Thank you so much for sharing this. This was the first year since my husband passed and the first year I learned how to use my lawn mower. Thank you so much for your video last weekend. I replaced my deck belt by myself and found it easy. Thank you. I am not afraid anymore to do things myself.

Why in the heck didn’t you show putting that pulley back on with all the washer n spacer you didn’t help me god

Do you have a video on how to lubricate pto "pivot? Pto handle would not move and disconnected cable & spring from pulley bracket and handle moves cable freely. Seems to be friction at bracket pivot through deck. Thanks for help in getting this lubricated.

Metal tubing too expensive? I don’t hate it though. It works! And the wood grain touch is the chefs kiss.

Hey, whatever works I call it being a dad and trying to save the day for your kids. I would just put maybe something over that so that they don’t get splinters.

I was watching your video, I picked up this mower cheap and needed to replace most of the springs and belt, your video helped showed the location and how to install new-belt, and springs which I have. Great job on video I followed it completely worked like a charm. now good to go! thank you very much:)

Thank you

Honestly country music died in the 90's you kids today don't have a clue, so sad thankfully I was Born in 1960 grew up with no cell phones vid games y'all today are the pussiest generation that ever existed sorry but it's the truth

Thank you for the video. I had an issue with a pulley and you helped me with that.

Your awsome that's the kind of video we need ty

Thank you this was extremely helpful

That's happening to me they sound like motorcycles but when I screw it on they got quieter

Nice video. I need to do the exhaust gasket on mine. Did the valve cover gasket last year without removing the heat shield.....I'm sure removing it would have been helpful but it isn't necessary.

So clear! Thx!!

What clip did you use in place of the bowtie clip?

We have Mulch Plug that may fit your lawn tractor. We can provide for free. Do you need?

Show me how to tighten the belt

Thanks for this video man, it helped alot, instead of removing the primary clutch i drilled a 3/4” hole through the plastic cover in order to get to the bolt thats behind it,

What size built isn't because there's no way in hell the 42-inch that I got reaches. It looks like it should be 60 to 80.

Thanks for video. Kohler engines suck. Same valve cover issue too. The vibration it produces and the bolts they use always have a tendency to fall out. I have had to retighten the exhaust bolts several times to ensure the muffler doesn't rattle so loudly. Unfortunately the metal in the pipe finally cracked and broke apart so I debating on just getting a new mower or whatnot.

ltx1042 I replaced the idler pulleys with new ones, and after tightening them, they are not loosely spinning, is that normal?

Dude ya gotta get someone - ANYONE to hold that phone

I had an extra spring when I reinstalled my deck. 😂 Thanks to your video I figured out where it went!

Belt keeps jumping off

Sea sick... helpful though.

Thanks, Jason. Very helpful.

A lot of skipping

At 11:00 minutes you show the 'L' bracket' under the idler pulley, being mounted on top of the main mounting bracket. It should be underneath that mount being held by the bolt that holds everything together. the short side of the 'L' should be touching the deck.

where did you get your valve cover replacement kit? If you don’t mind me asking

Thanks for the video, is there any adjustments to make the belt a little tighter ? I just replaced the same belt with the correct part number ,it's flopping more than it should ,

Why is there no tension on the belt?

You forgot the main tool bud light good video.

It's not a how to clean the deck because we don't want to get dirty its to show you how to save a cuple hundred at ur local rip off shop

Dam. I said. ,46 in not a 42. Dam you tube

hi, before working on your machine, wouldn't you like to clean it instead of working in dirt, because it would be much better

As far as the little hole on the top of the transmission what goes there I think a vent line and where does it connect

Get a little better camera man lol good video tho pretty helpful

I was looking for a video showing the removal of the spring and engaging cable.... Thanks, it looks like I can do that...Good video...I have the Cub Cadet LTX 1042, same set up...

Yep it’s heicol time and might as well do both holes

3 screws on each deck belt cover as grass will push the cover up that gets caught under them . The new cub cadest at least have the new covers that don't allow that to happen They are metal and have openings to allow grass to be pushed out . I am having problems with the belt coming off and the screws to the belt holders keep coming down and rubbing on the pulleys . I ordered the new covers for my 2016 cub cadet hydrostatic since the screw holes match it . I am hoping that will solve the problem of the belt coming off while mowing . I also had to level the deck side to side

try cleaning the grass off

Thank You! 86 caravan key doesn't work

Thanks. Having same issue🤣

Wooow wooow wooow I would I could have found this video before I spent 65.00 great video

Super bro

Much appreciated. Got an 80’s coupe deville with the same issue.

Thank you!! I can relate so much. Im 22, I just bought my first car 5 months ago, it's a 1998 Mercury Grand Marquis and it drives beautifully. But I work night Audit for hotel so I ran a few errands last night within the hour before work and must have run something over because this morning when I was going to drive home I noticed both tires on the passenger side of the car were flatt. And of course no key for the car. Being in a small town with no local bus or taxi, and my job is in the boonies away from my home I prefer not walking back and forth to work. You saved me a pain for sure

Lol

Have you found a key & locks to put the hubcaps back on?

Are you allowed to touch them?