Welcome to my channel, here is where we have videos from tech, gaming, streaming peripherals, and much more. If you like what you see please subscribe.
i have both those spidey comics the one you framed is signed by mark bagley the artist and will be signed by one of the authora terry kavanugh in Dec along with the green web of Spidey bc he is the author of that one 2
They make wall frames from the same company that makes bags and Boards but you can't put a bag and board in it. Another company makes it where u can put a bag n board in it too
hey, so after seeing your comment i tested it around on my PS5 and i got it to work however not without issue. So for me when i used a USB C to USB A cable (the included one and other ones i had) the sound of the mic was all distorted. I tired the USB on the front and the rear of the PS5 but same issues with the distortion. BUT when i use a USBC to USBC cable and connected to the front USBC slot of the ps5 the sound worked just fine. To get the PS5 to switch to the AM8T you need to go to settings -> Sound -> Microphone and change the input device to the Fifine mic. It should change automatically. You can also hear the mic levels going to the adjust microphone level tab and that is where you can hear how the mic sounds. Keep in mind to be able to hear the mic you need to unmute the mic by pressing the mic button on the controller. In my experience when i connected the mic it also changed the audio output to the mic. So if you want to keep the sound coming out your tv you need to change the audio output back to HDMI device but if you want to use the headphone monitoring on the mic you can keep it on the fifine mic and connect headphones to the bottom of the mic and control the volume using the knob. I hope this all helps.
I would like to say a big thank you to this channel and the producer of this video. I was about to go crazy with this EOS M50 Mark II. Thanks to this video I didn't throw it at the wall and destroy it! You gained a subscriber. Thank you very much...... From the bottom of my heart very grateful. Big arm from me, Mr Marcelo Mello and from the @TUDOENSINO channel.
Hi! How durable are these pc keycaps? Are the characters/surface on them still intact or there are some sings of wearing down? (I only use PBT keycaps.)
Thanks for watching! As long as you don't have your RGB bright you'll be able to see the key legends at night. If you have your brightness settings on your RGB you might have hard time reading the keys.
I am only 6 years late to the party! thank you so much for making this video!!!! I've watched soooooooo many RU-vidrs trying to explain this and YOU are the one who did it the best because I FINALLY connected my camera. Thank you!
Yes, it should come with all the keys you'll need for your 65% keyboard. the only thing I will like to mention is it comes only with a 6.25u spacebar so if you need something bigger or smaller you'll have to look at a different set. 6.25u is pretty common size so you might be fine.
This looks like a great alternative for those Akko black transparent keycaps in that they seem to include ISO keys (eg Enter) that Akko's lack and even has a raised notch on the F and J keys which is great for touch typists while keeping the overall design/feel. I'd love to see a apples to apples comparison to see if they match it in looks.
it's a great video, and very informative. Do you have any advice about the little delay on OBS when using method one? Do you have a specific kind of micro USB?
Thank you! This video is kinda old now, Canon has released a much better way to use your camera as a webcam in OBS. It is called Canon Webcam utility which is the better way. With this utility you just use a USB to your camera and connect in OBS using the Canon Webcam utility in the drop down of the video sources. If you still having delay issue, at least with my experience with EOS R, if i use face tracking or eye track AF it causes delay. i use either single point or the large box AF. I hope this helps.
Hey, thanks for watching! So few cons with these after using them for sometime now are that they're finger print magnets so you'll have to wipe them down. Another thing is if you have sweaty hands/fingers your figure might slip off the key if you're gaming. If you have an RGB keyboard and you have the LED brightness high its hard to see the characters on the keycaps. I still do recommend them, but those are just 3 things to consider to be possible deal breakers for you.
I agree, you have been lacking on uploading but as one of your real ones, i understand that you have family and your own things. I dropped you a follow on Twitch! I hope to catch you live soon!
I'm not a big fan of Resident Evil but this is a nice collection. I remember playing the RE game on Gameboy as kid. looking forward to the next video Big Dogg!
does the R2R in LegendGary R2R stand for "Rags 2 Riches"? Very cool vid man, you're a beast with Kano. I'm looking forward to next Mortal Kombat Online Matches.
I was just wondering if there was a technique that you used to get them from sliding down meaning you put the comic whole booklet in the center of the frame and then I wanted to know if it was going to stay in the center because of the weight of it?? But you didn’t use anything except for that one you have the backing on it and you have it in a bag
With keeping it from moving in the frame once you place the comic and add the back portion to seal it, with the thickness of the comic and the pressure from sealing the frame it kept the comic in place. I would image most comics would be thick enough to stay in place. If you have any issues keeping it place, you can probably use a small piece of scotch tape folded and add to the back of the comic to keep it in place. Hope this helped. Thanks for watching
