@@ravithephotog don't bet on it just yet, a few stars need to align, but my video creation phase will start sooner rather than later. It will be great.
Hello, I just got my Orlit RT-601 and TR-Q6 Trigger for Fujifilm. I shoot with the Fuji GFX50R. The issues I am coming across are listed below. 1. The High speed sync stays on when the trigger is attached to the camera and will not change ever on the trigger to another sync setting like rear curtain or normal. 2. The High Speed Sync only goes to a minimum of 4.0 on the light and not 1.0. 3. You can set the light to normal sync and 1.0 output but once the trigger goes on the camera and the camera is set higher than 125x it resets the light to 4.0 high speed sync. Please let me know you thoughts.
Hello, I just got my Orlit RT-601 and TR-Q6 Trigger for Fujifilm. I shoot with the Fuji GFX50R. The issues I am coming across are listed below. 1. The High speed sync stays on when the trigger is attached to the camera and will not change ever on the trigger to another sync setting like rear curtain or normal. 2. The High Speed Sync only goes to a minimum of 4.0 on the light and not 1.0. 3. You can set the light to normal sync and 1.0 output but once the trigger goes on the camera and the camera is set higher than 125x it resets the light to 4.0 high speed sync. Please let me know you thoughts.
Hi there 1. I have not played around with Fujifilm cameras but what I can tell about sync setting is available inside you camera settings. 2. Yes once you have HSS enabled the Rovelight will only go to 4.0 as the lowest power long press the sync button on your TR-Q6 trigger and navigate to HSS off and most importantly have your camera shutter speed set to lower than normal sync limit then you'll have 1.0 power on the strobe. 3. Press and hold sync to switch off HSS on the TR-Q6.
