athe

#include <Servo.h> #define trigPin 12 #define echoPin 11 Servo servo; int sound = 250; void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { Serial.println("the distance is less than 10"); servo.write(90); delay(1500); } else { servo.write(0); } if (distance > 60 || distance <= 0){ Serial.println("The distance is more than 60"); } else { Serial.print(distance); Serial.println(" cm"); } delay(500); }

Sir we need this product where I have to bye this product please 🙏 tel me

U send me this product ful i will give u changes sir

#include <Servo.h> #define trigPin 12 #define echoPin 11 Servo servo; int sound = 250; void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { Serial.println("the distance is less than 10"); servo.write(90); delay(1500); } else { servo.write(0); } if (distance > 60 || distance <= 0){ Serial.println("The distance is more than 60"); } else { Serial.print(distance); Serial.println(" cm"); } delay(500); }

#include <Servo.h> #define trigPin 12 #define echoPin 11 Servo servo; int sound = 250; void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { Serial.println("the distance is less than 10"); servo.write(90); delay(1500); } else { servo.write(0); } if (distance > 60 || distance <= 0){ Serial.println("The distance is more than 60"); } else { Serial.print(distance); Serial.println(" cm"); } delay(500); }

Thanks

tinyurl.com/58h8bjft

Use the same code It will work on both Arduino Uno and Nano

code link in the description box

​@@HPINVENTIONS linke not opening

@@priyankas-jx4pe #include <Servo.h> #define trigPin 12 #define echoPin 11 Servo servo; int sound = 250; void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { Serial.println("the distance is less than 10"); servo.write(90); delay(1500); } else { servo.write(0); } if (distance > 60 || distance <= 0){ Serial.println("The distance is more than 60"); } else { Serial.print(distance); Serial.println(" cm"); } delay(500); }

#include <Servo.h> #define trigPin 12 #define echoPin 11 Servo servo; int sound = 250; void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { Serial.println("the distance is less than 10"); servo.write(90); delay(1500); } else { servo.write(0); } if (distance > 60 || distance <= 0){ Serial.println("The distance is more than 60"); } else { Serial.print(distance); Serial.println(" cm"); } delay(500); }

Thanks

❤️

❤️

message us on instagram @hp_inventions

message us on instagram @hp_inventions

Used a power bank

Front emblem Form sheet vach tanne cheytata

@@HPINVENTIONS thanks bro 👍

In this video I tells exactly how to make it, just do it bro😊

Just copy it and paste in IDE

ru-vid.com3WpcGL-17iM?feature=share

Ok!brother thanks project is now working.

🥰

Both are correct

@@HPINVENTIONS ok

🥰

Korachkoodi thickness ulla form sheet vach cheyt nook bro

@@HPINVENTIONS bro njan vadikalil vekkuva rebar bush ittekkuva

#include <Servo.h> #define trigPin 12 #define echoPin 11 Servo servo; int sound = 250; void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); servo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { Serial.println("the distance is less than 10"); servo.write(90); delay(1500); } else { servo.write(0); } if (distance > 60 || distance <= 0){ Serial.println("The distance is more than 60"); } else { Serial.print(distance); Serial.println(" cm"); } delay(500); }

Use jumper wires

Not for sale bro 🥰

filmora x

Athe bro