Sweet Project Cars Uploads 2 videos per week for the DIY type person. We share money-saving tips and tricks about cars and trucks. Tips that will not only save you money but keep your ride looking sweet all year long. We love helping as many people as we can. We have been working on vehicles for almost 40 years. Also As an Amazon Associate, we earn from Qualifying Purchases.
If you could Donate to our channel we would appreciate it www.paypal.me/YourSweetProjectCars
2 year old ink in carpet from a dog thinking a pen was a chew toy. I tried getting it out two years ago, but it just smeared it, nothing worked...until this. It took about 5-6 times and my mini Bissel and I let is sit for 10 minutes...the dabbing didnt get it all out. Now the highlight marking, didn't work as well, but still got it much duller.
you could NOT BE MORE WRONG Frank! Laq thinner has been used on clear coated auto paint for years and years x 10 it has no effect on it and is one of the best cleaners for clear coat...Mad Mike
Why is the process different when using the welder? You have another video using a 200 amp battery charger by zapping for 15 minutes at 200 amps, resting for an hour then zapping again for the same amount of time, etc, for 5 times total (over 5 hours). Here you are using a welder, zapping for 5 minutes, resting 10 minutes, z zapping again for the same amount of time, etc., for 3 times. Why the difference?
I gotta get to my poor jeep I did the old school old oil trick on half and quit now I got a half rusty jeep but I can see this being way better definitely gotta try it
When is it necessary to add electrolyte to the cells. Does the battery actually lose the acid strength over time? I thought distilled water was the only liquid that is needed to replenish the fluid in the cells.
No, the water is the only thing that evaporates. Top off the cells within an inch of the top with this amzn.to/3gb9Ni0 before beginning the process then again during the resting times as needed. Thanks for watching and asking, have a great day. mad Mike & team
I bought the welder and load tester that you recommended. The yellow one. They came yesterday. Hopefully tomorrow I will give it try on my golf cart 6 volt batteries. The batteries have a least one or two low cells. 0.5 volts to 1.5 volts. I hope to bring those cells at least back up to 2.0 volts. The batteries are 3.5 years old. I am going to try and take each battery out of the cart to do this. I don't want battery acid running out onto the shop floor. Beings as they are heavy, I will have to lift them out with a chain fall. Going to be a lot of work.
Have a 1957 150 converting drums to disc. The lower control arms both have a pair of bolts smaller than the the other two? Do you know if this is what is on yours? all 8 are marked 6 times on the heads 4 measures 1" 6/8 and the other 4 measures 2" and 1/8? They appear original or should I replace?
I have longer reliability by using a 200 amp battery charger, cooking the battery 3 times 1/2 hr then empty it out, clean it out with distilled water then put new acid in it them slow charge overnight I usually get a average of 6 years but 3 times max is the life doing this
Awesome! We've had great results with all of our old and new methods of doing this process. Thank you for watching and sharing, have a fantastic week. mad Mike & team
Yes it's the Blue Bomber. It will be like new, and inexpensive repairs because parts for the bomber are cheap!! Thanks for watching and commenting, hope you have a fantastic week my friend. mad Mike & team
LOL, I hear you buddy! Lived in Michigan my whole life until 4 years ago, rust is a horrible problem there! Thanks for watching and commenting, hope you have a fantastic week my friend. mad Mike & team
I dont use a pickle fork anymore because it rips the boot. A good swift knock on the knuckle where the tapered part of the ball joint goes through it comes right out😉
Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at sweetprojectcars@gmail.com with your name and mailing address!!!
Yea, working on non rusty cars is nice, I've had those forks for a few years now and can confirm that they do make the job allot easier than it would otherwise be.
My auto mechanic says that my 2012 BMW 328i has oil leak into the turbo charger, that's the reason I have that smoke. Will your brew work with this problem?
I had new brake shoes, rotors, calipers and RE places the brake line, ratated the tires, one year ago why would cause the mild shaking going down hill pressing the brakes like when the rotors needs to be replaced? Brake booster? 2006 Town and country limited. 🤗
Hey Mad Mike thanks for showing us the tools and procedure for doing a Ball Joint Repair, Planet Safe is some amazing product. I have seen you doing the repairs on the Blue Bomber and you make it look easy with that product. Quick question how do you put planet safe grease in that grease zerk? Can you show use a quick tip video on that. Thanks for all you do and continue to do, I love all your videos that you put out they really help me. 😊
Hello and Good Morning to All our Great Subscribers! This video is to share how to change a lower ball joint and to show that the average Joe can do it with just a couple tools and patience! INNER TIE ROD VIDEO IS NEXT amzn.to/4e3bCvV and we are not being paid to share this! SEE Our New Channel www.youtube.com/@Butinski Quote of the Week! *When everything seems to be going against you, remember that the airplane takes off against the wind, not with it*
I had no idea that this happened to my dashboard or why! I ordered these products and am awaiting them. Hope this works! Should you do it when the car is hot/summertime? Or does it matter?!! Thx!😊
At the end you said “done” and then text popped up saying “You will now grease as you normally do.” Im confused, are you saying to do another process after injecting the grease and sealing the hole with silicone.
My battery has no caps. The area looks to be covered by a single lid over the top half of the battery. I’ve tried to remove this lid. It seems glued on. I’m afraid of breaking it into pieces.
I tried this method with maf sensor on my fiesta st 2014, pulled out the maf sensor and cur still runs. I have system too lean bank 1 code and trying to find a solution. Revs go up when idling around 1600 and then down again