Here are 7 steps you can try to resolve the problem from hp support. 1.Turn off the Printer: Turn off the printer and unplug it from the power source. This will ensure your safety and prevent any further damage. 2. Remove and Clean the Printheads: If possible, remove the printheads (cartridges) and clean them. Use a lint-free cloth and distilled water. Gently wipe away any excess ink. Be careful not to touch the nozzles or other sensitive parts. Allow the printheads to air-dry before reinstalling them. 3. Check for Ink Residue: Make sure there is no ink residue inside the printer. Clean any spilled ink carefully. You can use a lint-free cloth or cotton swabs for this purpose. 4. Reset the Printer: After cleaning, plug the printer back in and turn it on. Try to perform a reset if your printer has that option. Refer to your printer's manual for instructions on how to reset it. 5. Check Cartridge Status: Ensure that the cartridges are correctly installed, and there are no obstructions. Make sure that they are securely in place. 6. Check Paper Path: Ensure that there are no paper jams or other obstructions in the paper path. Open the printer and check for any bits of paper or foreign objects. 7. Printer Status: If the printer status still shows as Busy, it's possible that there is an internal issue. Try turning off the printer, unplugging it, and leaving it unplugged for a few minutes before plugging it back in and turning it on. I hope this helps.
Sd card problem sir. Subukan muna i-remove ang sd card tapos balik, tapos i-format at tingnan ang status sa sd card sa settings kung good ba. Kung hindi posibli peke ang sd card.
Posibli nasa motor ang problema sir. Kung meron marunong gumamit ng tester dyan mas mabuti kung ma check ang resistance sa windings at hindi ba grounded. Panoorin kung paano i-check sa videong ito sir. Salamat ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PCuHndULLBw.htmlsi=AOkIa6yBmUnEtvN8
Posibli nasa motor ang problema mam. kung meron marunong gumamit ng tester dyan mas mabuti kung ma check ang resistance sa windings at hindi ba grounded. Panoorin kung paano i-check sa videong ito ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PCuHndULLBw.htmlsi=AOkIa6yBmUnEtvN8
What is this video trying to show us I’m so Curious. Are you just demonstrating how to bend rebar? Why are you demonstrating how to bend rebar? Is it for people who don’t know you can Bend rebar?
Nalilito din ako, kasi kung good ang sd card tapos naka blue lahat sa box tapos nafinalize mo napindot mo ang check sa upper right side sa app. Wala ng ibang dahilan siguro mahina wifi ninyo sa gabi.