@@ArthurSchoppenweghauer Right on!

@@monkeyface666 Thanks

Thanks

Thanks for keeping up!

Thank you

@@DeathMetalManiac1988🗿 sigma ohio rizz

@@GallonOfBlackTooth Thanks

@@GallonOfBlackTooth AMT M2 preamp with bass at 9 o' clock, mids at zero, treble at 13 o' clock, max gain. Boosted by a Boss MT-2 with zero gain, full volume level, bass, mids, treble at 12 o' clock. Mesa V30 as an IR.

Question, what exactly would the settings be like on a crate gx-15 amp with that setup you have?​@@DeathMetalManiac1988

@@Anndre_ Very similar settings I think. Main part is to scoop the mids and crank up the distortion. Maybe the crank does not need a boost at all. At least my Crate GX-130C does not need one and still has room for gain.

@@Dogmatikos Thanks, apparently a Marshall JCM 800 on this album.

@@DeathMetalManiac1988 and a metalzone? line6?

@@Dogmatikos I think they boosted it for sure. I used a Boss Metal Zone as a boost into the AMT M2 preamp.

@@DeathMetalManiac1988 nice!

@@caosedeus5066 Thanks a lot!

@@Goretesque Thanks

That is awesome, my friend!

Yep, an awesome amp for sure!

Thank you

Thank you

Thanks a lot! Basically it was a AMT P2 preamp (no boost) and a V30 IR. Post EQ is very critical as well.

Thanks a lot for the nice words, man. Nice to read that it helps you transcribing the song. I tabbed out the whole song as well but there are minor parts I'm not sure about. You'll finish it I'm sure \m/

@@DeathMetalManiac1988 Hey thanks I ended up finishing the tab. If you'd like to compare anything with yours, I've uploaded it to UG and Songsterr. I also just uploaded one for "Swallowed by the Ocean's Tide" :)

@@hypercatjam Awesome, I'll check it out :)

Thanks a lot :)

Yeah, but they have songs with solos as well :)

Please read my replies down below. Cheers

@@DeathMetalManiac1988i read all

Basically you have to use the Marshall 8100, gain to the max with slight overdrive. Cut the mids really hard, highs around 1 o' clock and bass around 10 o' clock. IR is critical as well, you can use any IR to your taste basically.

@@DeathMetalManiac1988thanks ill try it out

Thanks

Thank you

Thanks a lot! I've used the E2 preamp by AMT - awesome sounding peace of gear. As for guitars, BC Rich Stealth with Dimarzio X2N as a humbucker. Behringer UMC404 HD as interface and Reaper DAW.

Glad you like it 🤘

Thanks a lot!

You sir deserve so much MORRR Whit that Beavis n Butthead picc

@@loredanamassini9484?

Thanks, yes, I'll try another one later this year with less mids \m/

Thank you very much

Oh thanks, man! It was a Behringer HM300 pedal into a Digitech GNX2 with the Marshall preamp and cab. Really low gain on the GNX2, high gain on the HM300. Then straight into the audio interface and post eq.

Thank you very much for the comment and for checking out the video!

Thanks a lot for subscribing, man!

Thanks a lot!

Thanks for the positive feedback, man! I did many takes before being satisfied.

Thanks a lot, man! I appreciate the positive feedback for sure. Cheers!

Thanks a lot! It was a EMG 81-7 loaded guitar --> Boss MT-2 Keeley Mod --> Boss NS-2 --> AMT R/S Bricks Preamp --> AMT CP 100 (Mesa V30 + SM57 IR) --> Behringer UMC404HD --> Reaper. Of course post EQ work as well in Reaper. Cheers.

@@DeathMetalManiac1988 very nice! So brutal. Thinking of getting an MT-2 as well, do you know if it pairs well with a marshall 8100?

@@toptentechtipsthingsricegu8822 Yes, it works very well with the 8100 as a dry boost.

@@DeathMetalManiac1988 Sweet, thanks!

@@DeathMetalManiac1988 So you got this tone basically with the Metalzone only? Awesome.

Thanks, man! It was EMG 81/7 loaded guitar --> Boss SD-1 --> Boss NS-2 --> Marshall Valvestate 8100 Input --> Preamp Section Out --> AMT CP 100 (Mesa V30 + SM57 IR) --> Behringer UMC404HD --> Reaper. Of course post EQ work as well in Reaper. Cheers.

Nice! Did you end up doing much eq in post?

@@aheadofmetal Basic stuff like high pass at 100 Hz and low pass at 7k, also a dip at 4k to cut off some dirty hiss. But you have to scoop the amp really hard in before hand to get into the right area. Also the position of the mic seems to play a huge role, I think. Or in my case the IR. I'm generally really suprised how scooped some of the tones of metal bands are - it's crazy haha. But it works in the right context it seems.

It depends. Is there any information, what gear they used for that album?

​@@DeathMetalManiac1988i wish haha!! Im thinking probably a JCM 800 with a distortion pedal in front, but i have no clue really, sorry

Thanks a lot, really!

Thanks, man! I appreciate the feedback.

Thanks, man! I try to use equipment close to the original, like in this case, a boosted Crate GX130C, to get the same gain structure going on. I use most of the time an V30 IR on the tracks, since it's the speaker a lot of bands use. Then I tweak the amp by listening to the original track and apply an EQ (critical) in the DAW. That's about it.

Thanks for the comment. Yes, I was thinking about tweaking the EQ more in this area but left it as it was. High pass, low pass and a dip around 4k.

@@DeathMetalManiac1988 killer!

@@DeathMetalManiac1988 It sounds great! What frequencies are you high and low passing at?

Thanks a lot! High pass at 100 Hz and low pass around 7k.