Email me at: davidmehood@gmail.com If you would like to help here are my links. DONATE HERE: www.paypal.com/donate?hosted_button_id=GNJBCD3JLQ9E4 Cash app cash.app/$hoodscustomshop PayPal www.paypal.me/davidmehood
If this type of inverter produces voltage between the neutral and ground terminals, then it seems to me that voltage could be detected on the frame of your RV. Have you used a Fluke VoltAlert non-contact voltage testing pen (or similar product) to test if current is flowing to the frame or outside metal skin of your RV?
I know this is a couple years old but please do not disconnect ground first when working with AC power. DC power = remove ground first, AC Power = remove hot first.
I notice that your countertop is above the bottom window frame by about 4 inches ? What if one of the windows is severly damaged from outside, how will you remove the damaged window frame with the edge of the countertop backsplash being in the way ?
If you want to add a rear deck but don’t want it sticking out as you drive down the road, why not build one that has hinges where it attaches so when you’re ready to go, just fold it up against the back door & latch it in securely in place?
I bought a new fuse box and pin connector, rewired it and it worked beautifully, a year later it did it again. Don't know what to do anymore. I'm thinking of rewiring it to an external fan relay and seeing what happens. If anyone has done that before, mentor me 🙏 please!!. Thinking it's very possible. However, don't know if it will mess anything up if I do it 😮 🤔
I have essentially done the same thing you did last year. Bought a new fuse box from the dealership, new connector and repinned wires. Worked beautifully. However, melted pins again a year later just now.I'm thinking of rewiring it to an external fan relay and seeing what happens. If anyone has done that before, mentor me 🙏 please!!. Thinking it's very possible. However, don't know if it will mess anything up if I do it 😮 🤔
I know this was a couple years ago I havent seen any other f/u video. However, did you check connecter plug to your fan? There are 4 spots in plug but only 3 needed. Maybe one of them burnt?! If so, theres an extra core in the plug, has piggy tail on it. Remove bad core and replace. Im so curious as to what the problem was
Aluminum dust is probably why this isn't commonly done. A 20 sheet paper shredder from the goodwill, would keep up with family supply of cans. And if you got a cement mixer and a torch, a bunch of the plastic can be burnt off, lessening dross in the crucible later on.
Nice set up. Wandering did you constructed trailer - set of wheels are positioned to far behind so weight of the load is not properly distributed - most of weight is on the towing hook which is wrong and dangerous!
Nice job but something you did scared me because I almost got killed doing it. When you pull a drill chuck out of your work piece hold onto it. If the morse taper pulls out of the tail stock and the drill is still in the piece that chuck assembly will start whipping around and get thrown at you. Don't ask me how I know. LOL Mine busted the morse taper right off the chuck when it hit the bed and threw the chuck over my shoulder and went through a cabinet door I had on the other side of my shop. Almost had to go and change my pants.
😢 Remember kids always unplugged the Spark plug sometimes the machine will accidentally start if you unjamming stuck pieces it from the woods chipper.. Safety 101 OHSA training ahhhhhhhhhhh