What does something like this Cell 4, please comment back.I've called Harbor free and it seems like they all give me different prices.Would love to know what you paid.Thank you
They both can the lid is just a sticker and the one on the front is just 3m putty stuff get a heat gun or blow dryer and they’ll come right off no holes or anything
judder spring goes on as the 3rd piece not right after the first , after the judder spring goes the fiber with the larger inner diameter hole so thinner ring fiber , if using all full sized fibers no judder spring needed and clutch bolts get torqued to 5-7 ft lb , very easy to over tighten and mess something up
Another good way to flush is pull ur lower hose and flush it with water with abt 10% degreaser then run it for a few minutes drain and flush again with just water run a few minutes drain then refill with preferred antifreeze
@@StroDshiesty1 thanks for the tips I had no idea they made that ! I’m gonna be re doing the whole motor in this quad so I’ll be sure to pick some up when it’s up and running !
Can you tell me where you ordered the carb rebuild kit for your 500 Polaris Scrambler? Mine is a 2004 4x4. Mine has oily-looking gas in the airbox, and is hard to start.
I just got it off eBay for like 15$ if I remember right ! But I did buy the float separate off eBay too. Mine had a similar problem of gas coming out of the air filter !
@@GoingGh0st not using the hand,e I get, particularly if there really is t enough room if you put it between two other stationary objects. But to me, and I suspect most others, removing the names seems a bit extreme. But these are yours so you can do whatever you want with them.
@@melgross Exactly what applies to you, Nobody Nobody asked you in the first place, you are the one that came to criticize what he did to HIS box so please STFU and mind your business.
Hey, i just bought the same cart in gray. The workers helped me put it in the back of my suv on its side in the box. Do you know the best way to get this thing out of my car ?
1:52 the pliers are NWS pliers and so those are nade in Germany as are most NWS pliers..But the Sonic Tools aren't made in Germany..Mostly nade in Taiwan with certain tools nade in Germany and Czech Republic Personally I feel they're overpriced for what they are. You can get the fame quality for half the price from Gearwrench and Tekton and similar level tools
I own a few sonic tools and dude They’re the best for the price!! When Chrisfix introduced them on his channel I was stoked to buy one day. Definitely looking to buy more down the road too 😊
I just got mine out of the dumpster behind Harbor freight, the one by me throws away alot of scratch and dents this one I got was dented at the top lid pretty bad it took me a while to get it fixed back up but I wasn't really interested in closing the lid. But for free you can't beat it. Sooner or later I'm sure i'll get another one and just replace the lid
I have had mine for about a year. I'm just a weekend warrior, do car repairs at home. I roll mine out into the driveway sometimes and had no issues. It has been a great box so far.
i have a 03 scrambledoo 500 carb leaks from what looks like to be the fuel drain. i want to see if i can get away with taking out the airbox and pulling the carb out. ill see if it works
Same thing happened to me on my YFZ. As soon as you turn the fuel on it’s a constant leak. Check the float to make sure there’s no gas in it and it floats, if that’s fine it’s probably the float needle or bowl that’s not shutting the gas off
@@GoingGh0st i cleaned it yesterday i think there was dirt making it not screw in all the way. and it didnt leak for the rest of the day i checked on it this morning and right back to leaking
Have you removed the axle at all? I had trouble with the roll pin on the inner side of the axle shaft to replace. Could have been me punching it the wrong way but i never was able to fully remove and replace. Im doing spark plug soon, getting a bit of backfire hoping thats it. Keep videos coming i have same machine
Watch the second half of this video and I explain how to take the rear axle out I did it to replace the disc ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JzFDLBHzhk4.htmlsi=yQ_Rqt2RyYQhWU2o Also watch my first video on jetting it sounds like yours might be running lean if it’s backfiring I showed a jetting chart in it
Did you replace the float needle ?? The carbs not shutting the gas off so it’s coming out the over flow basically so replace the float needle and possibly the bowl it goes in and that should stop it
@@wmack7283 if you look at the tip it should be pointy and still rubbery not dry but sometimes the ones in carb kits don’t fit properly and cause that. Same thing happened on my yfz I replaced it with a new one and it wouldn’t seal so try putting the old on back in and see if it leaks if it still does I’d remove the bowl it sits in and order a new one with a new needle possibly