I do not have PAS after installing the 35A KT controller onto a Radrunner 2. The factory PAS wired are Red White Black. The controller wires for PAS are Black Brown Yellow. Does anyone know which goes to which? Also my bike hall sensor has 6 wires but the controller only has 5. I have a white wire left. What do I connect it to?
For drivers in my opinion are the best they are the best controllers and most easiest to program to get your system running together and talking him together as one no matter what you have great content.
Do you know what size the battery wires are ? Im ordering the 120p watt voilamart kit. They said its a 2.5 mm bullet but from what ive seen most are 4 mm. Arent they? I think regular mp3 headphones are 3.5 i can see my 48 v 1000watt 25ah battery going through a 2.5mm maybe im wrong
Please, help: I connected my hub motor to a 60A controller of voltage range 48-72v. But the motor will not spin at 48v (and the motor is rated 48v), until at around 64v then it will spin slowly. Anyone with tips on what to do?
are there cables adapters for this to put this on waterproof julet connectors ? and display - nc81f ? or are there adapter cables for the fardriver? to julet waterproofed cable?
Awesome video man! Got a ? if you don't mind. I have the ienyrid es10 2000w 48v electric scooter with dual 1000w brushless motors and I'm needing to replace the controller. Do you know what type I would work? there's so many different options!😬
this helped me a lot!! thank you. my only issue is that my bike gets top speed 10mph and then shuts down. any help here? southern california, went from 36v to 48v (like originally should be)
Hi, my name is Sam. I recently purchased electric bicycle 60 volt 1500 watt motor, 26 inch fat tire. My first right didn't go so well after riding for 5 miles when I stopt the bicycle starts moving on its own Without me touching throttle. I was losing also pedal assistant when I was driving. There is no sensors for Pedal assistant it works different way. The bicycle was also increasing speed without me controlling speed I didn't touch the throttle and I wasn't pedaling. Since the owners of the company are located in Chicago, they picked the bicycle after I report the problem. But they are telling me that they cannot find any issue with the bicycle. I present them three different videos with the problem. After I did my research including watching your video I realize that controller is responsible for all the problems that I was having with the bicycle riding for the first time. Any tots, what could possibly happen or what is happening? Thank you. Sam
To reverse a brush less motor, swap over any 2 of the 3 power / phase wires. This trick is used in model aircraft. My problem is connecting the display screen, the wires match the 5 signal wires from the motor but I don't have anything to connect to? This is not complicated and I'm not dumb but I'm really puzzled by not being able to see the correct wires. I have 2 controller boxes, 2 displays and one wheel. 😂
Whats the problem, you can't turn it on at all. Battery is new and checks out with good voltage, on, not hooked up . Hook it up to the controller, turn on the battery, The battery makes a sound like it turns the battery off, maybe?. Press the button that tells you how much battery you got left. Doesn't even lights up one bar. Like it's completely dead. Turn off the battery, unhook the battery from the bike and it works great. Voltage is good and all the battery lights light up. Is the problem in the controller? Its a e-bike kit. Says it's 3,000 to 5,000 watts hub. Says it works on 48v 60v and 72v. It's a sine wave 100a controller, Battery is 48v. What do you thinks wrong?
So my problem is definitely the battery. Ecotric Seagull that won't power on. It has a tail light built in that works and it took a charge, just the red n black don't pop, it does when I hook my diy battery to it. I think it works but the connection is busted internally. Time for disassembly I guess.
You make it look very easy. There is a ton of ebikes here in the Netherlands all with proprietary batteries. All the hardware is good except for the bms and controller. This is the way to keep them running.
I'm trying to convert my whole ebike system to an electric motor from an e scooter but the motor is brushed and only a red and black wire. how or is it possible to do that?
This is the most confusing thing ever sometimes blue sometimes white sometimes it grey sometimes it's this sometimes it's that ,,, you have to make sure your motor has the right connections to even go to this damn thing even the controller..
it could depend on your controllers features, 0 power setting by default will not allow throttle input so do you have a display that allows power settings?
Hi, like your video. really recommend you to have a look our ubox , it's based on vesc, most popular scooter ebike controller in community , it's more flexible and highly programmable for personaized feature you want. for example,you can set motor current , brake current battery current every small details you want to get, it's suuuuuper flexible and interesting!
I added a tail/head/turn signal kit to my eBike conversion. I have everything plugged in except for power. There is a molex with a red and black coming from the controller. From the light kit there is a small molex with a yellow and black wire. I want to change the molex on the controller and the light kit to match and then plug them in. Question is, are these indeed the power wires and how would I match up the controller red/black to the light kit yellow/black? I have a voltmeter but not sure how to check voltage.
