this channel is all about tech, reviews and tips to make tech works for you! more and more this channel becomes a home automation channel though because these automation techs are not going away. thanks for watching a subscribing to my channel!
This is awesome! This will boost my productivity. I have been looking for a solution to my problem of watching a tutorial in full screen, pausing the video, & following along. But pausing/playing the video will cause the video to overlay the program window I am working on. But now, I can use the deskpin to keep the window on top of the video even when i press pause/play on the fullscreen video! Thank you!
I printed a similar thing, to stop it sliding i used hook and loop velcro tape but just the hook side works perfectly and it does not slide or ruin the fabric, i have a s23u with case and its heavy no problems
1:16 Hi, great video with clear and concise language. I've subscribed to your channel. Two questions: (1)- Will it work with the Canadian 2024 Hyundai Tucson ICE (non hybrid) with push-button start? (2)- If I buy two of these one replacing the ignition relay and the second replacing the fuel pump relay, can I use one remote to control both simultaneously? Thank you.
I have ended at MQTT binding in HA, I do not see any RTL_433 device under MQTT - any advice please? In the 433 (not next!) i see the discovered sensors... with 433 (next) i see error only
Good Video , you mean Titanium Dioxide TiO2 . The differences in shading could be from the tile being on a slope and the laser being different distances from the work or the thickness of the paint varying , you might be left handed and getting more paint on the LH side of the work with your spray technique ?
hi, thanks for the awesome tutorial! however i was just wondering does it affect the Tire Pressure Monitoring System in the speedometer? here in Indonesia most of the tire shops do not recommend (or they simply just don't understand) to rotate Ioniq 5 tires because it could affect some TPMS error in the speedometer. also, i did some wheel alignments because the steering kept running to the left and the mechanic suggested to change camber nuts to enhance more adjustments. looking forward to your reply! thank you!
it does not affect the Tire Pressure Monitoring System. also, you do not need to re-balance the tires....assuming the tires were already balanced before you rotate.
What can i do if the leared ir signal is not accepted by my device. I also tried the switchbot universal renote hub and it didn't work either. It's just a basic remote for a gas heater with on off up and down.
Good and helpful video. No hype, exaggeration, sales pitches to like, subscribe, etc. tedious intro videos, branding, etc. ‘Matter of fact presentation; just what many people need to know for their install. Clever idea on the NFC!
Are you sure this works fully locally? I believe that even though your audio file is local, the API to send an announcement to the speaker is on Google's servers. Have you tested this setup on a LAN with no internet?
yes. on my PFsense router, i assigned a static ip for the Mini and blocked from ever getting online. once done, asking Google for anything does not work. BUT HA still treats the Mini as a local speaker to play local MP3 files
Terrible design, never buying again, garbage, to get to my water shut off, I had to remove vanity drawers, kinda of a pain, I had to eventually cut some wood, and a plumber helped, he said never buy this, it was inherited by former owner. So, $350 later, new Mohen Faucet, and plug still doesn't work.
Hello, I've been solving a problem with Annke's support for a year now. I alerted them to the insufficient value of the record. New firmwares have a minimum value of 30 seconds, which is bad and nobody wants to deal with it. Another problem is with the sensitivity, even if I set the value to the minimum value of 20, it almost constantly uploads. The problem is both NVR and specific cameras....again, no one solves it for at least a year..... ONVIF camera support, picture, sound goes but does not record. ... again, Annke doesn't want to solve anything. The old firmware worked fine. No one can help with support, they just copy the same text over and over. ANNKE is a disastrous company that rebrands an unnamed company. The unnamed company is at least reacting in some way, which cannot be said about Annke. I've been installing this brand for years and I'm leaving for the amateurish approach.
I put two of these twin burner ones in the last house I did, bought them of Amazon and was shocked how good they were, excellent value for money, I managed to get each for $120-180 They require a little bit of care to cook with The buzzing is normal that's because of how the induction cooking process, what you're hearing is the magnetic coils the super expensive models aren't all that much better but more refined if that makes sense
Great video tutorial, however, you seemed to have skipped on how to get the Token and Key from the Midea unit to populate in the bottom of the Home Assistant New Appliance input screen. Do know how to get these credentials, I have looked in the SmartHome App and not been able to find them.
i can confirm playing MP3 files work 100% locally. in the router, i blocked the Mini from the internet. afterward, it does not work any more when asking Google.
I've found Home Minis on FB Marketplace, Craigslist and in local thrift stores. The most I've paid is $15, but I've gotten a few as low as $8. One thing about buying used its that you need to reset the device before you try to connect to it on the Google Home app or it will fail. Sadly, the devices chime when you are trying to play a media file and you can't turn that off. One way people have gotten around it is to mute the device the first few seconds of playing your file.
In the future, please don't allow the audio portion when you say "Hey Google" as you're demonstrating. Say something like "Hey G" or mute the portion where you say "Hey xxx". You set off my Google mini speakers to start playing music on my TV and it cut off your RU-vid video. Other content creators typically mute the audio portion where they say the word Google. Keep up the great tutorials and have a nice day!
I am currently solving several problems with the "manufacturer" ANNKE, which they have with their products, including safety, and I was very disappointed by this brand, with the fact that no one wants to solve the problems in order to fix everything. I used to be happy with the brand, but the last year has been a disaster. If anyone wants, I can send the history of communication and reluctance to solve several problems that the ANNKE brand has. They have been corresponding with ANNKE for a year and they keep writing me back with the same answers that lead nowhere. I do not recommend working with this brand at all. It's just a bunch rebranding another brand. Then there are a few monkeys and they will solve absolutely nothing on the call center and emails. Huge disappointment of the ANNKE brand!!
Very informative. I have not been able to find out if the conf file is required. Also, a little confused about the setup of it with the "next" version coming from the prior. The part that starts here. s[/type][/model][/subtype][/channel][/id],events=rtl_433/9b13b3f4-rtl433/events,states=rtl_433/9b13b3f4-rtl433/states. What model, subtype, channel, ets. How is this setup? Any idea what the difference is with it/without?
