Dear,this is the old style version, i suggest you buy below new style. (F25 NBT) www.pempcar.com/products/bmw-x3-f25-nbt-ultra-thin-12-3 (F25 CIC) www.pempcar.com/products/bmw-f25-cic-12-3
I just installed yesterday. And I am not getting audio. I tried the AUX cord and nothing. The optical fiber cord is connected good. It played music one time after I turned the car off it stopped again
Please select the OEM's AUX menu before each entry into the Android. If it still can't be solved, please contact our after-sales service team at service@pempcar.com
Sorry, this one not sell on amazon europe. but below link you can buy . i will send it to you from CHINA. www.pempcar.com/products/bmw-e90-cic-10-25 it support your bmw e92 cic
Yes, the video is great. It's just that his product has a hard time installing the SIM card after the installation is complete. Whereas the PEMP has the SIM card on the top of the product, ready to be dialed out or inserted.
@@pempcar thanks sir, installation was perfect. I have an issue now, everytime I power off the car the system is shutdown, so when i start the car it has to boot completely, taking like 30 seconds. Is there any way to avoid this? Cant find any option in Factory settings.
@@whoisthezator Yes, Android boot time is taking 30-40 seconds. It's unavoidable. But you can set it to show the OEM screen every time you boot. It might help you. Of course another way is to buy a Linux product which takes only 5 seconds to boot. You can avoid this problem, but the Linux product is simpler, it only has CarPlay Android auto function. www.amazon.com/dp/B0D5J3PVPF
@@pempcar it 100% doesn't have the aux option which is why I'm confused, it has an aux input about an inch to the right of the dvd input which I've never seen on any of the videos when I look up the 06 525i but I don't know what else that input can be because an aux cord fits perfectly in there, it just doesn't have the aux option
My center Controller doesn‘t Work the Control thing in front of the armrest and there is no audio when i Connect with CarPlay(is that maybe cause i didn‘t Connect aux and Audio Output )
Yes, when you activate it, be sure to disconnect the negative battery terminal. Refer to step 4. Step4: (important )!! After activation, keep connected, wait for 5 seconds, then turn off and lock the car and let it sleep for 15 minutes. Disconnect the negative pole of the car battery for another 1 minute and then connect it back. Then get on the car and check the aux audio was display, if the aux audio also display. It has stored your AUX AUDIO menu.
if buy a Linux Screen, please connect the GROUND A and GROUND B togther on the ISO wires, You can also send the order number and issue to our after-sales service team at service@pempcar.com Solve it for you.
Yes, Linux can also do CarPlay with Android auto functionality; it's just that it can't install any software like RU-vid or map APK. android screen has built in GPS navigation and you can plug in a 4G SIM card to get internet. If you just want CarPlay functionality, linux is more cost effective.
I have a C250 2013, When I change it to AUX it doesnt play any sound from ZLINK, if I leave as Bluetooth and change it in Spotify, I can control Spotify though ZLink and play it, but I always have to change to MB Bluetooth. When it is in AUX, no sound is played at all.
Dear, you need to disconnect the OEM car Bluetooth from your cell phone and only let it connect to YeeHung's Bluetooth. Please also set AUX to manual mode in factory settings. settings/factory settings/190627/vehicle/aux switch model/manul
Have you connected the three wire terminals of red, white and black correctly? I hope you can refer to the following video to connect it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FGvNNRAMPcU.html
@@yashkashyap3151 Yes, you will need to choose these toggles based on the size of your car's model and display. You can refer to the item description on Amazon to set it up . www.amazon.com/dp/B0CGLLSK2F
You can restore the factory settings by clicking Recovery in the System info menu. If touch is not available, you can try using a mouse plugged into the USB port and you will surely be able to select it successfully.
Yes, this part is for C-Class W204. Please note that if your car is NTG 4.0, please use the LVDS box with NTG 4.0, otherwise it cannot display OEM display info.
@@pempcar yes, thats will do nicely. thats the one thing about aftermarket stuff, they tend to make the car look non factory and sloppy with things hanging out of everywhere. we can lose that g4 box too or place it in a less conspicuous area. thank you
@@pempcarThe F32 2018 and up models have a thicker front grill than the older models, so the front camera clip won’t fit on the grill at the front, so you’ll have to modify the clip for people who have a 2018 and up F32 model. And I think for easier installation, they have a side mirror cover for the cameras that clips into the side mirrors. And send me a link for the new Ultra-Thin 12.3" Android Screen on your BMW F32 NBT EVO.
I have a question before but it for my series 6 2006, does it work with Bluetooth? Can I pair my iPhone to the adapter and stream music ? Or it’s just to have a jack 3.5mm adapter?
Its main function is to activate the AUX menu of the OEM interface, if your car has an AUX menu, you don't need to buy it. Sorry, it doesn't have Bluetooth. It only has a 3.5mm connector.
If NO signal is displayed in the OEM interface, you can select another correct resolution in the Car display in the factory settings. If you still can't solve the problem, please contact our after-sales service team at service@pempcar.com
Hello i want install on this device a front camera. Do i need plug it on ff-cam. I installed already the back camera because this was easy but i dont now the connection of the front camera.
Yes, you need to connect the front camera to FF-CAM, you can refer to the following description to do so. But note: PEMP Android screen it only supports front view camera in AHD format. www.amazon.com/dp/B08YWSL269?ref=myi_title_dp&th=1
If I have a damaged CD changer, can I replace it with this device? The menu has CDC options, but currently due to a measuring device failure it is grayed out. If I completely disconnect the changer and plug in this device, will I get an AUX input?
