So that's a squirrel cage! Have you tried using a coil as a receiver see if you can get any induction might be the Nikola Tesla motor you're searching for. He would have made it wireless. Your squirrel cages are perfect. I bet it works out for you

scooter motor be like this

Thank you for this video!!!

But wait, you say N inside and S outside. This means magnets are axial, not radial. Radial magnets would show both poles on the big face. I know radial magnets give AC in a disk setup. I was thinking the drum would give DC because both brushes would be in the same relative position. But you actually use axial magnets, right ? Anyway, I'll have to try my toy...

to get the voltage between axles you need to switch the magnetic polarity on one side then it will work as expected

Where can i get these magnets ? All i can find are small junky ring magnets

Tension=E is directly proportional to frequency and inversely to wavelength, i.e.SIZE, diameter of the Faraday´s disk

Hello sorry just seen your video. I have run a motor on disruptive discharge, my video is in the link.

Nice and useful video

How long it rims or to stop?

This is impossible unless there is a third force present, like gravity, the elusive aether. A normal homopolar will open a gateway to the aether, whatever that may be but bit works 😂 thanks for the vid.

i wonder what would happen if you connected the faraday disks with a glass tube, like in the early static generators?

You can do that also with the axle from a wind turbine. Then it spins also without the wind .the wind is then only the starter.One serpent coil to drive the shaft and three serpent coils for generate your home.

Good demo showing conductive chain method to eliminate friction at the rim.

This is EXACTLY how the mach 15 US military rail gun works. Same principle. EDIT: love it BTW

That is weird that it has coil core...then you need a really good wind.

So if the magnetic field isn’t intrinsic to the magnet itself and actually an induced field in the space around it I wonder what happens if you spin the copper disk and magnet together while simultaneously moving the whole generator through space. Think like 3 generators on a planetary gear.

Wow no current. Just voltage.and it's producing torque

Awesome video. Keep up the good work

This would be more interesting and engaging if you narrated what you were doing in real time, instead of just printing text on the screen. All good wishes.

hello, nice video , thank u so much , but i have one comment plz, u was saying in the title that the rectifier transform Ac to 12v Dc , but thats not what happened, in the video the rectifier transform voltage to 30v Dc and 60 v Dc later on, so to be carefull,this output Dc should not be connected to batteries ..thank u

Spring 2022 is already passed - and there is still no update on our Newman inspired motor? Rest assured it is coming. We have progressed a lot, unfortunately with no time to document it. But it will be done.

From where to order REQUEST TO INFORM ORDER DETAILS

Is it possible to go from thé dc system back to tree fase? I have An vevor and it's only two wires and not very effectieve.. i thought first ti use a buck booster but it interfears with thé controler. So i was thinking why not rewire and go back to tree phase or is that not done!? Thank you greetz

The magnetic field is going into the cage and the Cu tubes ( rods) are crossing it at high speed and therefore creating the voltage you measure. The field is exiting through the side dishs and creating the voltage you measure over the side dishs. Nothing strange at all. It is one big misunderstanding.

There is no reason to rotate the magnets. The voltage is created in the Cu plate as it rotate through the magnetic field. The field is not rotating regardless of the magnets are rotating or not. What you are doing muddle up what really is happening.

Why do you rotate the magnets? It does not make any difference. The field does not rotate.

whatIfThisIsCombinedWithAVanDeGrafGenerator?

You are most likely measuring stray magnetic field lines being picked up by your probes. You should repeat the experiments with fixed magnets (only the conducting disk rotating).

I wish you had more experimental evidence to support this theory. By the way your experiments are wonderfull. But to me there are still many options open. For example, what is this contact zone exactly? Why do the <horizontal connecting bars between the 2 discs> not create a contact zone? Because no current flows? But why does the current not flow in the fixed horizontal bars? The difference between the horizontal co-rotating bars and the contact brushes could be: 1 if there is a speed differential with the disc or not. 2 rotation speed differential. 3 difference in electrostatic potential. 4 difference in work dissipation (the voltmeter dissipates energy, the brushes have sparks and emit more stuff due to inefficiency of contact). 5 on/off sliding contact vs. continuous contact. 6 permanent influence of earth magnetic field or gravity field on the brushes vs. rotating influence on the bars. I guess current flows in the brushes because they dissipate the energy more effectively (after which you get the contact zones) and the horizontal bars are too efficient, they equalize and balance the energy too much.

Due to the difference in impedances of air and metal, on the energy wave... you have a train of transient reflected waves... which in the air we see as a party of sparks!

Could you use impulse electricity in the form of a spoked rotor like a commutator that cuts the connection and then reconnects it after x degrees of rotation or a capacitor that captures the dc impulse

Where do you get radial magnets? They are hard to magnetize that way. Can somebody post a link please

spin 2 disk opposite direction of each other

I'm somewhat surprised that you said it matched the rated output. The maximum speed for a wind turbine is reckoned to be somewhere around 600 RPM, yet you had the generator running at 2000 RPM and it didn't blow the 40W lamp? It looks like in a real world application the generator would struggle to produce maybe 40W. I do acknowledge though that the bell wire sized extension wires that you used for both the three phase and DC to the lamp too would cause a fair voltage drop at the current draw of a few amps, and thus reduced power at the lamp...

Bhai ji mereko bhejo ye altrinetr

Did you ever find a way to get tension at the axle with two discs connected at the rim? Its been a while since I have explored this topic and I don't think I'd be able to find it just by browsing your videos.

If his magnet motor requires electrical input,then it is not perpetual motion,it must work without electricity,without water or wind or hard,it should only run by magnets and nothing else.

There's is no relative motion between the magnets Ang the coppers that why there's is no voltage difference between the axle and outside rim the magnet should be stationery while the copper disk is rotating so to cause a voltage difference to imanate

Great video, Im glad I ran across your channel. Finally someone who actually knows what they are doing! I saw some poorly connected wind turbine videos saying the product was poor. Education obviously helps. Lol My favorite was the testing on the roof of a car ( I just purchased the same model) there was about ten feet of romex, probably 14-3 coiled up in the seat connected to the meter and battery. Hmm I wonder why the output sucked? Lol. The turbine I have says 600w but looks identical to the one you just showed. ( I took mine apart too ) even the same off red wires. Look forward to exploring your channel ! Thanks!

Why are carbon brushes not being used instead of copper?

It would have been better if you explained VERBALLY what you were doing, as I am more of a LISTENER than a watcher. I don't know why so many of you don't speak, it would have been better.

Sir im your new subscriber please test the amps load sir thank you

How much wind pushes as quickly as a drill; Looks like a Mains powered Drill so 240V to 12 to 5 volts

We are still working on another video for our Modified Newman motor addressing the various questions as well as new findings. Should be coming out in spring 2022.

We are still working on another video for our Modified Newman motor addressing the various questions as well as new findings. Should be coming out in spring 2022.

Nice series. But I am not yet convinced that the probe cutting the magnetic lines explains the voltage. What if you have the same relative motion, but with the disk stationary and the probe spinning around? I did a response video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VVBzlLhS8c4.html

Who much lbs (or kg) coil of this motor have? What gauge of wire coil as well?

Very cool.