Welcome to the official IKA RU-vid channel for laboratory, analytical and processing technology - the place to share our mutual passion for innovation, design, quality and lifestyle combined in our outstanding products.
The IKA laboratory and analytical technology division offers a wide range of innovative equipment for numerous applications in research and development. We have gained a leading position in the world market with our innovative and futuristically designed products, created not to only serve the lab, but to also represent a lifestyle of pleasure and fascination.
The process technology division of IKA offers turnkey solutions and state-of-the-art manufacturing options. Our high-quality solutions range from high shear mixers, to jet flow agitators and ready-for-use process plants.
Today, more than 900 employees at thirteen locations give their best in designing and developing our great products and proven application solutions all around the world.
HOLA BUENAS TARDE MIRA YO FABRICO UNA CREMA ANTIFLAMATORIA QUE SIRVE PARA ARTRITIS DOLORES MUSCULARES Y OSEOS Y NO SE COMO VENDERLA YO LE DI A LA GENTE QUE SUFRE DE ESOS DOLORES Y DA MUY MUY BUENOS RESULTADOS
The Midi MR 1 digital can stir volumes up to 50 liters. If, however, heating is required as well, the RCT basic might be the right device for your applications, depending of the viscosity of your liquids. Please reach out to our team at sales@ika.de so we can best understand your requirements and give you a detailed consultation to find the right device for you. Thank you 🙂
You can either purchase the dispersing tool via our online shop: www.ika.com/en/Products-LabEq/Dispersers-pg177/S-50-N-G-45-M-Dispersing-tool-8003300/ or simply reach out to our sales team at sales@ika.de. You can find an overview of all our different dispersing tools on our website: www.ika.com/en/Products-LabEq/Dispersers-pg177/Accessories-cspacc.html
Hi there, we offer attractive calibration packages for all models. You can find an overview here: www.ika.com/ika/pdf/calibration-and-maintenance-contract/Pette_Calibration_Packages_A4_IWS_EN.pdf. There is no video but if you have any questions, please feel free to reach out to sales@ika.de 😊
My name is Hossein Khoddam, the director of Iman Darman Jam Company in Iran. I used to work with your company through Markus Winter, which ended in 2019 due to the embargo. But I have a very good market for your products. I used to be responsible for selling and distributing many of your products through the sales representative of IKA company. We can deliver your goods by EX-WORK term. Prepare an exit permit ourselves(EX-1). The money will be paid to your account by German banks in Europe. I am waiting for your good news. Of course, I sent a message to your colleague(Elke May) by e-mail that they informed me that it is not possible for now, but because of the good market I have, please accept my request again. I currently work for some German companies. Your sincerely , Hossein Khoddam
For further details regarding manufacturing, please get in touch with the Guangzhou Renault Biotechnology Co., Ltd here: www.renaultbio.com/contactus.html For more info on the machines, please visit www.ikaprocess.com ☺
I have a problem with this calorimeter, which is as follows. When I do the experiment, no filling with oxygen occurs, even though the solenoid valve for the oxygen open and I hear the sound of the oxygen filling, and therefore in the end the sample does not combust.
Thank you for your question 🙂The pipette tip cone filter serves to protect the pipette from contamination or corrosion when pipetting aggressive solvents or solutions that produce corrosive vapours and against accidental back splashes during the pipetting process. It is not a must to use it, but recommended to do so to protect the pipette and prolong its lifespan.
Nous vendons les appareils pour la fabrication de produits cosmétiques. N'hésitez pas à nous contacter pour plus d'informations : process@ika.de ou info@renaultbio.com pour plus d'informations sur les produits cosmétiques présentés dans cette vidéo. Merci 🙂
1:35, Hipster science hottie smiling his secret smile down on ... whatever it is he's working on. .. Don't drink that frothy thing, Hipster Science Hottie! It is NOT FOOD.
Hello I am Amin Hosseini a laboratory operator who uses calorimeter model C2000. After calibrating the device with three tests for benzoic acid sample in isoparabolic mode of 25 degrees, the device was used for calorimetry of coal and biscuit samples in the same mode, but unfortunately, the final result showed a negative number for each. The terms of use for two separate samples of coal and biscuit were done exactly according to the video on your website channel. In addition, 5 ml of distilled water was poured into the tank for each test. Operational photos and general results and calibration are attached for better understanding. number of 6 and 7 in expriment library are samples of coal and biscuit ,I want the reason for the strange and negative numbers in the final result and to fix this problem. Thank you very much
Hello I am Amin Hosseini a laboratory operator who uses calorimeter model C2000. After calibrating the device with three tests for benzoic acid sample in isoparabolic mode of 25 degrees, the device was used for calorimetry of coal and biscuit samples in the same mode, but unfortunately, the final result showed a negative number for each. The terms of use for two separate samples of coal and biscuit were done exactly according to the video on your website channel. In addition, 5 ml of distilled water was poured into the tank for each test. Operational photos and general results and calibration are attached for better understanding. number of 6 and 7 in expriment library are samples of coal and biscuit ,I want the reason for the strange and negative numbers in the final result and to fix this problem. Thank you very much
Our headquarters are located in Staufen, Germany but we have subsidiaries worldwide 🙂 Here you can find all local contacts: www.ika.com/en/Contact/IKA-addresses-cch-1.html
Our headquarters are located in Staufen, Germany but we have subsidiaries worldwide 🙂 Here you can find all local contacts: www.ika.com/en/Contact/IKA-addresses-cch-1.html
The magic PLANT has a useful volume of up to 2 liters. You can also find the technical data of the plant here: www.ikaprocess.com/en/Products/Pilot-plants-cph-40/magic-PLANT-csb-MAGICPLANT/Technical-Data-cspt.html
Dear Mr Levine, thank you for your comment. There are different reasons why the generator might get stuck. In order to help you fast and efficient, please reach out to our service department at service@ika.de or you can find your local address or phone number here: www.ika.com/de/Kontakt/Kontaktadressen-cch-1.html We are more than happy to help you solve this issue 🙂
Tja..Was man nicht alles in den Rührer packt.. Wenn das alles aber Probleme macht, ist man aufgeschmissen. Und "aktualisieren Sie Ihre Software beim Magnetrührer" hört sich an wie WLAN im Wasserkocher..
Danke für Ihren Kommentar🙂Unsere Magnetrührer und dessen Bestandteile sind von höchster Qualität und die Langlebigkeit unserer Geräte ist uns sehr wichtig. Sollte trotzdem mal etwas nicht funktionieren wie es soll, steht Ihnen unsere Service Abteilung gerne zur Verfügung und repariert das Gerät. Sollte dies nicht möglich sein, finden unsere Mitarbeiter gemeinsam mit Ihnen eine passende Lösung. Die Aktualisierung der Software stellt sicher, dass alle Funktionen reibungslos ausgeführt werden können. Bei Fragen zu unseren Geräten kontaktieren Sie uns gerne unter sales@ika.de.
Es gibt nur drei Hersteller von guten Laborgeräten. Einer davon ist IKA. Es befinden sich unzählige IKA-Laborgeräte in Europäischen oder US-Laboren, sowie in Labore weltweit. Dies bedeutet für mich, dass deren Qualität nicht so schleckt sein kann, wie hier suggeriert. Hinzu kommt, dass ich selbst bereits mit unzähligen IKA-Geräten gearbeitet habe und sie durchweg weiterempfehlen kann. Es sind sehr gut durchdachte und auch formschöne Geräte.
Gracias por sus comentario. Sin embargo, no producimos nosotros mismos los cosméticos. Fabricamos los equipos de producción para la fabricación de cosméticos. Póngase en contacto directamente con Guangzhou Renault Biotechnology Co., Ltd si desea obtener más información sobre los productos fabricados. Si está interesado en nuestros equipos, envíenos un correo electrónico a process@ika.de.
Thank you for your question 🙂Our devices support a great variety of applications such as the ones you mentioned. Please visit our website for more info on the devices: www.ika.com/en/Products-Lab-Eq/ For further details regarding manufacturing, please get in touch with the Guangzhou Renault Biotechnology Co., Ltd here: www.renaultbio.com/contactus.html
The SPP is a mixing plant for the production of emulsions and suspensions in many areas of application. You can also find more information here: www.ikaprocess.com/en/Products/Process-plants-cph-18/Standard-Plant-SPP-csb-SPP/
Great work. You showed how you can transform a standard lab equipment into a innovative product. Scalability, Add-on, user friendly interaction, modern design... Well done!
The form factor is very nice. I think this would be an even better product if it was automation friendly. Meaning you could communicate with it via a microcontroller or PLC to start on and stop, control the speed, and direction. This product is almost perfect.
Thank you very much for your comment. The device was developed to grow algae in sea water, which easily attacks metal parts (is corrosive) over time and the initial main species grown with this device are sensitive to metals. An inert system was required and realized based on the centuries of experience of Professor Carmelo growing sensitive algae species. The University has tested this system initially and is still using several systems for many years now without any problems. Countless sterilizations have been performed since as well. We also offer other photo-bioreactor solutions at different volumes, such as our new device HABITAT which does not use teflon: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nwqZ3n0p_KU.html Even special requirements can be realized in many cases. Our Bioreactor specialists will be happy to find a perfect solution for your application needs. Please feel free to contact us for further questions at sales@ika.de.