Looking at the images it doesn’t show a resonator at the midpipe , wonder if it would sound better if you add one. It sounds very raspy/drony without one.
It has one from factory it was a full exhaust kit, sounds better in person, not the best sound but nothing much you can do with the sound of a oem 1.5 engine.
Los gardalodos (fenders), Las micas de las señales (corner lights), el parachoques (bumper) son differentes. El bonete, y los focos son iguales en la hatchback todo cambia en el sedan. Se le puede poner el frente de crx a una hatchback si se cambian las pizas mencionadas. Pero tendrias q hacer un guardalodo de dos de el de crx y el de hatchback y soldarlos donde se coloca el trim pq el de crx es mas corto.
88-91 crx y el hatch cofre (hood) si son iguales ..los fenders paisa no son ni el bumper ni las puertas pero los paneles de puerta si son intercambiables paisano
Looks great. I have a few questions: Did you need camber bolts to get camber in spec in the front struts? Did you have to change front strut top mounts when doing this job? Any new noises noises after installing these springs? Thank you! I ordered these same springs.
Is the CRX emblem on the door panel glued on.? I have a HF model and it doesn’t come with them. But I bought the emblems off someone with the intent of gluing mine on. Was wondering if anyone has done that in the past.?
Yes, I've done it, did it on a blue set. You are going to have to use a good glue and maybe sand the area or even cut it to fit for better grip, because mines failed and it fell of.
The brackets that bolt to the frame is separate, you still have to use the one on the fog light. You can use that bracket that bolts on the frame with your fog light. I have done it before. The bracket you need is for jdm/edm ef8 fog light.
@JoseContreras-mv5yz those I purchased a while back. They are for usdm crx that bolt on bumper support. If the prelude fog you have has the mount on top you need the jdm to bolt on the bumper support bracket or frame. Check my other video of the fog light installation. Let me know if anything.
If you need I have pictures of the jdm bracket on the prelude fog light loose and installed on sedan that's the same practically. I even have a extra set if you wanted them let me know.
Para colocar el bumper de crx tendrias q cambiar varias cosas Como los guardalodos por que la crx no tiene el filler q tiene la hatchback y quedaria un espacio. Y para cambiar el guardalodo tendrias q hacer uno de los 2.
Nel no lo aga eso no esta de moda. La moda es quedarse orginal o ponerle la versiones japones pero no meterle crx a un hatch o hatch a un crx..almenos que esten en centro america o suda america ya que aya las partes son escasas pero en los estados unidos la moda es original o version japones
Thanks!! I honestly can't tell you. I had some 19 inch accord rims that were to big, I ended up selling them and purchased these from another element owner and sold it right after that.
@@crxevolution5951 it's all good I'll do a reverse Google image search. just picked up an element and looking to do a similar set up with springs and wheels. 🤙🤙
They were crv coilovers and I had to make a couple of adjustments, I was told they fit, so for those who say they fit its a big NO NO. Rear were ok but the tie rod location on front are totally different.
I really don't know. It will be hard to find, I suggest you just keep searching with no rush. They will come up sooner or later. There's a couple of guys on intagram that might have them.
You're rubbing because the OFFSET of the Wheels 🛞 ➕️ those spacers. I am running the same size of tires on my 2004 Element EX, 225/55/R18 (which is the Element SC factory tires size) mounted on a set of genuine 2017-18 Honda CR-V 18" alloy wheels 🛞 (they are +45 Offset) and there's NO RUBBING at all, I am also lowered on BC Coilovers Full Set, so no rubbing neither inside or outside of the wheels well... 😎👍🏻😃✌🏻😄🤝🏻 nice Element color, mine is similar, FIJI BLUE PEARL.
Thanks man ! I’ve been hunting for a CrX and I’m going to check one out today with some rear end damage, (looks like mostly bumper, taillights) Im hoping it’s not rusted because the interior is clean and supposedly was running
Thanks!! I don't even know, I'm going to check to see if I find something, I didn't have them for to long, I was running 19 inch accord rims before I purchased these from another element owner. Same thing I saw his and loved it. But I sold it a couple of weeks later.