Thanks for showing all, you are the best! But i have problem with injectors. Injectors don't get the signal/voltage and they do not open. Maybe you know what could be the problem?
I used w208 driveshaft with shortened back section and welded in a new bearing support when I put 5speed gearbox from w208, now I just replaced front section that was shorter(I do not know from what car that came off because the guy I bought it from also didn't know)
Hello. I have a CLK 2.3k engine and I would like to put it in a W201 1.8 manual. Will the gearbox go from 1.8 to 2.3k? The Clk has an automatic gearbox, and the W201 has a manual 4b.What engine mounts you use?
Great Work! very valuable. Is the wiring the same for a motor with automatic transmission? Do you have a pinout from the ECU with only the necesarry wiring? I started as well.. Big Thanks.
Awesome work Man! I am just about to start my project with swapping an m111 from w203 to my w201. Thanks for every video and for sharing knowledge. I Hope for a new video soon!
glad to help, w203 has a newer ecu but the gist is the same, feel free to contact me if you need anything(also, watch out for the front oil sump setup)
The question is : how did you know that sis yiu ask some one teache you tgise or you read a manual on foeoum ...thank you thank yoi a lote please jus give us the reffencw of thia knowledge ❤❤❤
All cuts were made by "trial and error", I cut a bit off and if it didn't fit I cut a bit more. Since there are differences(year of production) in w126 speedo construction some need more/less cutting
@@davidb3541 those pcb boards are simple, if you want you can trace all leads you cut out and connect them back by soldering regular wires to them. but most leads on the "top" of the w126 speedo board are for blinker lights
Hi! Big thanks for makeing this video, but i run in to a problem... I connected all the wires like you showed, everything seems to be okey, but my ignition key just dont turn. Like something is mising... where do i need to search for problem?
Did everything as you described, kept the metal ignitiom box to be sure. But when i turn the K40 on (ignitiom on) i only hear a buzzing sound from the electronic throttlebody. When i put 12v on the purple (starter) wire the 038 relay is keeps clicking, but nothing else happens. Do you have an idea what my problem could be?
Did everything as you described, kept the metal ignitiom box to be sure. But when i turn the K40 on (ignitiom on) i only hear a buzzing sound from the electronic throttlebody. When i put 12v on the purple (starter) wire the 038 relay is keeps clicking, but nothing else happens. Do you have an idea what my problem could be?
yes, but you need different flywheel since 6speed from m111 has shorter input shaft(if your m102 gearbox already has a short input shaft, like on the diesel with dual-mass flywheel, it will bolt on) keep in mind that the driveshaft is different
Amazing help! Thanks for taking the time to record this for people who are not to deep in this topic. With this video, nearly every mechanic should be able to run this engine in any car:-) Do you have any experience with the M111 say the 220E from the W124 for example? Is the wiring similar? Thinking about another W201 with the none boosted engine for my wife🤣
6speed does not have any speed sensors. I am using rear abs sensor signal and feeding it into W126 electronic speedo via "signal converter"(in my case, Dakota Digital sgi100-bt)
Cool idea, with the cable eliminated. Do you know the donor, the gearbox came from? There’s a few 6 Speed gearboxes available, but not sure, which one would suit best…is the car you are installing this, your 230 kompressor 190?
Thank you very much for your effort of recording this. It is a big help for us old skool guys, who are not so familiar with the modern electronics... Seems to make this swap a lot more interesting and doable. Is it easy to get these donor cars in your area?
Good video, it would be awesome to know part numbers, of both transmission and driveshaft and then which clutch and flywheel you are using as well. As i'm going through the swap right into a 5 speed now, then later down the road the same m111k with a 6 speed.
