“The Hydro Innovations mission is to provide our customers with the very best and most innovative pump solutions, using the highest quality products, and supported by the best service in the industry.”
We are leaders in Self Priming Centrifugal Wastewater Pump Technology. Hydro Innovations is the exclusive distributor of Gorman-Rupp (USA) pumps in Australia. Gorman-Rupp are the world leaders in self priming centrifugal wastewater pump technology, however they also manufacture the best fuel pumps, gear pumps, prime assisted pumps and packaged pump stations.
I can't help but wonder if those check valves are gonna rattle and break off due to vibration when you consider that centrifugal pumps don't give an exactly constant flow. and furthermore how thus this vibration affect the cut water of each pump. looks like a mess
The check valves will not rattle, they will behave like any other non-return valve in a piping system. We have had systems operating for over a decade with absolutely zero issues with check valves or anything else in the system. The cutwater is normally only effected by cavitation, errosion or corrosion, so its condition would be effected by water quality and the operational parameters. Pump application engineers need to do their job properly. The piping system may look complicated, but it is extremely effective when dealing with long or small rising mains or when multiple pump stations operate on the same rising main.
It will be the same either way.. Since the flow is the same through both pumps, you are left only with the head for each pump at that rate. To calculate head at the series rate you add the head for each pump. Since when adding numbers it dosent matter which is first and second, it dosent matter which pump is first. In fact it is easy to plot a new head vs flow characteristic for the series set up by adding the value of head from each pump for all flow rates.
