Wow i love this video i was wondering how to uograde the 15-30j powerkit from mcsus ive purchased the gun in the video and the powerkit and another tuning barel which will add another 10j in top of 30j and im guessing removing the thing inside the brass cap is what everyone calls the valve delete which will bring your 7j to 11-15j??? Then the tuning barel seems a easy diy then theres a firing pin everyone else says to do it makes the co2 do more even shots or something.
So removing restrictor will increase kt to 11j from 7? I guess all is basically 11j with a restrictor. After that I have a 15 to 30j power kit and another 30 to 40j range barrel kit if I combine it with power kit. So is it worth all of the kits? Plus ima do an hpa build. But if I carry edc no need for tank 40 joules sound crazy already.
Doesn't the item that you inserted into the co2 chamber, limit the pressure just like the item you removed from the back of the barrel? What's the point? It's still not full power of the co2.
Once the regulator is taken out, if you don't put that piece in the valve, all your air comes farting out on the first and only shot. You have to put the new one in once the valve block/regulator is removed, or there isn't any controlled release for multiple shots. It's one giant shot, and you're done. That piece is crucial once the manufacturer's one is taken out of the valve. However, since your valve chamber is now about 5× bigger, it can push more air into the valve per shot, making it only about 15 powerful shots instead of 30+ weaker shots.
Hello, thank for upload your video... very much... I want to ask you if according to your experience you trust round peppers, since in many videos I have seen that in the first few seconds NOTHING HAPPENS... (zero effect), until you they say to the volunteer: "Stay there, still" and after a few seconds the volunteer begins to cough, sneeze or his eyes itch... (expected effects). This is a serious problem, because the bad guys DO NOT STAY HERE... On the contrary, he will be fast and go for you, while the supposed gas cloud is behind him... The other thing is that sometimes (seen in another video), the round pepper does not explode on the chest... Then, after several tests, it does not explode, but bounces off the chest... and it is necessary for the volunteer to put a board on the chest, so that it explodes , and again zero effect, until they order him to stay put, or even ask him to please take a deep breath... and then he starts to cough, etc. So a round of hard plastic gives me more confidence to hit the assailant. directly in the face than this round pepper... Not counting that Byrna has a larger round (not 50, but cal 68), with which there is more content... it is very little 50... I I share one of the videos of failures (I'm interested that you don't watch the failure of the weapon that is surely due to misuse, but the failure of the round peper and its effect) and give me your opinion, because we trust you friend... they are the best ... I leave you the video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HetsFTBhj44.html&ab_channel=hard2hurt
Because the export valve that comes in the riotball manufactured kit is actually 1mm *bigger* than the original, and they don't want you to see that part. lol. Believe me, I did a ton of research, bought one, disassembled the entire thing, heated up the valve to remove the pin's locktite, got it out (with still damaging it slightly because it's softer aluminum), and when I compared them A to B, the one that comes in the kit is actually longer, not shorter. They don't want you to see/know about that part.
After this upgrade what's the benefit and what was the part placed above the co2 sleve ? I didn't see it removed during Disassembly? Good video and it doesn't look to hard to do. You must build them lol with your knowledge of the inevitable workings.
Lo mas probable es que el kit solamente se inventò para sacarnos dinero. fuera real el aumento de potencia habria videos del antes y despues midiendo la velocidad y joules.
I appreciate your effort in attempting to teach us how to upgrade the Umarex T4E HDP, however with no discussion/details of what you are doing and why this video is of very limited use. If the person, performing the upgrade isn't into discussing his actions, have a second person provide a voice-over of what he is doing and why. The ProPower+50R/50P Export Valve kit, on the Riot Balls website, shows three pieces - yet the guy only made use of two pieces; did he forget to install a piece? Also, how does installing a piece in the long end of the CO2 barrel replace removing a piece from the short end of the CO2 barrel? Could use a listing (in the description) of all the tools involved; a view of the upgrade kit (prior to installation); a test fire of the pistol (with chronograph results and stating what ammo used) before the upgrade; a view of the piece removed; and a test fire (with chronograph) after the upgrade, using the same ammo. Any chance you could update this video and the description?
Да ! Это было бы очень полезно для тех кто смотрит это видео ! Спасибо автору комментария за комментарий и автору видео за видео , надеемся на видео с обновлением !!! Всем мир друзья!
@@dangerous8333 probably not, but I find it helpful to provide vocal cues when it comes to imparting important and consequential info; like when you're not satisfied with how a particular gal - guy(?) performs fellatio, communication is key. Not calling you gay, but remaining PC in the case that you are; can't be too careful in this climate.
Anyway I took apart my HDP and now I see what he did. But what I'm wondering is is it possible to unscrew the black CO2 cylinder from the main valve? It seems to turn halfway then get stuck
Also I want to agree yet again. I was sent this video from their website. Their website shows 3 components and in this video he doesn't install one of the components. I cannot figure out what this component is supposed to do. Yet again I am feeling clueless. UPDATE: Ok I figured it out. These pins go into the plunger but its hard to see using a flashlight. Changing pins is a pain in the arse, the pre-installed pins you have to heat up glues that might be carcinogenic. And the threads are fragile so you have to install it with glues. The pins are the most challenging component to install, so they omitted it from the tutorial. Instead of that, I wish they just pre-installed the pins into the plungers and sold the plungers. From what I've seen online, the longer pins seem to give a power boost of several joules on the first few shots but have more joule variation. Medium length pins give less of a power boost but more consistent joules for every shot. The shortest pins don't seem to give much power boost or consistency.
If I send my pistol to you could you do the upgrade for me? I have very little using my right and left shakes too bad to even attempt this. I would gladly pay you handsomely for time and parts.
If you don't have the hand strength or stability to do some simple repair/upgrade work, you definitely don't have the hand strength or stability to be holding and shooting safely and not hitting people behind the target.... think again and consider a taser.
@@PureChivalry To be fair. He probably has more of an issue when using fine motor skills. Like holding small parts, screws, springs etc. Holding a pistol would probably be different and since it's a non-lethal pistol, not as big of an issue. Tasers suck. Also, he might just be using it for Target practice or for home defense.
@@dangerous8333 You must not be a gun owner, bc what you said was incredibly stupid. "It's just a less lethal, so it's not as big of an issue." Excuse me, did you read the words less lethal? Less means not as much, lethal means deadly. There is no such thing as a non fatal pistol. Just because something is less lethal, doesn't mean it can't kill someone. You need to have dexterity to operate a weapon. I recommended him a taser, because it takes no skill to operate. I wouldn't even recommend pepper spray for him because if he has arthritis or for whatever reason, he doesn't have the finger strength to pull the trigger. If he can't turn a screw, you really want to risk his life giving him something that most likely won't work for his situation? You are either fucked in the head, or uneducated. That's jacked up dude.
There are numerous other videos on RU-vid showing that. I almost never find a perfect video. As a Craftsman I almost always have to use a mixture of videos to figure things out completely.
@@FoundingRU-vidr-2005 I'm curious if that changes the law, I mean it's a less then lethal weapon, by messing with to make it more powerful does that screw you?
@@FoundingRU-vidr-2005 For HDR you need the valve pin,a tuning barrel with extension and to remove the valve block and you get up to 30 joules.Depends also much on the ammo.
@@kendarr Talking about it like you are is what causes problems. If everyone just knew how to treat these types of mods and not chit chat about it and put things in writing where the algorithm and bots can find it then chances are the normal everyday people won't even know.
