new) Sony FX30 camera :D Thanks ofcourse brother! Highly appreciated and have a nice Easter weekend :)
I think I probably soldered positive power pad with one of the "M30" element, which extremely close to positive pad. All works good. Should I do some clean solder? or its no matter?
Sir what can you tell me about such a 3 in 1 transmitter? If the control range is more than 60 kilo meters, which supports Pixhawk, I can connect my smartphone to that transmitter and see all the data or camera live on my screen.😶
What 3 in 1 transmitter? This is a Tandem radio.. (tandem as in Two) and it is certainly not a multi-protocol setup. I don't really know the maximum range, but it's not 60KM.
Very different systems. The Skyroid is more aimed at autonomous systems / pixhawk use. Yes the X20 ofcourse has telemetry and can be used with Pixhawk (most any radio system can)
It's a fun and good looking plane I think :D In the Netherlands "we" are kinda always near water, but that's not true for most countries.. That might be a reason for the plane not selling well enough.. ohw and: landing on water is harder :P
check if the Betaflight Configurator says the VTX is "connected" in the VTX tab. (says so on the right.. and you need the flight-battery to be connected).. I'm guessing BF will say it does not see the VTX... right? That then means the setup in your Ports tab is incorrect for the VTX... is it maybe on a different port? Or is the protocol wrong?
@@DutchRC nope, the vtx was showing as ready, but still smartaudio undefined and yes with the battery plugged in and it's going and outputting video, but I can't change the channel or power in betaflight or in the osd. In the osd I can set it to a different channel, but it doesn't save. I even swapped the uart to tx2 and the reciever to tx1, same problem. I'm thinking it must be the vtx table they have on their site doesn't match. The vtx is their brand but they have no manual on it or any support, and they don't sell it separately. I swapped it out for a goku625 I had in another drone of mine and its working properly with tramp protocol.
