Тёмный
Instyle LED
Instyle LED
Instyle LED
Подписаться
InStyle LED

- Bespoke LED Strip Lighting Specialists -

Call : 01162799083
Email : Sales@instyleled.co.uk
Whatsapp : 07933930342
www.Instyleled.co.uk

- Offering over 30 years of combined specialised experience in the LED lighting sector- InStyle LED has been providing best in class support and service to the UK lighting industry.

- From our Leicestershire factory, we design and manufacture commercial grade products for the LED lighting Industry - everything from control gear and drivers, market-leading strip lights, to wall-washers and profiles with next day delivery.

LED Extrusions - up close
0:14
3 года назад
LED Receivers - up close
0:14
3 года назад
LED Controllers & Dimmers - up close
0:14
3 года назад
LED Strips - up close
0:21
3 года назад
Комментарии
@rivassoneira7242
@rivassoneira7242 9 дней назад
and what about flickering or dimmeable feature?
@lydievoznickapaulikova7610
@lydievoznickapaulikova7610 9 дней назад
Cheap and fragile products made in Japan ? They see a gap in the market ,rush to meet demands while fighting with cheaper models 🙄 . I thought we invented the light bulb 😂… but I do love Japanese products 🫶🏾
@X.CuteCats.X
@X.CuteCats.X 9 дней назад
Thank you so much i was crying and i was so sad cuz i spent so much on them and half of them broke amd when i found ur video i fixed it so thank you so much 😊😊❤
@scaryfiqqe9757
@scaryfiqqe9757 21 день назад
my best friend broke them but I didn’t wanted to get mad at them so I’m stuck alone with broken led lights help
@TheOnlyNagiSeishiro
@TheOnlyNagiSeishiro Месяц назад
Thx a lot bro 4 years later and your stuff helps out a lot still thx bro
@verysussyman7209
@verysussyman7209 Месяц назад
Hey so my LED light strips are 24v and I’m using a 24v power box to plug the strip in but after a few minutes they LED strip will start to flash and they won’t change color or stop until I unplug them and I heard i could be overloading the power box but it’s 24v just like the LED says what am I doing wrong?
@nigeltonge5423
@nigeltonge5423 Месяц назад
Hi I’ve had a 5 metre standard RGB+1 extra terminal with an arrow symbol and had no problems even though I’ve made one right angle joint and a straight joint piece but all of a sudden they’re pulsing/ flashing ?? Not sure if the transformer/controller is faulty ? Or dodgy connections in the connectors I’ve installed ( in a bathroom so subject to moisture ) ? Thanks
@RelatableGary
@RelatableGary Месяц назад
Where did u get that piece from
@yyy_youtube
@yyy_youtube Месяц назад
How do i get another strip of led lights to attach where the faulty part was
@dannygarden464
@dannygarden464 2 месяца назад
Nice short video pack with good info, thanks.
@michaelwalker1621
@michaelwalker1621 2 месяца назад
Do you answer your comment?
@souviksen3419
@souviksen3419 2 месяца назад
Sir, you are actually a lifesaver! Thank you so much for this information.
@colton353
@colton353 2 месяца назад
I tried taking part of mine down to give a more chill vibe but the whole strip turned off and it won’t turn on because I think I ripped one of the wires
@bradsanders407
@bradsanders407 2 месяца назад
Uhhhh... maybe next time spend a lil more time explaining how to solder. Did you not use flux? What type of solder wire did you use? What the hell does dry soldering mean? And how is it different from wet soldering? People who watch a video entitled "how to solder blah blah blah" probably dont know how to solder blah blah blah.
@leafjerky
@leafjerky 2 месяца назад
this is perfect for removing the shitty adhesive that come with these, thanks
@Geees1
@Geees1 2 месяца назад
Give me a led light that I can actually cut through @Instyle LED recommend us a set
@meganphelps3582
@meganphelps3582 2 месяца назад
Thank you!!!!
@Essie-child_of_God
@Essie-child_of_God 3 месяца назад
I had got some baybetter led lights and I cut along the very first copper dotted line and none of them will turn on now how do I fix it ?
@Starcharmed.co_
@Starcharmed.co_ 3 месяца назад
What LED’s did he get !? I wasted so much money. The first time I cut them, I didn’t do it right, so I bought another box and cut it RIGHT ON THE COPPER AND IT STILL DIDNT WORK 😭 now I have to buy yet another $50 box of LED’s to finish my room 😒
@Jpetersson
@Jpetersson 3 месяца назад
Don´t say mumfs, say months!
@Mshighlyfavoured
@Mshighlyfavoured 4 месяца назад
can you tell by looking at a blown out bulb whether its cool white, warm white or daylight. its written 4000k but not sure to buy warm, cool or daylight
@Mshighlyfavoured
@Mshighlyfavoured 4 месяца назад
the main question now is: is there 2700k 3000k in cool white or daylight. no one is addressing this. does that mean the lower you go the amber. is the lowest kelvin warm white.
@Mshighlyfavoured
@Mshighlyfavoured 4 месяца назад
do u mean checking old bulbs?
@aderitosantos1695
@aderitosantos1695 4 месяца назад
Thats right,i hate 12v leds projects, very expensive, good for cars, bad for house😅
@cuzimcurly1850
@cuzimcurly1850 4 месяца назад
What if the lights turn on but after a few minutes the turn off completely before turning back on again. This cycle repeats
@yonaelkifle3553
@yonaelkifle3553 4 месяца назад
I'm facing the same thing but but it happened with no contact at all like no paint nor silicon what's the reason for that n how can I fix
@sirkildalot8409
@sirkildalot8409 4 месяца назад
Just received mine today. Was expecting it to have a lead to connect to the power outlet? Now I need to work out how to wire it to the power. No instructions?
@Chiibabyyy
@Chiibabyyy 4 месяца назад
Hi, I just bought my LED lights and they were working fine but when I woke up the next morning they weren’t on anymore and I tried switching off and disconnecting it but it doesn’t turn on. Tho when I touch the metal tiny dots for colour on the strip, the light in that area comes on with that colour and when I stop touching it the light goes off
@Chiibabyyy
@Chiibabyyy 4 месяца назад
Idk if it’s because I cut it to shorten it (on the manual, it says I can cut it and there’s a scissor drawing on the copper part)
@merlyn54
@merlyn54 5 месяцев назад
do the LED strips need to be 8 bit or 16 bit compatible? or is the added accuracy of a 16 bit controller able to be interpreted by all LED strips
@vikxz1125
@vikxz1125 5 месяцев назад
wow i wish i knew this before wrapping my lights around nails on my wall thinking i got ripped off
@JeMasLT
@JeMasLT 5 месяцев назад
It is usefull
@djfrankyuntouchable
@djfrankyuntouchable 5 месяцев назад
Where can I purchase this
@LikelyLagging
@LikelyLagging 6 месяцев назад
Any way to fix a strip torn in the middle of a cut point?
@viba882
@viba882 6 месяцев назад
Nice
@user-yu2er9ej7w
@user-yu2er9ej7w 6 месяцев назад
W Video actually answered my only question about these
@lorene.zackery7395
@lorene.zackery7395 6 месяцев назад
My led light thick rope
@lorene.zackery7395
@lorene.zackery7395 6 месяцев назад
Who repair led lights
@koketsojonathan8343
@koketsojonathan8343 7 месяцев назад
i cut mine in the first part on the plugging point 😢😢🤦‍♀🤦‍♀
@lazarmarkovic3562
@lazarmarkovic3562 7 месяцев назад
BRO HOW THE FUCK DO YOU PEEL THAT OF I CANT
@Adam-vl8dj
@Adam-vl8dj 5 месяцев назад
Same 😢
@digimurtal
@digimurtal 7 месяцев назад
Badically the powersupply sucks and seems dangwrous, has happened to me twice now with my strip- the strip is fine but as soon as i put a couple of more strips on it stars ancting up, I guess theyre made to break within 2 years
@InstyleLED
@InstyleLED 7 месяцев назад
The power supply will flash if it is overloaded (there is more wattage of LED connected than it is rated for) we allow for a 10% headroom as this will help keep the power supplies running efficiently for 5 years of continuous use.
@SBArtist
@SBArtist 7 месяцев назад
What if you strip turns on as you are trying to plug it in but once the usb is plugged in all the way the strip doesnt come on
@InstyleLED
@InstyleLED 7 месяцев назад
If they are only coming in for a split second it sounds like it might be static causing the lights to turn on, once you have connected them the usb isn’t powerful enough to power the lights.
@Countryballl_isOP
@Countryballl_isOP 7 месяцев назад
Lifesaver
@spyrofrost9158
@spyrofrost9158 7 месяцев назад
Man what a garbage product. Its easier to take the adhesive off altogether than it is just to uncover it
@el_desalmado
@el_desalmado 8 месяцев назад
I have that problem but the strange thing is that I was using it normally and one day I turned it off via controller and like half an hour later i tried to turn them on again and this would happen. Also now it wont turn off via controller, just unplugging it. Anyone has a solution for this?
@user-nn7dg2zp4r
@user-nn7dg2zp4r 8 месяцев назад
Replaced my LED strip lights after the old ones went dead with the same brand and (seemingly) the same model. Because I thought everything was the same, I didn’t bother replacing the power adapter and was so stumped when only the red lights were working and it seemed super dim. THANK YOU SO MUCH FOR THIS VIDEO AND FOR SOLVING MY PROBLEM, YOU ARE A HERO AND A SAINT
@vadimnesen8060
@vadimnesen8060 8 месяцев назад
Do they burn out one by one or do they dim as well? Like burn out and get less bright..?
@InstyleLED
@InstyleLED 7 месяцев назад
They will get extremely hot and burn out randomly, you will get random sections fail to turn on as they burn out, they will get extremely bright and hot first.
@akashdipdas2367
@akashdipdas2367 8 месяцев назад
But is it safe to connect a 8v adapter to a 12v led strip?
@InstyleLED
@InstyleLED 7 месяцев назад
A 8v power supply wouldn’t power 12v LED, it’s not advised to connect anything but the matching voltage to the led strip.
@benjaminmartinussen2388
@benjaminmartinussen2388 8 месяцев назад
how did you got the eged of the cover cut in 45 degres?
@InstyleLED
@InstyleLED 7 месяцев назад
We use miter shears, they are readily available for less then £20 on Amazon and make precise clean cuts of the lens covers.
@neykodimov2786
@neykodimov2786 8 месяцев назад
Great video! To the point and very informative